What is your question?
·
·
What is your question?
My Toyota Tacoma acts like it will want to stall or actually stall when the lights are either on, the blower AC/Heater motor or put a turn signal on when lights on it acts like it wants to stall. I just replaced a Heater/AC relay switch could the new one be bad. The altenator and battery have been tested under load and seems to be working fine. I cant figure out the issue. Actually sometimes it works fine, but other times this same issue starts up again and the truck stalls totally or shrugs and acts like it will stall.
1 Reply
Hello, Test the function of your idle air control valve. There are videos showing how to test it online, and describing the testing procedure would be a daunting task. The idle air control valve is controlled by the engine control module, and has to raise the idle when additional loads are placed on the engine. If it does not idle up, you have the situation you described. Since it works sometimes, I bet you have a loose or corroded wire somewhere in the circuit. You can likely solve this issue with some patience, a multimeter, and the repair manual for your truck. Let me know if you need additional guidance.