2010 Chevrolet Aveo5 Tire Pressure Warning Light Stays On

Resolve Tire Pressure Warning Light in 2010 Chevrolet Aveo5: Causes and Solutions

Find Repair Location
Reviewed by
Andrew Hajjar
Written by RepairPal Car Genius
Updated January 14, 2025
0%
40% chance it's the
Tire Leaking Air
0%
30% chance it's the
Wheel Leaking Air
0%
15% chance it's the
Tire Pressure Monitoring System
0%
15% chance it's
Something else
The most common reasons a 2010 Chevrolet Aveo5 tire pressure warning light stays on are a leaking tire, a wheel that no longer holds air, or a faulty tire pressure monitoring system.
  • Tire Leaking Air: A puncture, valve stem issue, or rim damage can cause a tire to leak air, leading to loss of pressure.
  • Wheel Leaking Air: A puncture or damage to the tire or rim can cause air to leak, resulting in a loss of tire pressure.
  • Tire Pressure Monitoring System: A malfunctioning tire pressure monitoring system can be caused by faulty sensors or a dead battery in the sensor units.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

How much does it cost to fix a 2010 Chevrolet Aveo5 tire pressure warning light stays on?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

When a tire pressure monitoring sensor fails, the tire pressure monitoring system control module will recognize a loss in communication and turn on the warning lamp which indicates the failure. This is most often the case. However, the tire pressure monitoring sensor may also fail by reporting incorrect tire pressures. This could cause a flat tire to go unrecognized, or a properly inflated tire to signal a low or high tire pressure warning.

When a relearn is needed, for any reason, the TPMS warning light will illuminate, and many vehicles will display a message relating to the TPMS system being inoperative or loosing communication. It is important to keep a watchful eye on tire pressures when this system is having issues because there is no warning available for underinflation or overinflation of the tires.

The only symptoms requiring diagnosis for the tire pressure monitoring system warning lamp is if the warning lamp has illuminated while the tires have correct air pressure, or if the air pressure for the tires is out of specification and the warning lamp is off. This is because the overwhelming majority of cases where the TPMS lamp illuminates is due to the change in ambient temperature.

What steps should I take to diagnose the tire pressure warning light issue on my 2010 Chevrolet Aveo5?

To diagnose the tire pressure warning light issue on your 2010 Chevrolet Aveo5, start by checking the tire pressure to ensure it meets the manufacturer's recommended levels, which can be found in the owner's manual or on a sticker inside the driver's side door. If the pressure is correct but the warning light remains illuminated, proceed to reset the Tire Pressure Monitoring System (TPMS), which may involve locating a reset button or following a specific procedure detailed in your manual. Should the light persist after resetting, inspect the TPMS sensors for any signs of damage or malfunction, as faulty sensors can trigger the warning. If the light is blinking, this indicates a more urgent issue, such as significantly low tire pressure, necessitating an immediate stop to check and inflate the tires as needed. Remember, it’s essential not to ignore the tire pressure warning light, as doing so can lead to serious safety risks, including tire failure and overheating. By following this diagnostic approach, you can effectively address the tire pressure warning light issue and ensure your vehicle remains safe and roadworthy.

What could cause the tire pressure warning light to remain on in a 2010 Chevrolet Aveo5?

When the tire pressure warning light remains illuminated in a 2010 Chevrolet Aveo5, it signals a need for immediate attention to ensure safe driving conditions. The most common issue is low tire pressure, which can be easily resolved by checking and inflating each tire to the recommended levels found in the owner’s manual. If the tire pressure is adequate, the next step is to examine the tire pressure sensors, as a malfunctioning sensor may require replacement. Additionally, recalibrating the tire pressure monitoring system can often fix the issue, a process that can usually be done by following the vehicle's manual instructions. It's also important to consider potential electrical problems, such as a blown fuse or damaged wiring, which may necessitate a thorough inspection of the vehicle's electrical components. If these steps do not resolve the warning light issue, the tire pressure monitoring system itself may be malfunctioning, indicating a need for diagnostic testing to pinpoint the exact problem. By methodically addressing these common issues, you can effectively troubleshoot and resolve the tire pressure warning light concern in your Chevrolet Aveo5.

What immediate actions should be taken if the tire pressure warning light remains on in a 2010 Chevrolet Aveo5?

When the tire pressure warning light remains illuminated in your 2010 Chevrolet Aveo5, it is crucial to act promptly to ensure your safety and the longevity of your vehicle. Ignoring this warning can lead to dangerous driving conditions, such as reduced traction and increased tire wear, which may ultimately result in a blowout or loss of control. Start by checking the tire pressure in all four tires with a reliable gauge, ensuring they meet the manufacturer's specifications found in your owner's manual or on the door jamb. If you discover any tires are underinflated, inflate them to the correct PSI using an air compressor or a gas station air pump. Additionally, visually inspect each tire for any signs of damage, such as punctures or bulges, as these can compromise your safety and necessitate repair or replacement. Once you have addressed any pressure discrepancies or damage, reset the tire pressure monitoring system according to your vehicle's manual. If the warning light persists despite these efforts, it is essential to consult a qualified mechanic, as there may be a deeper issue with the monitoring system that requires professional attention. Taking these steps not only enhances your safety on the road but also helps prevent costly repairs down the line.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.