2019 Mercedes-Benz GLE43 AMG Engine Makes A Ticking Noise

Ticking Noises in 2019 Mercedes-Benz GLE43 AMG Engine: Causes and Solutions

Find Repair Location
Reviewed by
Aisha
Written by RepairPal Car Genius
Updated January 14, 2025
0%
12% chance it's the
Exhaust Leak
0%
88% chance it's
Something else
The most common reasons a 2019 Mercedes-Benz GLE43 AMG engine makes a ticking noise are low oil level or pressure, an issue with the ignition system, or an exhaust leak.
  • Exhaust Leak: A damaged exhaust manifold or a loose connection in the exhaust system can cause an exhaust leak, resulting in increased noise and potential loss of engine power.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

How much does it cost to fix a 2019 Mercedes-Benz GLE43 AMG engine makes a ticking noise?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

If the drive belt idler pulley fails, there will be a very audible chirping noise from the front of the engine. This is because the idler pulley bearing is no longer smooth, and rotating causes metal to grind at high speeds. If it is not changed immediately, there is a chance it will become dislodged, or allow the drive belt to slip off. If the belt falls off, the accessory that it drives will no longer function. For instance, if the alternator belt idler pulley fails, the alternator may stop functioning. Also if the pulley begins to wobble, allowing slack in the belt, it will make an extremely loud squeaking or screeching noise, especially on cold starts. This is the belt slipping on the crankshaft pulley, and will require belt replacement once the idler pulley is replaced.

If the drive belt tensioner fails, there will be a very audible chirping, grinding, or rattling noise from the front of the engine. This is because the tensioner pulley bearing is no longer smooth, and rotating causes metal to grind at high speeds. If it is not changed immediately, there is a chance it will become dislodged, or allow the drive belt to lose tension, or break. If the belt falls off, the accessory that it drives will no longer function. Also, if the tensioner spring fails, allowing slack in the belt, it may make an extremely loud squeaking or screeching noise combined with a rattle as the tensioner bounces back and forth under load. The squealing noise is the belt slipping on the crankshaft pulley, and will require belt replacement once the belt tensioner is replaced.

An engine leaking oil does not always make a puddle on the ground. A burning smell may be noticed from the front of the vehicle after driving. This is because engine oil leaks may fall onto hot engine components, especially the exhaust manifold, and burn off before making it to the ground. This poses a risk to the engine because the leak going unnoticed may deplete the engine oil reserve, and lead to an oil starvation issue. Some engine oil leaks only occur while the engine is running, so the leak may be larger than the small spot on the ground makes it seem.

Noises can be accompanied by many annoying or worrisome sensations. Consider the noise of grinding brakes, the noise sounds much like the brake pedal and steering wheel feel. This is important, as random noises can be difficult to replicate without knowing when the sound occurs, what must be done to make the sound, and what sound it is. Any professional technician can replicate and diagnose most noises, but to ensure the vehicle is more quickly diagnosed, make sure you tell your technician these three pieces of information.

The engine oil pressure warning light will come on if the engine oil pressure is low, or if the oil pressure sensor is faulty. In either case, engine power may be reduced significantly. The check engine light may also illuminate, and an on-board diagnostic (OBD) trouble code will be stored in the vehicle's computer.

What are the potential causes of a ticking noise in the engine of a 2019 Mercedes-Benz GLE43 AMG, and how should I diagnose them?

To effectively diagnose a ticking noise in the engine of your 2019 Mercedes-Benz GLE43 AMG, start with the simplest and most accessible checks. Begin by inspecting the engine oil level; low oil can lead to inadequate lubrication, resulting in ticking sounds. If the oil level is fine, turn your attention to the valve train components, as worn lifters or camshaft parts can also produce similar noises. Next, examine the timing chain for any signs of looseness or wear, as a malfunctioning timing chain can contribute to ticking. Additionally, check for exhaust leaks, particularly near the engine, as these can create unwanted sounds. Don’t overlook the spark plugs; worn or faulty plugs may also be the source of the ticking. If these initial checks do not reveal the problem, it may be time to consult a professional mechanic who can utilize specialized diagnostic tools to identify more complex issues. By following this structured approach, you can systematically eliminate potential causes and work towards resolving the ticking noise in your engine.

What could be causing the ticking noise in the engine of a 2019 Mercedes-Benz GLE43 AMG?

If you're hearing a ticking noise from the engine of your 2019 Mercedes-Benz GLE43 AMG, it's crucial to understand the common problems that could be causing this issue. One of the primary culprits could be valve train problems, such as worn lifters or improperly adjusted valves, which can lead to noticeable ticking sounds. Additionally, low oil levels or poor-quality oil can result in inadequate lubrication, causing engine components to rub together and create noise. Another potential source of the ticking could be a faulty timing chain tensioner, which may fail to maintain proper tension on the timing chain, leading to irregular sounds. An exhaust leak is also a possibility, as it can produce a ticking noise that becomes more pronounced during acceleration. Lastly, spark knock, often resulting from low-quality fuel or incorrect ignition timing, can manifest as a ticking or pinging sound. While some of these issues can be diagnosed and addressed through DIY methods, it is advisable to consult a qualified mechanic for a thorough diagnosis to prevent further damage to your engine.

How urgent is it to address the ticking noise in the engine of a 2019 Mercedes-Benz GLE43 AMG?

Addressing a ticking noise in the engine of a 2019 Mercedes-Benz GLE43 AMG is not just a matter of convenience; it is a critical aspect of vehicle maintenance that should not be overlooked. The urgency of this issue stems from the potential for early detection to significantly mitigate further damage to engine components. By promptly investigating and resolving unusual noises, you can maintain the overall health and performance of your vehicle, ultimately avoiding costly repairs that may arise from neglect. Moreover, the safety of both the driver and passengers is paramount; any engine irregularities can pose serious risks while on the road. For those inclined to take a DIY approach, it is advisable to conduct a thorough inspection or consult with a qualified mechanic to accurately diagnose the source of the ticking noise. This proactive stance not only preserves the integrity of your vehicle but also ensures a safer driving experience.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.