EGR Valve Replacement near Baton Rouge, Louisiana

There are 12 RepairPal Certified locations for EGR Valve Replacement, all with a minimum 12,000-mile/12-month warranty.

12 Results for EGR Valve Replacement near Baton Rouge, Louisiana

EGR Valve Replacement can be completed at all of these locations, along with other repairs and services.

Shop Image

Simpson's Auto Service

4.7
(77)
1.54 mi
505 N Alexander Ave
Port Allen, LA
Closed
Opens 7:30 AM Mon
Call
Shop Image

Vannak Automotive

4.4
(16)
2.46 mi
535 North Beck Street
Baton Rouge, LA
Closed
Opens 8:00 AM Mon
Call
Shop Image

K&H Automotive Service

4.6
(24)
3.31 mi
2358 College Drive
Baton Rouge, LA
Closed
Opens 8:00 AM Sat
Call
Shop Image

Precision Tune Auto Care #025-28

4.2
(317)
8.07 mi
2843 South Sherwood Forest Blvd.
Baton Rouge, LA
Closed
Opens 7:30 AM Sat
Call
Shop Image

Siegen Car Care

4.6
(31)
8.48 mi
6888 Siegen Ln
Baton Rouge, LA
Closed
Opens 7:30 AM Mon
Call
Shop Image

Express Oil Change & Tire Engineers - O'Neal

4.1
(38)
10.7 mi
2265 oneal lane
baton rouge, LA
Closed
Opens 8:00 AM Sat
Call
Shop Image

HIGH TECH CAR CARE

4.6
(29)
10.72 mi
2862 O'Neal Lane
Baton Rouge, LA
Closed
Opens 8:00 AM Sat
Call
Shop Image

Christian Brothers Automotive - Airline

4.7
(130)
11.45 mi
14455 Airline Highway
Baton Rouge, LA
Closed
Opens 7:00 AM Mon
Call
Shop Image

L&S Automotive

4.7
(194)
11.93 mi
16302 Jefferson Hwy
Baton Rouge, LA
Closed
Opens 8:00 AM Mon
Call
Shop Image

Express Oil Change & Tire Engineers - Prairieville Crossing

4.7
(32)
14.69 mi
17536 Airline Highway
Prairieville, LA
Closed
Opens 8:00 AM Sat
Call
Shop Image

Express Oil Change & Tire Engineers - Juban Crossing

4.4
(9)
16.14 mi
27925 Juban Road
Denham Springs, LA
Closed
Opens 8:00 AM Sat
Call
Shop Image

J1 Performance and Repair, LLC

4.9
(39)
36.19 mi
30175 North Montpelier Road
Albany, LA
Closed
Opens 8:00 AM Mon
Call

EGR Valve Replacement

How are EGR valve issues diagnosed?

An illuminated check engine light could lead to a fault code indicating a problem with the Exhaust gas recirculation (EGR) valve. In this case, the manufacturer suggested diagnostic procedures should be followed to isolate the cause. Removal of the valve may be required for a visual and functional inspections.
EGR Valve Replacement

How is a EGR valve replaced?

Once the valve is located and made accessible (on some models this can be very easy and on others it can be quite a challenge), relacement commonly involves unbolting the old valve and installing the new one. Rust can develop on the mounting nuts/bolts so penetrating oil should be used prior to attempting removal. Care should be taken around hot exhaust components. While the valve is off, it is a good time to check the be sure the EGR passages are clear.

RepairPal Recommendations for EGR valve issues

Always take care when working around hot exhaust system components and use penetrating oil before removing rusty nuts/bolts. EGR passages should be inspected while the valve is of to be sure they are clear of carbon buildup. When replacing the EGR valve, Vacuum hoses and or electrical connectors attached to it should be inspected and repaired or replaced as necessary.

What to look out for when dealing with EGR valve issues

Care should be taken when working around hot exhaust system components. EGR passages should be checked for carbon deposits whenever possible and cleaned as necessary during valve replacement. Rust can develop on mounting nuts/bolts, penetrating should be used prior to removal.

Can I replace the EGR valve myself?

The location of the EGR valve will most likely to determine if the is a DIY project or not. In some cases removal of additional components will be necessary to gain access to the valve, for testing as well as replacement. You will need to determine if you are up to the task or not. Certain models may also require special tools to remove nuts/bolts securing the valve.

EGR Valve Replacement Cost Estimates