The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.
When the throttle position sensor fails, the engine's computer tends to overcompensate with fuel, leading black exhaust coming from the tailpipe. There is a strong possibility of engine misfires, and the check engine light will come on.
Throttle position sensors can also develop "dead spots," or certain places along the throttle curve where it doesn't get a reading. When this happens, the above symptoms can occur but then stop when you further press or let off the gas pedal.
In the event that a wheel speed sensor fails, the ABS, traction control system (TCS) and manufacturer specific stability control system lights will illuminate, informing the driver that the systems are disabled. The vehicle will be more prone to tire slip, and normal driving patterns may need to be adjusted to correct for the loss of computer control. On older vehicle's, the speedometer can be affected, causing illumination of the check engine light as well.
If the cruise control refuses to turn on at all, the actuator could be at fault. Likewise, if the cruise control stays on but does not maintain a consistent speed, the problem could be a bad actuator. In extreme cases, a malfunctioning actuator could cause the throttle to stick and prevent the vehicle from slowing down. These symptoms may point to a bad actuator. They may also point to other problems with the cruise control and related systems.
When troubleshooting cruise control issues in a Mitsubishi Sigma, it's crucial to follow a methodical diagnostic approach that prioritizes simpler fixes before delving into more complex problems. Begin by checking the cruise control fuse, as a blown fuse is a common and straightforward issue to resolve. Next, inspect the brake pedal switch, which can often fail and disrupt the cruise control's functionality. If these components are in good working order, turn your attention to the throttle control system, as any irregularities here can significantly impact cruise control performance. Additionally, assess the Anti-lock Braking System (ABS) for faults, as these can also contribute to cruise control malfunctions. For older models, a broken vacuum line may be the source of the problem, so be sure to check this as well. If the cruise control switch is faulty, it will require replacement. It's also important to consider any modifications, such as the installation of LED lights in the brake system, which can interfere with the cruise control circuit. Finally, if the check engine light is on or if there are other engine-related issues, these should be addressed promptly, as they can prevent the cruise control from operating correctly. By systematically addressing these potential issues, you can effectively diagnose and resolve cruise control problems in your Mitsubishi Sigma.
When diagnosing cruise control malfunctions in a Mitsubishi Sigma, it's crucial to consider several common problems that could be affecting the system. One of the first things to check is the fuses, as a blown fuse can interrupt the power supply to the cruise control, rendering it inoperable. Additionally, the brake pedal position sensor plays a vital role in the functionality of cruise control; if this sensor is faulty, it may prevent the system from engaging. Throttle body issues can also disrupt the cruise control's operation, as can problems with the PRNDL or shifter position switch. Furthermore, defective switches and sensors, including those that trigger the "check engine" light, can indicate underlying issues that need attention. In older models, a broken vacuum line may be the culprit, as these systems often rely on vacuum pressure to function correctly. By systematically checking these components, DIYers can effectively troubleshoot and resolve cruise control issues in their Mitsubishi Sigma.
When your Mitsubishi Sigma's cruise control malfunctions, it’s crucial to address the issue without delay. Ignoring symptoms such as erratic speed control or the system failing to engage can not only compromise your driving experience but also pose significant safety risks. For instance, a faulty brake pedal switch or a blown fuse can lead to unexpected acceleration or deceleration, which could result in dangerous driving conditions. Additionally, if the throttle position sensor is malfunctioning, it may cause the engine to run inefficiently, leading to increased fuel consumption and potential engine damage over time. Furthermore, older systems that rely on vacuum lines can develop leaks, which may not only affect cruise control functionality but also impact overall engine performance. Therefore, it is essential to conduct a thorough inspection of the cruise control components, including the control module, sensors, and wiring, to ensure safe and reliable operation of your vehicle. Taking prompt action can prevent minor issues from escalating into costly repairs and enhance your driving safety.
Read about related problems experienced by other Mitsubishi Sigma drivers like you.
See what others are asking about their Mitsubishi Sigma. Get answers from RepairPal's community of auto experts and enthusiasts.