Mitsubishi Sigma Window Won't Go Up Or Down

Common Causes of Window Malfunctions in Your Mitsubishi Sigma and How to Fix Them

Find Repair Location
Reviewed by
Bo Fader
Written by RepairPal Car Genius
Updated January 14, 2025
0%
36% chance it's the
Fuse, Relay or Electrical System
0%
20% chance it's the
Window Motor
0%
24% chance it's the
Window Regulator
0%
20% chance it's
Something else
The most common reasons a Mitsubishi Sigma window won't go up or down are window's electrical system such as a fuse or relay, a broken window motor, or a broken window regulator.
  • Fuse, Relay or Electrical System: A blown fuse or a faulty relay can disrupt the electrical circuit, causing components to fail or operate intermittently.
  • Window Motor: A faulty window motor or a broken window regulator can prevent the window from moving up or down properly.
  • Window Regulator: A faulty window regulator can cause the window to become stuck or operate erratically due to worn gears or a broken cable.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

How much does it cost to fix a Mitsubishi Sigma window won't go up or down?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

If the door window motor fails, the window may not open or close, or it may operate intermittently. Traditionally, problems with power windows were caused by faulty switches or electrical wiring - especially the wires running between the door and the vehicle body that are subjected to repeated flexing. In these cases, the window might operate intermittently when the door is opened and closed. While this may still be the case on newer cars, it is increasingly common to find window motor problems that originate with a control module. Still, the switches and wiring should be checked thoroughly before replacing a window motor.

When a switch can not make contact and close the circuit, the window cannot be raised and lowered. If the switch on the driver's door will not raise or lower the window in question, but the switch on the corresponding door works just fine, this is a good indication that there is a switch failure. This works the other way around, as well. If the switch on the door does not cause the window to function, but the driver's switch does, that is an indication of a passenger door window switch failure.

Due to the nature of electrical systems on modern vehicles, the range of problems these can cause are nearly limitless. However, there is a way to categorize them in two ways. Permanent and intermittent problems. Permanent problems appear and remain. This may be the vehicle will not start, the radio does not work, or the door chime will not turn off among many, many others. These problems are more straight-forward to diagnose since they present themselves at all time. This means there will always be a fault to find. Intermittent electrical problems, however, can be difficult or impossible to locate, since they appear then disappear without warning. The best case scenario for an intermittent issue is when replicating the problem is easily accomplished and understood. This allows a technician to make an issue semi-permanent, allowing them to find the fault. Other issues that come and go without warning and cannot be replicated on demand must occur when the technician is servicing the vehicle, otherwise there is no problem to correct. It is most important to understand that electrical system faults always require inspection, and can include the vehicle working in any manner, or not working at all.

Like we noted in the last section, general diagnosis symptoms are the most vague of the bunch. There are several diagnostic spectrums, electrical diagnosis, drivability diagnostics, engine diagnostics, transmission diagnostics, and the list could continue for about 5 or 10 more spectrums of diagnostics. The most important take-away here, is that general diagnostics are diagnostics that have no other spectrum in which they fit, or the problem is unknown. This means that any vehicle left outside of a repair facility with the keys and an authorization to perform diagnosis will be diagnosed under the general diagnosis spectrum.

Troubleshooting Window Issues in a Mitsubishi Sigma

When troubleshooting window issues in your Mitsubishi Sigma, it's essential to adopt a systematic diagnostic approach. Begin by checking the simplest components, such as the fuses, which can often be the culprit behind a non-functioning window. Inspect both the under-hood and dashboard fuse boxes for any blown fuses that may interrupt power to the window system. If the fuses are intact, move on to the window switch itself; a worn or faulty switch can prevent the window from operating correctly. Testing the switch can be done by bypassing it temporarily to see if the window responds. If the window still does not move, the next step is to examine the window motor and regulator, as these components can wear out over time. Listen for any unusual noises when operating the window, as rattling or grinding sounds may indicate mechanical issues that require attention. Lastly, if the window appears misaligned, gently adjusting it back into its track can resolve alignment problems. By following this methodical approach, you can effectively diagnose and address window issues in your Mitsubishi Sigma, ensuring a smoother and more efficient repair process.

What to Check When Your Mitsubishi Sigma Window Won't Go Up or Down?

When faced with a Mitsubishi Sigma window that won't go up or down, it's essential to understand the common problems that could be at play. Start by examining the electrical system, as a blown fuse or faulty relay can disrupt the window's operation. If the electrical components seem intact, the next step is to assess the window motor. A simple test involves tapping the door panel; if the window responds, it may indicate a failing motor or wiring issue. Additionally, inspect the window regulator, as a malfunction here can prevent the window from moving even if the motor is functional. Pay attention to the driver side window, especially during inspections, as issues like unusual noises or windows dropping can signal deeper problems. Lastly, ensure that all electrical connections within the door are secure and that the fuses are intact, with proper voltage reaching the switch. By methodically checking these areas, you can effectively troubleshoot and resolve the window issue, empowering you to take control of your vehicle's maintenance.

Why is it Urgent to Fix a Stuck Window in a Mitsubishi Sigma?

Addressing a stuck window in your Mitsubishi Sigma is not just a matter of convenience; it is an urgent issue that requires immediate attention. A malfunctioning window can leave your vehicle vulnerable to theft, as it cannot be securely closed, compromising your safety and the security of your belongings. Additionally, an open window exposes the interior to harsh weather conditions, which can lead to significant damage to the upholstery and electronic components. This not only affects the aesthetic appeal of your car but can also result in costly repairs down the line. Furthermore, a stuck window can hinder comfort for both the driver and passengers, especially during extreme temperatures, making every journey less enjoyable. Most critically, in emergency situations, a stuck window could impede a quick escape, posing a serious safety hazard. Therefore, it is essential to address this issue promptly to maintain the integrity of your vehicle and ensure the safety and comfort of everyone inside.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.