P2446 OBD-II: Secondary Air Injection System Pump Stuck On

P2446 Severity

Moderate

Will P2446 go away on its own?

Once the vehicle's onboard system no longer detects the issue, most codes will disappear on their own. If your vehicle still has this code, however, it should be properly diagnosed to avoid a more serious problem.

For a proper diagnosis, RepairPal Certified shops have the equipment, tools, and expertise.

Moderate severity codes might not threaten the vehicle's safety or functionality immediately, but you should still get it diagnosed within a reasonable time frame to keep your car running well.

Schedule Diagnosis

What causes OBD-II fault code P2446?

The Secondary Air Injection System pumps outside fresh air into the Exhaust System during cold engine start up. This additional air helps burn up the highly rich exhaust emissions that are produced when the engine is warming up. The Secondary Air Pump is controlled by the engine computer. If the pump does not operate as requested, code P2446 will be set.

Need a P2446 diagnosis? Trust our experts.

RepairPal Certified shops provide expert diagnostics and repairs with transparent upfront pricing and a minimum 12-month or 12,000-mile warranty on all services.
30 Certified Locations
Shop Image

Tuffy Tire & Auto Service Center - Grandview

4.7
(84)
2.39 mi
1524 W 5th Ave
Columbus, OH
Open
Closes 5:00 PM
Call
Shop Image

Excite Auto Repair & Towing

4.4
(15)
5.94 mi
3430 Westerville Road
Columbus, OH
Open
Closes 6:00 PM
Call
Shop Image

All In Auto Service

4.9
(23)
6.56 mi
5200 Fisher Road
Columbus, OH
Open
Closes 6:00 PM
Call
Shop Image

Tuffy Tire & Auto Service - Grove City

4.4
(520)
6.67 mi
2131 Stringtown Rd
Grove City, OH
Open
Closes 6:00 PM
Call
See All 30 Locations

OBD II Fault Code

  • OBD II P2446

OBD-II Code Powertrain Control Module (PCM) failure is defined as a Secondary Air Injection System Pump Stuck On

The Secondary Air Injection System pumps outside fresh air into the Exhaust System during cold engine start up. This additional air helps burn up the highly rich exhaust emissions that are produced when the engine is warming up. The Secondary Air Pump is controlled by the engine computer. If the pump does not operate as requested, code P2446 will be set.

Common Problems That Trigger the P2446 Code

  • Clogged or disconnected vacuum hose
  • Powertrain Control Module (PCM) failure
  • Secondary air pump control valve failure
  • Secondary air pump failure
  • Wiring issue
RepairPal Car Genius

Ask our experts about P2446.

RepairPal Car Genius™ is a free resource for vehicle owners seeking advice on maintenance, auto repair, shop inquiries, estimates, and finding a trustworthy repair shop in your area.

 Auto Repair Expert Auto Repair Expert

Call us at 877-913-1554

Available 9am – 6pm ET Monday through Friday

Call Our Experts

Other OBD-II Codes

P2445: Secondary Air Injection System Pump Stuck OffP2444: Secondary Air Injection System Pump Stuck OnP2443: Secondary Air Injection System Switching Valve Stuck ClosedP2442: Secondary Air Injection System Switching Valve Stuck OpenP2441: Secondary Air Injection System Switching Valve Stuck ClosedP2440: Secondary Air Injection System Switching Valve Stuck OpenP2439: Secondary Air Injection System Air Flow/Pressure Sensor CircuitP2438: Secondary Air Injection System Air Flow/Pressure Sensor CircuitP2437: Secondary Air Injection System Air Flow/Pressure Sensor CircuitP2436: Secondary Air Injection System Air Flow/Pressure Sensor CircuitP2435: Secondary Air Injection System Air Flow/Pressure Sensor CircuitP2434: Secondary Air Injection System Air Flow/Pressure Sensor CircuitP2447: Secondary Air Injection System Pump Stuck OffP2448: Secondary Air Injection System High Air FlowP2449: Secondary Air Injection System High Air FlowP244A: Diesel Particulate Filter Differential Pressure Too LowP244B: Diesel Particulate Filter Differential Pressure Too HighP244C: Exhaust Temperature Too Low For Particulate Filter RegenerationP244D: Exhaust Temperature Too High For Particulate Filter RegenerationP244E: Exhaust Temperature Too Low For Particulate Filter RegenerationP244F: Exhaust Temperature Too High For Particulate Filter RegenerationP2450: Evaporative Emission System Switching Valve Performance/StuckP2451: Evaporative Emission System Switching Valve Stuck ClosedP2452: Diesel Particulate Filter Pressure Sensor "A" Circuit