2006 Mitsubishi Raider Tire Pressure Warning Light Stays On

Resolve Tire Pressure Warning Light in 2006 Mitsubishi Raider: Causes and Solutions

Find Repair Location
Reviewed by
Andrew Hajjar
Written by RepairPal Car Genius
Updated January 14, 2025
0%
40% chance it's the
Tire Leaking Air
0%
30% chance it's the
Wheel Leaking Air
0%
15% chance it's the
Tire Pressure Monitoring System
0%
15% chance it's
Something else
The most common reasons a 2006 Mitsubishi Raider tire pressure warning light stays on are a leaking tire, a wheel that no longer holds air, or a faulty tire pressure monitoring system.
  • Tire Leaking Air: A puncture, valve stem issue, or rim damage can cause a tire to leak air, leading to loss of pressure.
  • Wheel Leaking Air: A puncture or damage to the tire or rim can cause air to leak, resulting in a loss of tire pressure.
  • Tire Pressure Monitoring System: A malfunctioning tire pressure monitoring system can be caused by faulty sensors or a dead battery in the sensor units.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

How much does it cost to fix a 2006 Mitsubishi Raider tire pressure warning light stays on?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

Wheels offer very few symptoms, but these symptoms should never be ignored. Visible cracks on the wheels may appear, especially after hitting a large bump, Most often, this will also be accompanied by loss of air from the tire on that wheel. Also, vibration in the steering wheel is very common when the tire is out of balance, and improper wheel nuts or bolts can cause creaking and popping noises to develop. Again, there are very few symptoms, but they should not be ignored.

The only symptoms requiring diagnosis for the tire pressure monitoring system warning lamp is if the warning lamp has illuminated while the tires have correct air pressure, or if the air pressure for the tires is out of specification and the warning lamp is off. This is because the overwhelming majority of cases where the TPMS lamp illuminates is due to the change in ambient temperature.

What steps should I take to diagnose the tire pressure warning light issue on my 2006 Mitsubishi Raider?

To effectively diagnose the tire pressure warning light issue on your 2006 Mitsubishi Raider, begin with a thorough assessment of the tire pressure in all four tires. Utilize a reliable tire pressure gauge to ensure that each tire is inflated to the recommended PSI, which can be found in your owner's manual or on the sticker located inside the driver's side door jamb. Next, conduct a visual inspection of each tire for any signs of damage, such as punctures, cuts, or bulges that could lead to air loss. It's also essential to check for leaks; you can do this by examining the tires and valve stems closely, and applying a soap and water solution to identify any escaping air, indicated by the formation of bubbles. Don’t overlook the spare tire, as it can also trigger the warning light if its pressure is low. If all tires are in good condition and properly inflated, the final step is to reset the tire pressure monitoring system (TPMS) according to the instructions in your owner's manual. By following this diagnostic approach, you can systematically address the tire pressure warning light issue and ensure your vehicle is safe to drive.

What could cause the tire pressure warning light to remain on in a 2006 Mitsubishi Raider?

When the tire pressure warning light remains on in a 2006 Mitsubishi Raider, it can signal several underlying issues that are manageable for DIY enthusiasts. The most common reason is low tire pressure, so the first step is to check and inflate your tires to the recommended levels. If the pressure is adequate, the next possibility is a faulty tire pressure sensor, which may need replacement. Additionally, the sensors could require recalibration to ensure they are functioning correctly. It's also important to inspect the electrical connections within the tire pressure monitoring system, as wiring issues can lead to persistent warning lights. Finally, a system reset, as outlined in the vehicle's manual, can sometimes resolve the issue. By methodically addressing these potential problems, you can troubleshoot and potentially fix the tire pressure warning light in your Mitsubishi Raider, ensuring safer driving conditions.

What should I do if the tire pressure warning light stays on in my 2006 Mitsubishi Raider?

When the tire pressure warning light remains illuminated in your 2006 Mitsubishi Raider, it is crucial to address the issue without delay. Ignoring this warning can lead to unsafe driving conditions, including reduced traction and increased tire wear, which may ultimately result in a blowout or loss of control while driving. Start by checking the tire pressure in all tires, including the spare, using a reliable gauge to ensure they meet the manufacturer's recommended levels. If you find any tires underinflated, inflate them immediately to avoid further complications. Additionally, inspect each tire for visible damage such as punctures or bulges, as these can compromise safety and performance. After making necessary adjustments, you may need to reset the tire pressure monitoring system, a process typically detailed in your vehicle's manual. If the warning light persists despite your efforts, it is essential to consult a professional mechanic to diagnose any underlying issues with the monitoring system. Taking these steps not only enhances your safety on the road but also helps prevent costly repairs down the line.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.