2007 Buick Lucerne Cruise Control Isn't Working

Common Causes of Cruise Control Malfunctions in Your 2007 Buick Lucerne and How to Fix Them

Find Repair Location
Reviewed by
Andrew Hajjar
Written by RepairPal Car Genius
Updated January 14, 2025
0%
30% chance it's the
Sensor
0%
25% chance it's the
Control Module
0%
25% chance it's the
Throttle
0%
20% chance it's
Something else
The most common reasons a 2007 Buick Lucerne cruise control isn't working are failed control module, sensor or switch issues, or throttle actuation problems.
  • Sensor: A faulty or malfunctioning sensor can lead to incorrect readings, causing issues with engine performance or other systems relying on accurate data.
  • Control Module: A faulty control module can lead to erratic vehicle behavior or failure of various electronic systems due to improper signal processing.
  • Throttle: A faulty throttle body or a defective accelerator pedal position sensor may be causing inconsistent throttle response.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

How much does it cost to fix a 2007 Buick Lucerne cruise control isn't working?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

When the vehicle speed sensor fails or the wiring harness prevents signal transmission, the speedometer is the first thing that will stop functioning properly. This can be an intermittent issue where the speedometer only works occasionally, the speedometer may cease all function, or the speedometer may read erratically or incorrectly. Also, the traction control and anti lock brake warning lights specific to each vehicle may be illuminated, depending on the design of those systems. You may notice the vehicle hesitate to accelerate, cruise control will not function properly, and the vehicle may not shift properly through all of the gears.

The cruise control switch can cause complete failure of the cruise control feature, but in a lucky scenario only partial functionality will be lost. This means that the cruise control may come on, but that it will not increase in speed automatically, or the cancel button does not work leading the driver to cancel cruise control with the foot brake. In some vehicles, the cruise control light may illuminate, or a warning message may be displayed due to lack of functionality.

What are the initial diagnostic steps to troubleshoot the non-functional cruise control in a 2007 Buick Lucerne?

When troubleshooting the non-functional cruise control in a 2007 Buick Lucerne, it's essential to adopt a systematic diagnostic approach. Begin by checking the cruise control fuse located in the fuse box, as a blown fuse is a common and easily fixable issue. Next, inspect the cruise control buttons on the steering wheel to ensure they are operational, as faulty buttons can prevent engagement. Following this, verify the speed sensor's functionality, since it is critical for the cruise control system to operate correctly. Utilizing a diagnostic scanner to check for error codes can provide insights into specific malfunctions that may be affecting the system. Additionally, examine the vacuum lines for any leaks or damage, as these can disrupt the cruise control's operation. Finally, ensure that the brake and clutch switches are functioning properly, as these components are designed to disengage the cruise control when activated. By methodically following these steps, you can effectively diagnose and potentially resolve the cruise control issues in your Buick Lucerne.

What are the common problems that could cause the cruise control to stop working in a 2007 Buick Lucerne?

When troubleshooting the cruise control system in a 2007 Buick Lucerne, it's essential to consider several common problems that could be at play. One of the primary culprits is a faulty brake pedal switch, which is crucial for disengaging the cruise control when the brake is applied. If this switch malfunctions, it can prevent the system from engaging properly. Additionally, issues with the speed sensor can disrupt the cruise control's functionality, as the system relies on accurate speed readings to maintain the desired speed. Another potential issue is a blown fuse within the cruise control circuit; checking and replacing any blown fuses can often resolve the problem. If these components are functioning correctly, the cruise control module itself may be faulty and could require repair or replacement. Lastly, vacuum leaks in the engine can also affect the cruise control system, as it operates using vacuum pressure. Identifying and fixing any leaks can restore the system's performance. By systematically checking these areas, you can effectively diagnose and potentially fix the cruise control issues in your Buick Lucerne.

How urgent is it to address the malfunctioning cruise control in a 2007 Buick Lucerne?

Addressing a malfunctioning cruise control system in a 2007 Buick Lucerne is of utmost importance due to the significant safety risks it poses. A faulty cruise control can lead to unexpected acceleration or deceleration, which can result in dangerous driving situations and increase the likelihood of accidents. Ignoring these symptoms not only jeopardizes your safety but can also lead to more extensive damage to the vehicle's components, resulting in costly repairs down the line. Therefore, it is crucial to have the cruise control system inspected and repaired as soon as possible by a qualified mechanic. This proactive approach not only ensures the safe operation of your vehicle but also helps maintain its overall performance, providing peace of mind while driving.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.