Wheel Bearing Replacement near Huntsville, Alabama

There are 9 RepairPal Certified locations for Wheel Bearing Replacement, all with a minimum 12,000-mile/12-month warranty.

9 Results for Wheel Bearing Replacement near Huntsville, Alabama

Wheel Bearing Replacement can be completed at all of these locations, along with other repairs and services.

Shop Image

AAMCO Transmission & Total Car Care - Huntsville

4.7
(28)
1.35 mi
1007 Putnam Dr NW
Huntsville, AL
Closed
Opens 8:00 AM Mon
Call
Shop Image

JL Automotive

4.8
(8)
2.18 mi
2025 Virginia Boulevard Northwest
Huntsville, AL
Closed
Opens 8:00 AM Mon
Call
Shop Image

Express Oil Change & Tire Engineers - Sanderson Rd

4.5
(28)
5.47 mi
5700 Sanderson Rd NW
Huntsville, AL
Closed
Opens 8:00 AM Sat
Call
Shop Image

Meineke - Huntsville

3.9
(29)
5.7 mi
10035 Memorial Parkway Southwest
Huntsville, AL
Closed
Opens 7:30 AM Sat
Call
Shop Image

Christian Brothers Automotive - Hampton Cove

4.7
(348)
5.77 mi
6324 Hwy 431 South
Owens Cross Roads, AL
Closed
Opens 7:00 AM Mon
Call
Shop Image

Christian Brothers Automotive - South Huntsville

5
(10)
6.51 mi
11509 South Memorial Parkway
Huntsville, AL
Closed
Opens 7:30 AM Mon
Call
Shop Image

Precision Tune Auto Care - 056-05

4.6
(114)
25.67 mi
2334 6th Avenue SE
Decatur, AL
Closed
Opens 8:00 AM Sat
Call
Shop Image

All-Stars Auto Care Center

4.4
(19)
30.47 mi
4099 State Highway 20
Trinity, AL
Closed
Opens 8:00 AM Mon
Call
Shop Image

Community Auto Repair

4.6
(63)
41.38 mi
302 5th Avenue Southwest
Cullman, AL
Closed
Opens 7:00 AM Mon
Call

Wheel Bearing Replacement

How are wheel bearings replaced?

To replace a wheel bearing, a technician will need put the car on a lift, remove the wheel and tire, and remove the brake caliper and rotor. On some vehicles, the wheel hub and bearing are simply unbolted from the steering knuckle and can replaced as a unit. On other vehicles, though, the hub and bearing are pressed together into the knuckle and need to be removed with special tools. In these cases, a hydraulic press must be used to insert the new hub.
Wheel Bearing Replacement

Can I replace the wheel bearing myself?

Some vehicles with sealed front wheel bearings can be serviced at home. If the wheel hub and bearing are simply bolted to the knuckle and can be replaced as a unit, an intermediate DIYer with experience removing brake or suspension parts can do it. But many cars require that a technician remove hubs and bearings that are pressed into the knuckle. These components are difficult to disassemble, and reassembly requires a hydraulic press. In such cases, wheel bearing replacement is best left to a professional technician.

How are wheel bearings diagnosed?

To diagnose whether a wheel bearing is going bad, a technician will typically take the vehicle for a test drive to verify where the sound is coming from and determine which wheel bearing is the culprit. In the shop, the technician might lift the vehicle, rotate the wheel, and listen for sounds from the wheel hub. The technician will also test the wheel for excessive play by holding the tire on each side and rocking it back and forth. If there is play in the wheel and the steering and other suspension components are in good condition, the bearing has likely worn out.

What to look out for with wheel bearing issues

The front wheel bearing is an essential component of the vehicle suspension. As a wheel bearing wears out, more friction is created — and more damage occurs. On most vehicles, the wheel bearing requires special equipment to be serviced. If a bearing is installed improperly, it may fail early.

Wheel Bearing Replacement Cost Estimates