What is your question?
·
·
What is your question?
Turn signals and hazard lights stopped working how do I fix that? Is it a fuse or something else?
How long has your 2003 Dodge Intrepid had this problem?
4 months
2 Replies
Check to see if Fuse 9 in the Junction Block(side of dash fush box) and Fuse O in the PDC are not blown.The molded plastic PDC housing is located in the left front corner of the engine compartment, just in front of the coolant reservoir bottle. You will need a flashlight or droplight and a very thin blade screwdriver. You will have to get down and look up next to the firewall above the brake pedal, so remove the driver side knee bolster. You should see an orange box, a yellow box, and a black box. The flasher is the black one. It is held on a white plastic bracket in a slot. Remove the 10MM bolt, and turn the bracket, until you will see an opening between the flasher and the bracket. Use the screwdriver and gently lift the retaining peg in there, the flasher will slide off. If they are okay then it's your Turn Signal/ Hazard Flasher. Alex
This can also be the combination switch but that will require further electrical testing. Alex