2010 Chevrolet Camaro Tire Pressure Warning Light Stays On

Resolve Tire Pressure Warning Light in 2010 Chevrolet Camaro

Find Repair Location
Reviewed by
Devin Cabugcal
Written by RepairPal Car Genius
Updated January 14, 2025
0%
40% chance it's the
Tire Leaking Air
0%
30% chance it's the
Wheel Leaking Air
0%
15% chance it's the
Tire Pressure Monitoring System
0%
15% chance it's
Something else
The most common reasons a 2010 Chevrolet Camaro tire pressure warning light stays on are a leaking tire, a wheel that no longer holds air, or a faulty tire pressure monitoring system.
  • Tire Leaking Air: A puncture, valve stem issue, or rim damage can cause a tire to leak air, leading to loss of pressure.
  • Wheel Leaking Air: A puncture or damage to the tire or rim can cause air to leak, resulting in a loss of tire pressure.
  • Tire Pressure Monitoring System: A malfunctioning tire pressure monitoring system can be caused by faulty sensors or a dead battery in the sensor units.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

How much does it cost to fix a 2010 Chevrolet Camaro tire pressure warning light stays on?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

When a tire pressure monitoring sensor fails, the tire pressure monitoring system control module will recognize a loss in communication and turn on the warning lamp which indicates the failure. This is most often the case. However, the tire pressure monitoring sensor may also fail by reporting incorrect tire pressures. This could cause a flat tire to go unrecognized, or a properly inflated tire to signal a low or high tire pressure warning.

When a relearn is needed, for any reason, the TPMS warning light will illuminate, and many vehicles will display a message relating to the TPMS system being inoperative or loosing communication. It is important to keep a watchful eye on tire pressures when this system is having issues because there is no warning available for underinflation or overinflation of the tires.

The only symptoms requiring diagnosis for the tire pressure monitoring system warning lamp is if the warning lamp has illuminated while the tires have correct air pressure, or if the air pressure for the tires is out of specification and the warning lamp is off. This is because the overwhelming majority of cases where the TPMS lamp illuminates is due to the change in ambient temperature.

What steps should I take to diagnose the tire pressure warning light issue in my 2010 Chevrolet Camaro?

To effectively diagnose the tire pressure warning light issue in your 2010 Chevrolet Camaro, begin with a straightforward diagnostic approach that prioritizes simpler solutions before delving into more complex assessments. Start by checking the tire pressure in all four tires using a reliable tire pressure gauge, ensuring that the readings align with the recommended PSI found in your owner's manual or on the driver's side door jamb. Next, visually inspect each tire for any signs of damage, such as punctures or bulges, which could indicate a loss of pressure. Don’t overlook the valve stems; check them for any leaks or damage, as these can also lead to air escaping and trigger the warning light. If these initial checks do not resolve the issue, utilize an OBD-II scanner to identify any fault codes related to the tire pressure monitoring system (TPMS), which can provide insight into the underlying problem. In some cases, simply resetting the TPMS may rectify the warning light, so consult your owner's manual for the specific reset procedure. If you still encounter difficulties after these steps, it may be time to seek assistance from a certified mechanic or dealership for a thorough inspection and repair. By following this methodical approach, you can efficiently diagnose and address the tire pressure warning light issue in your Camaro.

What could be causing the tire pressure warning light to stay on in a 2010 Chevrolet Camaro?

When the tire pressure warning light remains illuminated in a 2010 Chevrolet Camaro, it can indicate several common problems that DIYers should be aware of. One of the most frequent culprits is low air pressure in one or more tires, which can easily be checked with an air pressure gauge. Additionally, a depleted battery in a tire pressure sensor or a malfunctioning TPMS receiver module can also trigger this warning light. Extreme temperature fluctuations can affect tire pressure, leading to discrepancies that may cause the light to stay on. Other issues might include slow tire leaks, problems with the spare tire, or even faulty sensors. If you've recently rotated your tires, ensure that the sensors are properly adjusted, as misalignment can also lead to persistent warnings. In cases where recalibration does not resolve the issue, it may indicate a damaged sensor or a malfunctioning TPMS module, which could require professional inspection. Addressing these problems promptly is crucial for maintaining the safety and performance of your vehicle.

How urgent is it to address the tire pressure warning light on a 2010 Chevrolet Camaro that stays on?

Addressing the tire pressure warning light on a 2010 Chevrolet Camaro is crucial for several reasons. First and foremost, low tire pressure can significantly compromise vehicle safety, affecting handling and braking performance, which increases the likelihood of accidents, particularly in critical driving situations. Additionally, driving on underinflated tires can lead to uneven wear, necessitating premature tire replacements, which can be costly. Furthermore, low tire pressure negatively impacts fuel efficiency, resulting in higher fuel costs over time. Lastly, if left unaddressed, continued driving with low tire pressure can cause severe tire damage, including the risk of blowouts while on the road. Therefore, it is essential to check and adjust the tire pressure as soon as the warning light remains illuminated, ensuring both safety and cost-effectiveness in vehicle maintenance.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.