can i eliminate the air ride system from the message center

I wish it were that simple as cutting a wire. You have to convince a pretty hefty computer inside of your dash.

if you leave your height sensors hooked up, all you have to do is remove the passenger side kick panel (by the feet) there is a little box inside with 3 plugs. disconnect the black plug(which is for the air compressor, level sensors, etc. system check everytime shows air ride suspension ok as long as your height sensors are still in tact.

Yes you can the guys at strutt master have when you order there kit they tell and show you how to on the 1993 mark viii right side kick panel upper right you will find a couple of connectors in a comp box the back one has only one dark green wire with light green strip only {only one} you cut it tape it turn your air ride back on light gone

Thats simple. All you have to do is remove the Air Suspension Control Module located on the passenger side of the vehicle right behind the kick panel. unplug it and you will be good to go. Your height sensors, leveling sensors, etc are actually located on or near the air bags. if you have already converted it to coil springs then chances are you have already removed these components. Just remove the suspension control module now.

there is no conversion kit that compairs to air ride. that said think twice before converting. the mark8 is a great car and some parts are a little steep but worth mantaining stock. resale may be affected if your convert. two friends of mine regreted their conversion. finally i repaired or should i say completely replaced my intire system for under $800.00 at 88,000 miles. not bad for a 18 year old car. i wont be alive the next time they need to be replaced. lastly i love my 93 mark 8 and it loves me. take care.