The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.
When a tire pressure monitoring sensor fails, the tire pressure monitoring system control module will recognize a loss in communication and turn on the warning lamp which indicates the failure. This is most often the case. However, the tire pressure monitoring sensor may also fail by reporting incorrect tire pressures. This could cause a flat tire to go unrecognized, or a properly inflated tire to signal a low or high tire pressure warning.
When a relearn is needed, for any reason, the TPMS warning light will illuminate, and many vehicles will display a message relating to the TPMS system being inoperative or loosing communication. It is important to keep a watchful eye on tire pressures when this system is having issues because there is no warning available for underinflation or overinflation of the tires.
Wheels offer very few symptoms, but these symptoms should never be ignored. Visible cracks on the wheels may appear, especially after hitting a large bump, Most often, this will also be accompanied by loss of air from the tire on that wheel. Also, vibration in the steering wheel is very common when the tire is out of balance, and improper wheel nuts or bolts can cause creaking and popping noises to develop. Again, there are very few symptoms, but they should not be ignored.
The only symptoms of a TPMS control module failure are failing to alert the driver of underinflation or overinflation of one or more tires, failure to communicate with the body control module or TPMS sensors, or erroneously reporting incorrect tire pressure.
The only symptoms requiring diagnosis for the tire pressure monitoring system warning lamp is if the warning lamp has illuminated while the tires have correct air pressure, or if the air pressure for the tires is out of specification and the warning lamp is off. This is because the overwhelming majority of cases where the TPMS lamp illuminates is due to the change in ambient temperature.
To effectively diagnose the tire pressure warning light issue in your 2012 BMW 740Li, start with the simplest solutions before moving on to more complex diagnostics. Begin by checking the tire pressure in all four tires, ensuring they are inflated to the manufacturer's recommended levels. If the pressure is correct but the warning light persists, inspect the tire pressure sensors for any signs of malfunction. Each tire is equipped with a sensor that can fail, leading to inaccurate readings. Use a reliable gauge to manually verify the pressure and compare it with the readings displayed on your vehicle's information system. If discrepancies arise, it may indicate a problem with the sensors or the control module. In cases where the tire pressure is adjusted but the warning light remains illuminated, consider resetting the Tire Pressure Monitoring System (TPMS) using a scanner or following the specific reset procedure outlined in your owner's manual. If these steps do not resolve the issue, it may be time to consult a professional service center for a thorough diagnosis. By following this structured approach, you can efficiently identify and address the underlying cause of the tire pressure warning light in your BMW.
When the tire pressure warning light stays on in a 2012 BMW 740Li, it can be attributed to several common problems that DIYers can investigate. One of the primary causes is faulty tire pressure, which may stem from under-inflated tires that require immediate attention. It's essential to check each tire's pressure using a reliable gauge, as even a slight deviation from the recommended levels can trigger the warning light. Additionally, atmospheric pressure changes can affect tire pressure readings, particularly if you’ve recently driven to a different altitude. A slow air leak is another culprit that may not be immediately visible; therefore, inspecting the tires for punctures or using soapy water to identify leaks can be beneficial. Furthermore, ambient temperature fluctuations can cause tire pressure to drop, so monitoring the temperature and adjusting tire pressure accordingly is crucial. If these checks do not resolve the issue, consider using an OBD2 scanner or a TPMS reset tool to recalibrate the tire pressure monitoring system, ensuring it accurately reflects the current tire conditions. Regular maintenance and prompt attention to these issues can help maintain optimal vehicle performance and safety on the road.
When the tire pressure warning light illuminates on your 2012 BMW 740Li, it is crucial to act promptly to ensure your safety and prevent potential damage to your vehicle. Start by checking the tire pressure using a reliable gauge, as maintaining optimal pressure is essential for safe driving and tire longevity. Next, visually inspect each tire for any visible signs of damage, such as punctures or bulges, which could indicate a more serious issue. Utilize the iDrive display to monitor the tire pressure readings; this system provides real-time data and can help you identify any discrepancies. If you find that the tire pressure is low, inflate the tires to the recommended levels at a nearby service station. After adjusting the pressure, reset the tire pressure monitoring system through the iDrive interface to ensure accurate readings moving forward. Be vigilant for any persistent warning lights, as they may signal sensor malfunctions or other underlying problems that require immediate attention. Addressing these issues not only enhances your driving experience but also safeguards against potential accidents and costly repairs.
See what others are asking about their BMW 740Li. Get answers from RepairPal's community of auto experts and enthusiasts.
Read about related problems experienced by other BMW 740Li drivers like you.