How do I know if my 2011 Bmw 128i has a recall?

To know if your 2011 Bmw 128i has an open recall, start by entering your vehicle's VIN or license plate in our Safety Recall Checker. We will find recalls that affect your vehicle and need to be repaired.

How do I check my VIN for recalls for free?

Check your 2011 Bmw 128i VIN for free by entering it into our Safety Recall Checker.

What happens if my 2011 Bmw 128i has an open recall?

If your 2011 Bmw 128i is affected by a recall, it means that NHTSA and the manufacturer have identified an issue with your vehicle. After you check your vehicle, you can contact a dealership to schedule a repair.

How long does a recall take to fix?

How long it takes to fix a recall depends on the exact repairs needed. Something simple like a software update can be done in minutes, but complex mechanical repairs may take days or weeks. Ask the dealership when you schedule your appointment.

Do you need a warranty for a recall?

Your 2011 Bmw 128i does not need to be under warranty to get recalls fixed. Recalls for safety-related items on your 2011 Bmw 128i are taken care of by Bmw at no cost to you even if your vehicle warranty has expired or if you are not the original owner of the vehicle.

How long does a recall last on a car?

A recall does not expire as long as the vehicle manufacturer remains in business or continues to make the replacement parts. Generally, recalls can be fixed for free up to 15 years after your car's date of manufacture.

Recalls

Model Recalls By Year

Terms·Privacy·Cookie Policy

Verifiable Consumer Access and Deletion Request Form

Why should you check for safety recalls?

Road Safety Risks

Open recalls can be dangerous for you and your family.

Mail Delays

Older or used cars can be more difficult for manufacturers to locate.

Risk of Costly Damage

We'll connect you with a dealership near you to fix the recall at no cost.

2011 Bmw 128i

9 Recalls

NHTSA 23V-707

Camshaft Timing Adjustment Bolts Loosen And Break Causing Engine Stall

157,796 Potential Units Affected

Loose or broken VANOS unit bolts can result in an engine stall, increasing the risk of a crash.

Vehicles Affected: 2010 BMW 535i xDrive, 2010 BMW 328i and 44 others

NHTSA 22V-119

PCV Valve Heater May Short Circuit

917,106 Potential Units Affected

An electrical short can cause the PCV valve heater to overheat, increasing the risk of a fire while driving or, soon after driving when parked.

Vehicles Affected: 2010 BMW 535i xDrive, 2010 BMW 328i and 81 others

NHTSA 20V-017

Driver's Frontal Air Bag Inflator Ruptures During Deployment Spraying Metal Fragments

59,965 Potential Units Affected

An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.

Vehicles Affected: 2010 BMW 328i, 2012 BMW 328i and 68 others

NHTSA 19V-579

Blower Wiring Harness Wiring Overheats

41,981 Potential Units Affected

Wiring that overheats could cause the electrical connectors to melt, and increase the risk of a fire, even when the vehicle is unattended.

Vehicles Affected: 2010 BMW 128i, 2011 BMW 128i and 8 others

NHTSA 17V-683

Positive Crankcase Ventilation Valve Heater Short Circuits And Melts

740,561 Potential Units Affected

An electrical short can cause the parts within the PCV valve to melt, increasing the risk of a fire, even when the vehicle is not in use.

Vehicles Affected: 2010 BMW 328i, 2011 BMW 328i and 28 others

NHTSA 16V-071

Driver's Frontal Air Bag Inflator Ruptures And Sprays Metal Fragments

840,000 Potential Units Affected

In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator could rupture with metal fragments striking the driver or other occupants resulting in serious injury or death.

Vehicles Affected: 2010 BMW 328i, 2012 BMW 328i and 79 others

NHTSA 14V-176

Engine Timing Bolts May Loosen And Break

156,137 Potential Units Affected

If the bolts loosen or break the engine may have reduced power or stall. An engine stall increases the risk of a crash.

Vehicles Affected: 2010 BMW 328i, 2011 BMW 328i and 20 others

Recalls

BMW 128i Recalls by Year

2013 BMW 128i Recalls

2012 BMW 128i Recalls

2011 BMW 128i Recalls

2010 BMW 128i Recalls

2009 BMW 128i Recalls

2008 BMW 128i Recalls

Model Recalls By Year

Recall FAQs

If your 2011 Bmw 128i is affected by a new safety recall, Bmw will attempt to contact you by sending you a notice in the mail. This notice will detail the defect, when parts for repair will be ready, how to get your car fixed, and whether your unrepaired car is currently safe to drive or not.

If you aren't the original owner, have changed addresses, or have never visited your local dealership for service or maintenance, then you most likely will not receive a recall notice in the mail.

Another way to know whether your 2011 Bmw 128i has an open recall is to enter your VIN or license plate into the RepairPal Safety Recall Checker above. The VIN (Vehicle Identification Number) is a 17-digit alphanumeric code that can be found on the bottom edge of your car's windshield, on the driver's side. It can also be found on your vehicle's registration card.

You can check your 2011 Bmw 128i for recalls by entering your VIN or license plate into the RepairPal Safety Recall Checker found above. The VIN (Vehicle Identification Number) is a unique 17-digit alphanumeric identification code on the bottom edge of your car’s windshield, on the driver’s side. It can also be found on your vehicle’s registration card.

Checking your VIN is the best way to find out if your car is affected by any recalls. Identical vehicles of the same make, model, year, and trim may not be affected by the same recall. A VIN is unique to a specific vehicle.

Your 2011 Bmw 128i is affected by a recall if the manufacturer or the National Highway Traffic Safety Administration (NHTSA) has decided that a problem with your car makes it a safety risk or fails to meet safety standards. When this happens, the vehicle manufacturer is obligated to fix your vehicle.

Normally, you will receive a letter in the mail that explains the recall and how to get the defect fixed promptly and at no charge to you. The letter will explain what the exact defect is, when the parts will be ready, how to get your car fixed, and whether your car is safe to drive or not.

But in many cases, the manufacturer won't know you own an affected vehicle, which is why you should check your 2011 Bmw 128i for safety recalls frequently.

Use our Safety Recall Checker to check your 2011 Bmw 128i for open recalls.

How long it takes to fix a recall depends on many different factors:

How many vehicles are affected by the recall? How complex is the problem to fix? How many different parts are involved in the repair? Are the repair parts available? Has the dealership received the parts for the repair yet? Do dealership technicians have training to conduct the specific repair? How many recalled cars can the dealer repair each day (while also doing their daily service business)?

Recalls are unrelated to your warranty coverage. Any recalls that are issued for safety-related items on your 2011 Bmw 128i will be repaired by the vehicle manufacturer at no cost to you. Even if your vehicle's warranty has expired and you are not the original owner of the vehicle, you are still eligible to have any open safety recalls on your vehicle repaired.

You can check for any open recalls on your 2011 Bmw 128i by entering its VIN (Vehicle Identification Number) or license plate number into the RepairPal Safety Recall Checker above. If there are any open recalls on your vehicle, contact a dealer as soon as possible to have repairs done.

Safety recalls that address a defective part or system on your 2011 Bmw 128i that came from the factory do not expire and can generally be fixed up to 15 years after the date of manufacture. Even if you are not the original owner, you can have repairs done to resolve any open recalls. This is important, especially if the recalls are safety-related. The only exceptions are if the carmaker is no longer in business or if the dealership can no longer get the needed parts. Recall repairs are generally free up to 15 years after the date of manufacture.

To check whether there are any open recalls on your 2011 Bmw 128i, enter its VIN (Vehicle Identification Number) or license plate number into the RepairPal Safety Recall Checker here. Your 2011 Bmw 128i VIN can be found at the base of the windshield or on your registration card. If there are any open recalls on your vehicle, contact a dealer as soon as possible to have repairs done.

BMW 128i Recalls

Check your specific VIN or plate below.

There are 9 recalls that may affect your 2011 BMW 128i.

Check your BMW 128i for safety recalls and get them fixed for free at a BMW dealership near you.