Audi A4 Tire Pressure Warning Light Stays On

Common Causes for the Persistent Tire Pressure Warning Light in Your Audi A4 and How to Resolve Them

Find Repair Location
Reviewed by
Aisha
Written by RepairPal Car Genius
Updated January 14, 2025
0%
40% chance it's the
Tire Leaking Air
0%
30% chance it's the
Wheel Leaking Air
0%
15% chance it's the
Tire Pressure Monitoring System
0%
15% chance it's
Something else
The most common reasons a Audi A4 tire pressure warning light stays on are a leaking tire, a wheel that no longer holds air, or a faulty tire pressure monitoring system.
  • Tire Leaking Air: A puncture, valve stem issue, or rim damage can cause a tire to leak air, leading to loss of pressure.
  • Wheel Leaking Air: A puncture or damage to the tire or rim can cause air to leak, resulting in a loss of tire pressure.
  • Tire Pressure Monitoring System: A malfunctioning tire pressure monitoring system can be caused by faulty sensors or a dead battery in the sensor units.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

How much does it cost to fix a Audi A4 tire pressure warning light stays on?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

When a tire pressure monitoring sensor fails, the tire pressure monitoring system control module will recognize a loss in communication and turn on the warning lamp which indicates the failure. This is most often the case. However, the tire pressure monitoring sensor may also fail by reporting incorrect tire pressures. This could cause a flat tire to go unrecognized, or a properly inflated tire to signal a low or high tire pressure warning.

When a relearn is needed, for any reason, the TPMS warning light will illuminate, and many vehicles will display a message relating to the TPMS system being inoperative or loosing communication. It is important to keep a watchful eye on tire pressures when this system is having issues because there is no warning available for underinflation or overinflation of the tires.

Wheels offer very few symptoms, but these symptoms should never be ignored. Visible cracks on the wheels may appear, especially after hitting a large bump, Most often, this will also be accompanied by loss of air from the tire on that wheel. Also, vibration in the steering wheel is very common when the tire is out of balance, and improper wheel nuts or bolts can cause creaking and popping noises to develop. Again, there are very few symptoms, but they should not be ignored.

The only symptoms of a TPMS control module failure are failing to alert the driver of underinflation or overinflation of one or more tires, failure to communicate with the body control module or TPMS sensors, or erroneously reporting incorrect tire pressure.

The only symptoms requiring diagnosis for the tire pressure monitoring system warning lamp is if the warning lamp has illuminated while the tires have correct air pressure, or if the air pressure for the tires is out of specification and the warning lamp is off. This is because the overwhelming majority of cases where the TPMS lamp illuminates is due to the change in ambient temperature.

Troubleshooting Tire Pressure Warning Light in an Audi A4

When faced with a Tire Pressure Monitoring System (TPMS) warning light in your Audi A4, the first step is to check the tire pressure in all four tires using a reliable gauge. This ensures that each tire is inflated to the recommended levels specified in your owner's manual or on the sticker located inside the driver's door jamb. If the tire pressure is correct but the warning light persists, the next step is to reset the TPMS. This can typically be done by locating the TPMS reset button, often found in the glove box or beneath the steering wheel. With the ignition turned on (but the engine off), press and hold the reset button until the warning light blinks, indicating a successful reset. If the light remains illuminated after these steps, it may be necessary to adjust the tire pressure again, ensuring all tires are at the correct levels. In cases where the light still does not turn off, it may indicate a more complex issue that requires professional diagnostics, as it could be related to the vehicle's computer system. By following these troubleshooting steps, you can effectively address the TPMS warning light and ensure your Audi A4 is safe and road-ready.

What to Do When the Tire Pressure Warning Light Stays On in an Audi A4?

When the tire pressure warning light stays on in your Audi A4, it’s important to identify the common problems that may be causing this alert. A leaking tire is often the primary reason, as it can lead to a significant loss of air pressure, triggering the warning light. Inspect your tires for visible punctures or damage, as well as checking for any wheel issues that might prevent proper air retention. Another frequent issue is the need to reset the Tire Pressure Monitoring System (TPMS), which can usually be accomplished by turning the ignition to the "on" position without starting the engine and following the reset instructions in your owner's manual. Regularly checking tire pressure is also essential, particularly during colder months when temperatures can cause a drop in pressure. If you’ve ensured that all tires are inflated to the correct levels and the warning light remains illuminated, it may indicate a malfunctioning tire pressure sensor that could require professional diagnosis and repair. By understanding these common problems, you can take proactive steps to troubleshoot and resolve the tire pressure warning light issue in your Audi A4.

Why is the Tire Pressure Warning Light Staying On in an Audi A4?

When the Tire Pressure Warning Light remains illuminated in your Audi A4, it is crucial to address the issue promptly to avoid serious safety risks and potential damage to your vehicle. Ignoring this warning can lead to decreased vehicle stability, increased tire wear, and even blowouts, which can result in accidents. Common causes for the light staying on include leaking tires, wheels that fail to hold air, or a malfunctioning tire pressure monitoring system (TPMS). Additionally, low tire pressure or improper relearning after tire rotation can trigger the warning. Even if your tire pressures appear correct, the light may indicate that your tires are losing air and may need replacement. In some cases, the TPMS sensor itself could be damaged, preventing accurate monitoring. If you have checked your tires and ensured they are properly inflated but the light persists, resetting the TPMS may be necessary. Taking immediate action not only ensures your safety but also helps maintain the overall health of your vehicle.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.