What is your question?
·
·
What is your question?
Dropped the evac canister under the tank and blew through it. Clear! When I add air into the outlet hose off the canister I get some air pressure coming back out. Some air does come out the vent at the filler neck but it isn't clear. there is a restriction of some sort but the vent line except for some small pieces of hose is steel. Put som airtank pressure to it but didn't help. Any other ideas besides dropping the tank and replacing everything. What seems to make the problem better or worse? Problem just started a week ago. Figured the stations evap hose was messed up.
1 Reply
Hello, There is likely a stuck check valve. You shouldn't have to remove the fuel tank, just the filler neck and vent assembly. You don't want to rod the vent hose or anything like that. If your model does not use a check valve, you will just be pressing debris into the fuel tank.
I saw a what looked like a plastic "Y" at the top of the fuel tank where the hoses from the tank run across the top of the tank and to somewhere through the frame towards the engine. Have been trying to get the dang special little clamps off the hoses without ruining them but I've decided I'll just cut the and use regular clamps on new hose. Some of the small hoses are very soft. I'm guessing that check valve your referring to is that plastic piece? Thanks