What is your question?
·
·
What is your question?
So I have 2001 Acura CL 3.2 2 weeks ago was changed all ignition coils - bc was missfire Yesterday I changed starter - bc car doesn't start, when I turn the key starter made some noise even if I remove key from the ignition. So I changed it. After starter change car still not starting. I turn the key and my dashboard full of lights, and fuel pump suck non-stop (can hear it well) until I remove the key from ignition. No clicks, no other sound. Radio, light still works. Battery also good. Any tips what a hell with my car?
How long has your 2001 Acura CL had this problem?
2 days
·
May 12, 2018
·
1 Reply
I believe you mean the engine is not cranking? starter motor is not cranking the engine over? if that's correct,you have a no crank-no start condition.are the battery terminals clean,free of corrosion,tight? have you tried jump starting it? do you have power/signal on the small wire going to the starter solenoid while helper turns the key to the cranking position,checking with a volt meter?
when I turn the key nothing happen at all, no any sound, just fuel pump. No crunk no start