My car wont crank or start.

What is your question?

I ran a remote wire to a relay in the fusebox(RUN/CRNK) for my subwoofers and everything worked fine and sounded good. I turned truck off and went to sleep but when i tried to go to work in the am Everything in my car was working perfect before i installed the remote wire No starter click No crank No start The relay i hooked up too is not blown I have checked every single fuse and relay in the box and nothing is blown and everything electrical seems to work just fine All my electronics come on when i turn the key I disconnected the remote wire and the power wire from my sound system so that its not interfering with anything anymore My battery is not dead Throwing code P1862 DRIVER 5 LINE 2 The (ENG) fuse is pulling 11.63 steady The (ECM-IGN) fuse is pulling 11.63 steady 2008 yukon xl 5.3/4l60/4wd

How long has your 2008 GMC Yukon XL 1500 had this problem?

Today

Visitor

in Warren MI

Aug 24, 2024

1 Reply

Popular Answer

DaveJMon Aug 25, 2024

Hello, well clearly - the modification made caused a problem. You will need to determine if the problem is related to the modification itself, or. if it is instead due to unintended damage caused by the modification. You are talking about a P1682 code, by the way. I suspect a blown fuse or relay related to the ignition or ECM. A power surge is something I would expect due to the work you performed which could overload a protected circuit. It will take some time and effort, but try - you can find the circuit that is not powered as needed. If you need help, https://repairpal.com/auto-repair-near-me Click the link or call us at 877-913-1554. We'll gladly find you a certified RepairPal shop in your area.

Join the conversation!

What are the best GMC repair shops?

RepairPal Certified shops can diagnose and repair your 2008 GMC Yukon XL 1500. They provide transparent pricing with a minimum 12-month or 12,000-mile warranty on repairs and services.