Not sure what's wrong?
Get help from a trusted expert
The most common reasons a INFINITI QX60 has a vacuum leak are leaking vacuum hoses, leaking gaskets and seals, or bad actuators and valves.

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.
Problems with the intake manifold gasket can create the following symptoms:
» LEARN MORE: Intake manifold gasket symptoms
When troubleshooting vacuum leaks in your INFINITI QX60, start with a visual inspection of the vacuum hoses and connections. Look for any signs of wear, cracks, or disconnections that could indicate a leak. If the hoses appear intact, check the intake manifold gasket and throttle body for any signs of damage or improper sealing. A simple method to detect leaks is to use a smoke test, which can reveal hidden leaks that are not visible to the naked eye. Additionally, listen for hissing sounds while the engine is running, as this can also indicate a vacuum leak. If you suspect a faulty actuator or valve, consider testing these components individually to ensure they are functioning correctly. By systematically addressing these areas, you can effectively diagnose and repair vacuum leaks, ensuring your vehicle runs smoothly and efficiently.
When tackling the issue of a vacuum leak in your INFINITI QX60, it's essential to understand the common problems that can arise within the vacuum system. A vacuum leak can lead to various performance issues, including poor fuel efficiency, rough idling, and increased emissions. Common failure modes include cracked or brittle vacuum hoses, which can deteriorate over time due to heat and exposure, leading to air leaks. Additionally, gaskets and seals may wear out, causing leaks at connection points. It's also important to consider less frequent issues, such as a malfunctioning intake manifold or throttle body, which can contribute to vacuum leaks. By being aware of these potential problems, you can more effectively diagnose the source of the leak and implement the necessary repairs, ensuring your vehicle runs smoothly and efficiently.
Addressing a vacuum leak in your INFINITI QX60 is not just a matter of routine maintenance; it is an urgent necessity that can have serious implications for both your vehicle's performance and your safety. Ignoring the symptoms of a vacuum leak can lead to increased emissions, which not only risks failing an emissions test but also contributes to environmental harm. Furthermore, a vacuum leak can severely compromise engine performance, resulting in sluggish acceleration and erratic idling, which can pose safety risks while driving. Additionally, neglecting this issue can lead to reduced fuel efficiency, costing you more at the pump and increasing your vehicle's carbon footprint. Most critically, if left unaddressed, a vacuum leak can lead to more severe engine damage over time, potentially resulting in costly repairs that could have been avoided. Therefore, it is essential to act promptly when you suspect a vacuum leak to ensure your INFINITI QX60 remains safe, efficient, and reliable on the road.
Rough idling, lack of power, engine oil leaks, engine burning oil, and illumination of the check engine light are all possible if the PCV valve has clogged. If the check engine light comes on, the on-board diagnostics (OBD) trouble codes will most likely relate to manifold vacuum, air and fuel mixture, PCV system, mass airflow sensor readings, and exhaust and emissions readings. These are all affected in the event the PCV valve is clogged, is stuck fully open, or is stuck fully closed, however, if the valve is stuck fully open, the engine oil seals are not in danger of overpressure.
A bad valve cover gasket will result in an oil leak. You may notice oil under the car or on other parts under the hood. You might also notice a burning smell while driving.
» LEARN MORE: Signs of a bad valve cover gasket
Any time there is an emissions fault the check engine light will be displayed. The purpose of the check engine light is to inform the driver that an emission related fault has been found, and that there are on-board diagnostic (OBD) trouble codes stored in the powertrain or engine control module. Additionally, since the emissions systems are so intertwined into engine control and transmission control systems, symptoms may include nearly any sort of drivability concerns. This may include harsh shifting, failure to shift, hesitation on acceleration, jerking, engine failure to start or run, loss of power, or any number of other drivability issues.
See what others are asking about their INFINITI QX60. Get answers from RepairPal's community of auto experts and enthusiasts.
Read about related problems experienced by other INFINITI QX60 drivers like you.