2020 Chevrolet Blazer Cruise Control Isn't Working

Common Causes of Cruise Control Malfunctions in Your 2020 Chevrolet Blazer and How to Fix Them

Find Repair Location
Reviewed by
Bo Fader
Written by RepairPal Car Genius
Updated January 14, 2025
0%
30% chance it's the
Sensor
0%
25% chance it's the
Control Module
0%
25% chance it's the
Throttle
0%
20% chance it's
Something else
The most common reasons a 2020 Chevrolet Blazer cruise control isn't working are failed control module, sensor or switch issues, or throttle actuation problems.
  • Sensor: A faulty or malfunctioning sensor can lead to incorrect readings, causing issues with engine performance or other systems relying on accurate data.
  • Control Module: A faulty control module can lead to erratic vehicle behavior or failure of various electronic systems due to improper signal processing.
  • Throttle: A faulty throttle body or a defective accelerator pedal position sensor may be causing inconsistent throttle response.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

How much does it cost to fix a 2020 Chevrolet Blazer cruise control isn't working?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

When the vehicle speed sensor fails or the wiring harness prevents signal transmission, the speedometer is the first thing that will stop functioning properly. This can be an intermittent issue where the speedometer only works occasionally, the speedometer may cease all function, or the speedometer may read erratically or incorrectly. Also, the traction control and anti lock brake warning lights specific to each vehicle may be illuminated, depending on the design of those systems. You may notice the vehicle hesitate to accelerate, cruise control will not function properly, and the vehicle may not shift properly through all of the gears.

In the event that a wheel speed sensor fails, the ABS, traction control system (TCS) and manufacturer specific stability control system lights will illuminate, informing the driver that the systems are disabled. The vehicle will be more prone to tire slip, and normal driving patterns may need to be adjusted to correct for the loss of computer control. On older vehicle's, the speedometer can be affected, causing illumination of the check engine light as well.

The cruise control switch can cause complete failure of the cruise control feature, but in a lucky scenario only partial functionality will be lost. This means that the cruise control may come on, but that it will not increase in speed automatically, or the cancel button does not work leading the driver to cancel cruise control with the foot brake. In some vehicles, the cruise control light may illuminate, or a warning message may be displayed due to lack of functionality.

What steps should I take to diagnose the non-functioning cruise control in my 2020 Chevrolet Blazer?

To effectively diagnose the non-functioning cruise control in your 2020 Chevrolet Blazer, begin with a systematic approach that prioritizes simpler checks before delving into more complex diagnostics. Start by inspecting the cruise control fuse located in the fuse box; a blown fuse is an easy fix that can often resolve the issue. Next, examine the cruise control buttons on your steering wheel for any signs of sticking or damage, as these can hinder functionality. Following this, verify the speed sensor's operation, since a malfunctioning sensor can disrupt the cruise control system. It's also crucial to check the brake pedal switch, which is designed to disengage cruise control when pressed; ensure it is functioning correctly. If these initial checks do not reveal the problem, utilize an OBD-II scanner to identify any error codes that may provide insight into the issue. Additionally, inspect the cruise control module for any visible damage or corrosion, ensuring all connections are secure. If you still cannot determine the cause of the malfunction, it may be time to consult a professional mechanic or dealership for further assistance. By following this structured diagnostic approach, you can efficiently identify and address the issue with your cruise control system.

What are the common problems that could cause the cruise control to stop working in a 2020 Chevrolet Blazer?

When troubleshooting the cruise control system in a 2020 Chevrolet Blazer, it's essential to consider several common problems that may be at play. One of the first areas to check is the brake pedal switch, as a faulty switch can prevent the cruise control from engaging, since the system is designed to deactivate when the brake is pressed. Additionally, issues with the speed sensor can disrupt the cruise control's functionality, as it relies on accurate speed readings to maintain the desired speed. A blown fuse is another straightforward issue that can halt the cruise control system, so inspecting the fuses related to this feature is a good starting point. Furthermore, if the cruise control module itself is defective, it may not respond to commands, leading to frustration for the driver. Lastly, electrical problems, including faulty wiring or poor connections, can also contribute to cruise control malfunctions. By systematically checking these components, DIYers can often identify and resolve the issue, restoring the cruise control functionality in their Blazer.

How urgent is it to address the malfunctioning cruise control in a 2020 Chevrolet Blazer?

Addressing a malfunctioning cruise control in a 2020 Chevrolet Blazer is of utmost urgency due to the significant safety risks it poses. A faulty system can lead to unexpected acceleration or deceleration, increasing the likelihood of accidents and compromising driver control. Additionally, a malfunctioning cruise control can detract from the overall driving experience, making it challenging to maintain a consistent speed, which can lead to fatigue on long journeys. Promptly resolving this issue is crucial not only for maintaining the vehicle's performance and efficiency but also for preventing further damage to the vehicle's systems. Neglecting these symptoms could result in more severe and costly repairs down the line, making it essential for Blazer owners to prioritize addressing cruise control malfunctions to ensure their safety and the longevity of their vehicle.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.