Fuel Evaporative Canister Replacement near Huntsville, Alabama

There are 9 RepairPal Certified locations for Fuel Evaporative Canister Replacement, all with a minimum 12,000-mile/12-month warranty.

9 Results for Fuel Evaporative Canister Replacement near Huntsville, Alabama

Fuel Evaporative Canister Replacement can be completed at all of these locations, along with other repairs and services.

Shop Image

AAMCO Transmission & Total Car Care - Huntsville

4.7
(28)
1.35 mi
1007 Putnam Dr NW
Huntsville, AL
Closed
Opens 8:00 AM Mon
Call
Shop Image

JL Automotive

4.8
(8)
2.18 mi
2025 Virginia Boulevard Northwest
Huntsville, AL
Closed
Opens 8:00 AM Mon
Call
Shop Image

Express Oil Change & Tire Engineers - Sanderson Rd

4.5
(28)
5.47 mi
5700 Sanderson Rd NW
Huntsville, AL
Open
Closes 6:00 PM
Call
Shop Image

Meineke - Huntsville

3.9
(29)
5.7 mi
10035 Memorial Parkway Southwest
Huntsville, AL
Open
Closes 6:00 PM
Call
Shop Image

Christian Brothers Automotive - Hampton Cove

4.7
(348)
5.77 mi
6324 Hwy 431 South
Owens Cross Roads, AL
Open
Closes 6:00 PM
Call
Shop Image

Christian Brothers Automotive - South Huntsville

5
(10)
6.51 mi
11509 South Memorial Parkway
Huntsville, AL
Open
Closes 6:00 PM
Call
Shop Image

Precision Tune Auto Care - 056-05

4.6
(114)
25.67 mi
2334 6th Avenue SE
Decatur, AL
Closed
Opens 8:00 AM Sat
Call
Shop Image

All-Stars Auto Care Center

4.4
(19)
30.47 mi
4099 State Highway 20
Trinity, AL
Closed
Opens 8:00 AM Mon
Call
Shop Image

Community Auto Repair

4.6
(63)
41.38 mi
302 5th Avenue Southwest
Cullman, AL
Closed
Opens 7:00 AM Mon
Call

Fuel Evaporative Canister Replacement

How are fuel evaporative canister issues diagnosed?

When the EVAP system is checked, the purge valve and vent valve are closed, and the pressure is monitored by the fuel pressure sensor. If that pressure drops with both valves closed, there is a leak in the EVAP system. If pressure holds properly, the system passes, and will continue to prevent vapor emissions. The sensor is also used in testing vent valve and purge valve operation. When the valves are open, the pressure sensor reads the fuel tank pressure, and must sense a drop in pressure. If not, the purge valve or vent valve may be faulty.
Fuel Evaporative Canister Replacement

How is a fuel evaporative canister replaced?

When the identified component is faulty, the technician will remove all electrical and vacuum connectors, clean the mating surface for the faulty part, and install a new part. The evap system will then be allowed to run self-diagnostics to test the repair. If additional leaks are present, or other components have failed, the test will fail, and the process will restart.

RepairPal Recommendations for fuel evaporative canister issues

To help prevent issues with the EVAP system, especially the charcoal canister, avoid overfilling or topping off the fuel tank. When the tank is topped off, the charcoal canister may fill with fuel, causing system failure, and degradation of the charcoal canister.

What to look out for when dealing with fuel evaporative canister issues

Many people like to remove EVAP components, but there is nothing to benefit from removal. The system is there to prevent harmful emissions, and increase fuel mileage in the process. When working with fuel, the battery should always be disconnected, and proper precautions taken against fire hazards.

Can I replace the fuel evaporative canister myself?

The EVAP system is best serviced by an experienced DIYer, or a professional technician. Repairing the EVAP system can be a struggle, but with proper understanding the job becomes enjoyable. The biggest mistake is to being changing parts based on hunches and misdiagnosis. That is where this job becomes more expensive than bringing the problem to a professional.

Fuel Evaporative Canister Replacement Cost Estimates