P2008 and P2015 Audi Check Engine Codes

Hi. Yes you are right, it is for the intake manifold runner. Both codes mean the same thing. The diagnostic for this problem is not complicated but you would need a special adapter. The only advise I could give you at this point would be to check all the wirings at the side of the throttle body. Make sure no wires are grounding. Visualy inspect the connection on the the sensor itself, it should be located right next to the throttle body. Most likely the sensor or the manifold runner motor is bad. If you cannot figure it out by yourself take it to someone who specializes in Audis the diagnostic price varies but it could range from $50-75 and also it could be free of charge if you fix the car with them. http://www.transartnc.com

iv got a 3.0L V6 (Cabriolet) that code came up on my mine it ended up being the turbo that i needed it replacing.So make sure your not losing power or smoke coming from the back.if this sounds what you expericening then it could be the turbo.So just get it down to Audi hope this help