Control Arm Replacement near Baton Rouge, Louisiana

There are 12 RepairPal Certified locations for Control Arm Replacement, all with a minimum 12,000-mile/12-month warranty.

12 Results for Control Arm Replacement near Baton Rouge, Louisiana

Control Arm Replacement can be completed at all of these locations, along with other repairs and services.

Shop Image

Simpson's Auto Service

4.7
(77)
1.54 mi
505 N Alexander Ave
Port Allen, LA
Closed
Opens 7:30 AM Mon
Call
Shop Image

Vannak Automotive

4.4
(16)
2.46 mi
535 North Beck Street
Baton Rouge, LA
Closed
Opens 8:00 AM Mon
Call
Shop Image

K&H Automotive Service

4.6
(24)
3.31 mi
2358 College Drive
Baton Rouge, LA
Closed
Opens 8:00 AM Sat
Call
Shop Image

Precision Tune Auto Care #025-28

4.2
(317)
8.07 mi
2843 South Sherwood Forest Blvd.
Baton Rouge, LA
Closed
Opens 7:30 AM Sat
Call
Shop Image

Siegen Car Care

4.6
(31)
8.48 mi
6888 Siegen Ln
Baton Rouge, LA
Closed
Opens 7:30 AM Mon
Call
Shop Image

Express Oil Change & Tire Engineers - O'Neal

4.1
(38)
10.7 mi
2265 oneal lane
baton rouge, LA
Closed
Opens 8:00 AM Sat
Call
Shop Image

HIGH TECH CAR CARE

4.6
(29)
10.72 mi
2862 O'Neal Lane
Baton Rouge, LA
Closed
Opens 8:00 AM Sat
Call
Shop Image

Christian Brothers Automotive - Airline

4.7
(130)
11.45 mi
14455 Airline Highway
Baton Rouge, LA
Closed
Opens 7:00 AM Mon
Call
Shop Image

L&S Automotive

4.7
(194)
11.93 mi
16302 Jefferson Hwy
Baton Rouge, LA
Closed
Opens 8:00 AM Mon
Call
Shop Image

Express Oil Change & Tire Engineers - Prairieville Crossing

4.7
(32)
14.69 mi
17536 Airline Highway
Prairieville, LA
Closed
Opens 8:00 AM Sat
Call
Shop Image

Express Oil Change & Tire Engineers - Juban Crossing

4.4
(9)
16.14 mi
27925 Juban Road
Denham Springs, LA
Closed
Opens 8:00 AM Sat
Call
Shop Image

J1 Performance and Repair, LLC

4.9
(39)
36.19 mi
30175 North Montpelier Road
Albany, LA
Closed
Opens 8:00 AM Mon
Call

Control Arm Replacement

How are control arm issues diagnosed?

A technician may diagnose a worn lower control arm during a test drive of the vehicle. The condition may also present itself during a bounce test, where the technician will press down firmly on one corner of the vehicle to bounce the suspension and pivot the control arms. A damaged or bent control arm may show up during a four wheel suspension alignment since the control arm determines the position and angle of the wheel.
Control Arm Replacement

How is a control arm replaced?

A technician will replace a lower control arm by first lifting and supporting the vehicle in the air on a hoist and removing the wheel and tire. A lower control arm must be disconnected from the lower ball joint (attached to the steering knuckle) and from the vehicle frame or body. An upper control arm is disconnected from the strut tower on the body and from the top of the steering knuckle. Some control arms come with bushings permanently installed in them, while others require the bushings to be installed. It is common to replace related components - ball joints, tie rod ends, sway bar links - at the same time that a control arm is replaced.

Can I replace the control arm myself?

Replacement of a control arm is generally an intermediate DIY repair. On some vehicles, the control arms come with the bushings already installed. On other vehicles, the bushings need to be pressed into their housings on the control arm before installation into the vehicle. In this case, the repair will be more difficult. Also, this repair requires that the vehicle be safely lifted and supported with a jack and jack stands. Failure to do so in a safe manner can result in serious injury or death.

Control Arm Replacement Cost Estimates