2020 Volvo V90 Cross Country Has A Vacuum Leak

Diagnosing Vacuum Leaks in Your 2020 Volvo V90 Cross Country and Effective Repair Strategies

Find Repair Location
Reviewed by
Andrew Hajjar
Written by RepairPal Car Genius
Updated January 14, 2025
0%
40% chance it's the
Leaking Vacuum Hoses
0%
30% chance it's the
Leaking Gaskets and Seals
0%
20% chance it's the
Bad Actuators and Valves
0%
10% chance it's
Something else
The most common reasons a 2020 Volvo V90 Cross Country has a vacuum leak are leaking vacuum hoses, leaking gaskets and seals, or bad actuators and valves.
  • Leaking Vacuum Hoses: A cracked or disconnected vacuum hose can lead to a loss of engine vacuum, resulting in poor engine performance and increased fuel consumption.
  • Leaking Gaskets and Seals: Aged or damaged gaskets and seals can lead to fluid leaks, resulting in loss of engine oil or coolant and potential engine damage.
  • Bad Actuators and Valves: A malfunctioning actuator or valve can disrupt the proper operation of the vehicle's systems, leading to issues such as poor engine performance or erratic behavior of components like the HVAC system.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

How much does it cost to fix a 2020 Volvo V90 Cross Country has a vacuum leak?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

Problems with the intake manifold gasket can create the following symptoms:

  • Illuminated check engine light
  • Erratic engine performance
  • Oil and coolant leaks
  • Poor gas mileage
  • Stalling

» LEARN MORE: Intake manifold gasket symptoms

Rough idling, lack of power, engine oil leaks, engine burning oil, and illumination of the check engine light are all possible if the PCV valve has clogged. If the check engine light comes on, the on-board diagnostics (OBD) trouble codes will most likely relate to manifold vacuum, air and fuel mixture, PCV system, mass airflow sensor readings, and exhaust and emissions readings. These are all affected in the event the PCV valve is clogged, is stuck fully open, or is stuck fully closed, however, if the valve is stuck fully open, the engine oil seals are not in danger of overpressure.

A bad valve cover gasket will result in an oil leak. You may notice oil under the car or on other parts under the hood. You might also notice a burning smell while driving.

» LEARN MORE: Signs of a bad valve cover gasket

Any time there is an emissions fault the check engine light will be displayed. The purpose of the check engine light is to inform the driver that an emission related fault has been found, and that there are on-board diagnostic (OBD) trouble codes stored in the powertrain or engine control module. Additionally, since the emissions systems are so intertwined into engine control and transmission control systems, symptoms may include nearly any sort of drivability concerns. This may include harsh shifting, failure to shift, hesitation on acceleration, jerking, engine failure to start or run, loss of power, or any number of other drivability issues.

What are the steps to diagnose a vacuum leak in a 2020 Volvo V90 Cross Country?

To effectively diagnose a vacuum leak in your 2020 Volvo V90 Cross Country, start with a thorough visual inspection of the engine bay. Look for any damaged or disconnected vacuum hoses, as these are often the culprits behind leaks. Next, listen for any hissing noises while the engine is running, as these sounds can indicate escaping air. If you have access to a vacuum gauge, connect it to the intake manifold to check for fluctuations or low pressure, which can further confirm a leak. For a more hands-on approach, perform a spray test by applying carburetor cleaner or propane around the vacuum hoses; a change in engine RPM will signal a leak. If you want a more definitive method, consider conducting a smoke test, which allows you to visually pinpoint the leak's location. Lastly, don’t forget to check for any trouble codes using an OBD-II scanner, as these can provide additional insights into potential vacuum issues. By following this structured diagnostic approach, you can efficiently identify and address vacuum leaks in your vehicle.

What are the common causes of a vacuum leak in a 2020 Volvo V90 Cross Country?

When diagnosing a vacuum leak in your 2020 Volvo V90 Cross Country, it's crucial to understand the common problems that can arise. One of the primary culprits is damaged or deteriorated vacuum hoses, which can crack or become loose over time, allowing air to escape and disrupting the engine's performance. Additionally, a faulty intake manifold gasket can lead to significant leaks, as it seals the manifold to the engine block and can wear out with age. Another area to inspect is the throttle body; if it is loose or damaged, it can also contribute to vacuum leaks. Furthermore, a cracked or malfunctioning vacuum pump can create issues, as this component is essential for maintaining the necessary vacuum levels in the system. Lastly, don't overlook the brake booster, as any leaks or damage here can affect both braking performance and engine efficiency. By systematically checking these components, you can effectively identify and resolve vacuum leaks, ensuring your vehicle runs smoothly and efficiently.

How urgent is it to address a vacuum leak in a 2020 Volvo V90 Cross Country?

Addressing a vacuum leak in your 2020 Volvo V90 Cross Country is crucial for maintaining the vehicle's performance and efficiency. A vacuum leak can lead to symptoms such as rough idling, stalling, and decreased fuel efficiency, which not only affect your driving experience but can also signal underlying engine problems. If left unaddressed, these leaks can escalate into more severe issues, potentially resulting in costly repairs and significant damage to engine components. While it may not seem as urgent as a major mechanical failure, the implications of ignoring a vacuum leak can compromise your vehicle's overall health and safety. Therefore, it is essential to diagnose and repair any vacuum leaks promptly to ensure your Volvo continues to operate smoothly and efficiently. Taking action now can save you from more extensive repairs down the line, making it a wise decision for any DIY enthusiast.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.