What is your question?
·
·
What is your question?
On the dash, just below and to the left of Exterior Lamp Control, is a button called the Dome Lamp Override which is loose. When I pushed it today, suddenly my Head Lamps and Tail Lights are no nonger working. The Brake Lights and Turn Signals still work, however. Any advice?
1 Reply
Sounds like you shorted something out when the switch broke. Fisrt remove the two 10 mm bolts on the dash panel at the bottom of the drivers side. pull the lower assembly out. There are four tabs that hold the switch assembly in, two on the right and two on the left. Squezze them together to remove the switch assembly. Replace the switch assembly with a new one. Push the assembly in the opening and push the tabs out to make sure it is locked in place. If you still have a problem start checking fuses in the fuse box under the drivers seat. Also check your TBC fuses in the under the hood fuse box.