2018 Nissan Versa Tire Pressure Warning Light Stays On

Resolve Tire Pressure Warning Light in 2018 Nissan Versa: Causes and Solutions

Find Repair Location
Reviewed by
Aisha
Written by RepairPal Car Genius
Updated January 14, 2025
0%
40% chance it's the
Tire Leaking Air
0%
30% chance it's the
Wheel Leaking Air
0%
15% chance it's the
Tire Pressure Monitoring System
0%
15% chance it's
Something else
The most common reasons a 2018 Nissan Versa tire pressure warning light stays on are a leaking tire, a wheel that no longer holds air, or a faulty tire pressure monitoring system.
  • Tire Leaking Air: A puncture, valve stem issue, or rim damage can cause a tire to leak air, leading to loss of pressure.
  • Wheel Leaking Air: A puncture or damage to the tire or rim can cause air to leak, resulting in a loss of tire pressure.
  • Tire Pressure Monitoring System: A malfunctioning tire pressure monitoring system can be caused by faulty sensors or a dead battery in the sensor units.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

How much does it cost to fix a 2018 Nissan Versa tire pressure warning light stays on?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

When a tire pressure monitoring sensor fails, the tire pressure monitoring system control module will recognize a loss in communication and turn on the warning lamp which indicates the failure. This is most often the case. However, the tire pressure monitoring sensor may also fail by reporting incorrect tire pressures. This could cause a flat tire to go unrecognized, or a properly inflated tire to signal a low or high tire pressure warning.

When a relearn is needed, for any reason, the TPMS warning light will illuminate, and many vehicles will display a message relating to the TPMS system being inoperative or loosing communication. It is important to keep a watchful eye on tire pressures when this system is having issues because there is no warning available for underinflation or overinflation of the tires.

Wheels offer very few symptoms, but these symptoms should never be ignored. Visible cracks on the wheels may appear, especially after hitting a large bump, Most often, this will also be accompanied by loss of air from the tire on that wheel. Also, vibration in the steering wheel is very common when the tire is out of balance, and improper wheel nuts or bolts can cause creaking and popping noises to develop. Again, there are very few symptoms, but they should not be ignored.

The only symptoms requiring diagnosis for the tire pressure monitoring system warning lamp is if the warning lamp has illuminated while the tires have correct air pressure, or if the air pressure for the tires is out of specification and the warning lamp is off. This is because the overwhelming majority of cases where the TPMS lamp illuminates is due to the change in ambient temperature.

What steps should I take to diagnose the tire pressure warning light issue on my 2018 Nissan Versa?

When diagnosing the tire pressure warning light issue on your 2018 Nissan Versa, it's essential to adopt a systematic approach that prioritizes simpler solutions before delving into more complex diagnostics. Begin by checking the tire pressure in all four tires with a reliable tire pressure gauge, ensuring that the readings align with the recommended PSI found in your owner's manual or on the driver's side door jamb. Next, conduct a thorough visual inspection of each tire for any signs of damage, such as punctures or uneven wear, which could indicate alignment problems. If the tire pressure is correct and no visible issues are detected, proceed to reset the tire pressure monitoring system, typically accessible through your vehicle's settings menu. Should the warning light remain illuminated, it may signal a malfunction in one of the tire pressure sensors, necessitating a diagnostic tool to pinpoint the faulty sensor. If these steps do not resolve the issue, consulting a mechanic or visiting a Nissan dealership for professional assistance is advisable to ensure your vehicle's safety and performance.

What could cause the tire pressure warning light to stay on in a 2018 Nissan Versa?

When the tire pressure warning light stays on in a 2018 Nissan Versa, it can signal several underlying issues that DIYers can investigate. The most common reason is low tire pressure, which can easily be checked and corrected by inflating the tires to the recommended levels. If the pressure is adequate, the next step is to examine the tire pressure sensor, as a malfunctioning sensor may fail to provide accurate readings. Additionally, the tire pressure monitoring system itself could be experiencing issues, requiring a reset or recalibration to function correctly. Seasonal changes in temperature can also affect tire pressure, so it's important to keep an eye on your tires during extreme weather. Inspecting for leaks or punctures is crucial, as these can lead to gradual air loss and trigger the warning light. Lastly, consider potential electrical issues within the vehicle that might be causing the light to remain illuminated. By addressing these common problems, you can ensure your vehicle remains safe and performs optimally; however, if the warning light persists after your checks, consulting a professional mechanic is advisable.

What should I do if the tire pressure warning light on my 2018 Nissan Versa stays on?

When the tire pressure warning light on your 2018 Nissan Versa remains illuminated, it is crucial to act promptly to avoid potential safety hazards and costly repairs. Ignoring this warning can lead to decreased vehicle handling, increased tire wear, and even tire blowouts, which pose serious risks on the road. Start by checking the tire pressure in all tires, including the spare, using a reliable tire pressure gauge. Ensure that each tire is inflated to the manufacturer's recommended levels, typically found in the owner's manual or on a sticker inside the driver's side door. If you discover any underinflated tires, inflate them immediately using an air compressor or a gas station air pump. After adjusting the pressure, you may need to reset the tire pressure monitoring system, which can usually be done through your vehicle's dashboard controls. Additionally, inspect your tires for any visible damage, such as punctures or cuts, as these can lead to air loss. If the warning light persists despite these efforts, it may indicate a malfunction in the tire pressure monitoring system, necessitating a visit to a mechanic for further inspection. By taking these steps, you not only ensure your safety but also prolong the life of your tires and enhance your vehicle's performance.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.