p1495 error code

you need a shop with a smoke machine, scan tool to determine the failure. a code number never identifies a bad part, just a failed system. Roy

MIL on and trouble code P1495 is stored. Tests/Procedures: 1. Check for B+ on the White/Dark Green wire at cavity 10 in the gray Powertrain Control Module (PCM) connector. 2. If not B+, check at the Leak Detection Pump (LDP) on the center wire with the LDP connected. 3. If voltage is present at the LDP but not at cavity 10 at the PCM, the wire is open. This code is an electrical problem related to the LDP.