The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.
Inability to control the windshield wipers comes in several forms, and they are all indicative of windshield wiper switch failure. The windshield wipers may not work in all settings, may not turn on when requested, may not move to their parked position when turning off, or the washer pumps may or may not run at random. This is a general list of symptoms, but failure of anything the windshield wiper switch controls will indicate the need for testing the windshield wiper and washer switch.
A failed windshield wiper motor will do one of two things in the event of failure. First, it can intermittently work, meaning when the wiper switch is turned on, the windshield wipers may activate, and run for a random amount of time. This may happen at random, or change with a bump. Lastly, the windshield wipers could show no signs of activity, indicating motor failure.
The moment water touches the windshield, you know if you need new windshield wiper blades. If your wiper blades are torn, cracked, hard, or brittle, it is time for replacement. Wipers should also be replaced if the wiper blades only smear water around, seem to make a mess, streak the windshield, and miss large patches. If you are unhappy with the current wiper blades on your vehicle, this is a very economical change to make.
Windshield wiper arms will be replaced mainly for aesthetic reasons or damage. If the windshield arms become bent or rusted, the windshield wipers may not contact the windshield at the proper angle, or there may be no contact at all. Also, the sun will take a toll on these parts after years of use, and fading or clear coat peeling will result, not to mention rust.
When troubleshooting non-functional windshield wipers in your BMW 535i, it's essential to adopt a systematic diagnostic approach that begins with the simplest solutions before progressing to more complex issues. Start by checking the wiper motor; if there’s no response when activated, this could indicate a failure. Next, inspect the wiper blades for wear, as damaged blades can impair visibility and should be replaced if necessary. Following this, examine the wiper relay located under the left side dash; a faulty relay can disrupt the wiper's operation, so testing it by pulling relays 2 and 3 can help identify the problem. Additionally, ensure that the wiper arms are properly aligned and securely fastened, as loose or misaligned arms can lead to ineffective wiping. If the arms themselves are cracked or damaged, they may not apply adequate pressure to the blades, necessitating replacement. Given the age of the BMW 535i, consider the possibility of underlying electrical issues that may be affecting the wipers. If these basic troubleshooting steps do not yield results, consulting a professional mechanic is advisable, as they can provide a thorough diagnosis and recommend appropriate repairs. By following this structured approach, you can effectively identify and resolve the issues with your windshield wipers.
When troubleshooting windshield wiper issues on a BMW 535i, it's essential to identify the common problems that may be affecting the wiper system. Begin by inspecting the wiper motor, as a failure here can completely disable the wipers. Next, evaluate the wiper switch, which controls the operation; a malfunctioning switch may fail to send the necessary signals for activation. It's also important to check the fuse associated with the wiper system, as a blown fuse can interrupt power and stop the wipers from functioning. The wiper sensor is another critical component; if the wipers act erratically or do not respond, the sensor could be the issue, especially if the wipers operate normally when the sensor is bypassed. Finally, examine all electrical connections for any signs of damage or corrosion, ensuring that voltage is present at the connector leading to the wiper motor. By systematically assessing these components, you can effectively diagnose and resolve the issues impacting your BMW 535i's windshield wipers.
When your BMW 535i's windshield wipers fail to operate, it is crucial to address the issue promptly, as neglecting it can lead to serious safety hazards. Inadequate visibility during rain or adverse weather conditions can significantly increase the risk of accidents. A malfunctioning wiper motor, blown fuse, or faulty wiper switch are common culprits that can disrupt wiper functionality, and if left unchecked, these problems may escalate, potentially causing damage to other electrical components or the wiper system itself. Additionally, worn wiper blades can compromise your ability to see clearly, making it essential to replace them regularly. If you notice any signs of wiper failure, such as inconsistent movement or complete stoppage, it is advisable to seek professional assistance to diagnose and resolve the issue before it leads to more severe consequences. Prioritizing the repair of your windshield wipers not only ensures your safety but also helps maintain the overall integrity of your vehicle.
Not sure what's wrong?
Get help from a trusted expert
See what others are asking about their BMW 535i. Get answers from RepairPal's community of auto experts and enthusiasts.
Read about related problems experienced by other BMW 535i drivers like you.