The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.
When a tire pressure monitoring sensor fails, the tire pressure monitoring system control module will recognize a loss in communication and turn on the warning lamp which indicates the failure. This is most often the case. However, the tire pressure monitoring sensor may also fail by reporting incorrect tire pressures. This could cause a flat tire to go unrecognized, or a properly inflated tire to signal a low or high tire pressure warning.
When a relearn is needed, for any reason, the TPMS warning light will illuminate, and many vehicles will display a message relating to the TPMS system being inoperative or loosing communication. It is important to keep a watchful eye on tire pressures when this system is having issues because there is no warning available for underinflation or overinflation of the tires.
Wheels offer very few symptoms, but these symptoms should never be ignored. Visible cracks on the wheels may appear, especially after hitting a large bump, Most often, this will also be accompanied by loss of air from the tire on that wheel. Also, vibration in the steering wheel is very common when the tire is out of balance, and improper wheel nuts or bolts can cause creaking and popping noises to develop. Again, there are very few symptoms, but they should not be ignored.
The only symptoms of a TPMS control module failure are failing to alert the driver of underinflation or overinflation of one or more tires, failure to communicate with the body control module or TPMS sensors, or erroneously reporting incorrect tire pressure.
The only symptoms requiring diagnosis for the tire pressure monitoring system warning lamp is if the warning lamp has illuminated while the tires have correct air pressure, or if the air pressure for the tires is out of specification and the warning lamp is off. This is because the overwhelming majority of cases where the TPMS lamp illuminates is due to the change in ambient temperature.
To effectively diagnose the tire pressure warning light issue in your 2013 BMW 740i, start with a thorough visual inspection of your tires for any signs of flatness or significant pressure loss. If you notice any abnormalities, it’s advisable to add air to the affected tires, which can often resolve minor pressure issues. Next, consider the functionality of the Tire Pressure Monitoring System (TPMS) sensors, as these can wear out over time, typically after five to seven years of use. If the sensors are malfunctioning, they may provide inaccurate readings, so manually checking the tire pressure with a reliable gauge is essential. Additionally, inspect the TPMS control module, as issues here can also trigger the warning light. Utilizing an OBD device can help you read diagnostic trouble codes (DTCs) to pinpoint the problem more accurately. Addressing these issues promptly is crucial, as it not only ensures the reliability of your tire pressure monitoring but also enhances your vehicle's safety and performance on the road.
When the tire pressure warning light remains illuminated in a 2013 BMW 740i, it often indicates underlying issues that require attention. The most prevalent cause is low tire pressure, which can easily be checked with a reliable gauge. If the pressure is found to be below the recommended levels, simply inflating the tires can resolve the warning. However, if the tire pressure is adequate, the problem may lie within the tire pressure monitoring system (TPMS) itself. Malfunctioning sensors can lead to inaccurate readings, causing the warning light to stay on even when tire pressure is normal. In such cases, inspecting the TPM sensors for any signs of damage or failure is crucial. Additionally, the TPMS may need to be reset or recalibrated to ensure it functions correctly. By systematically checking tire pressure and the TPM system, DIYers can effectively diagnose and address the issue, ensuring safe driving conditions.
When the tire pressure warning light illuminates on your 2013 BMW 740i, it is crucial to act promptly to avoid potential safety hazards and further vehicle damage. Start by checking the tire pressure of all four tires, as driving on under-inflated tires can lead to decreased handling, increased tire wear, and even blowouts. If you find any tires are low, inflate them to the recommended pressure indicated on the vehicle's sticker. This simple step can often reset the warning light. Additionally, it’s important to reset the tire pressure monitoring system (TPM) through the iDrive menu, ensuring that the system accurately reflects the current tire conditions. Neglecting these steps not only compromises your safety but can also lead to costly repairs down the line. Therefore, addressing the tire pressure warning light should be a priority for any responsible vehicle owner.
Read about related problems experienced by other BMW 740i drivers like you.
See what others are asking about their BMW 740i. Get answers from RepairPal's community of auto experts and enthusiasts.
