2019 Mercedes-Benz GLC63 AMG Engine Makes A Ticking Noise

Ticking Noises in 2019 Mercedes-Benz GLC63 AMG Engine Explained

Find Repair Location
Reviewed by
Aisha
Written by RepairPal Car Genius
Updated January 14, 2025
0%
12% chance it's the
Exhaust Leak
0%
88% chance it's
Something else
The most common reasons a 2019 Mercedes-Benz GLC63 AMG engine makes a ticking noise are low oil level or pressure, an issue with the ignition system, or an exhaust leak.
  • Exhaust Leak: A damaged exhaust manifold or a loose connection in the exhaust system can cause an exhaust leak, resulting in increased noise and potential loss of engine power.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

How much does it cost to fix a 2019 Mercedes-Benz GLC63 AMG engine makes a ticking noise?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

If the drive belt idler pulley fails, there will be a very audible chirping noise from the front of the engine. This is because the idler pulley bearing is no longer smooth, and rotating causes metal to grind at high speeds. If it is not changed immediately, there is a chance it will become dislodged, or allow the drive belt to slip off. If the belt falls off, the accessory that it drives will no longer function. For instance, if the alternator belt idler pulley fails, the alternator may stop functioning. Also if the pulley begins to wobble, allowing slack in the belt, it will make an extremely loud squeaking or screeching noise, especially on cold starts. This is the belt slipping on the crankshaft pulley, and will require belt replacement once the idler pulley is replaced.

If the drive belt tensioner fails, there will be a very audible chirping, grinding, or rattling noise from the front of the engine. This is because the tensioner pulley bearing is no longer smooth, and rotating causes metal to grind at high speeds. If it is not changed immediately, there is a chance it will become dislodged, or allow the drive belt to lose tension, or break. If the belt falls off, the accessory that it drives will no longer function. Also, if the tensioner spring fails, allowing slack in the belt, it may make an extremely loud squeaking or screeching noise combined with a rattle as the tensioner bounces back and forth under load. The squealing noise is the belt slipping on the crankshaft pulley, and will require belt replacement once the belt tensioner is replaced.

An engine leaking oil does not always make a puddle on the ground. A burning smell may be noticed from the front of the vehicle after driving. This is because engine oil leaks may fall onto hot engine components, especially the exhaust manifold, and burn off before making it to the ground. This poses a risk to the engine because the leak going unnoticed may deplete the engine oil reserve, and lead to an oil starvation issue. Some engine oil leaks only occur while the engine is running, so the leak may be larger than the small spot on the ground makes it seem.

Noises can be accompanied by many annoying or worrisome sensations. Consider the noise of grinding brakes, the noise sounds much like the brake pedal and steering wheel feel. This is important, as random noises can be difficult to replicate without knowing when the sound occurs, what must be done to make the sound, and what sound it is. Any professional technician can replicate and diagnose most noises, but to ensure the vehicle is more quickly diagnosed, make sure you tell your technician these three pieces of information.

The engine oil pressure warning light will come on if the engine oil pressure is low, or if the oil pressure sensor is faulty. In either case, engine power may be reduced significantly. The check engine light may also illuminate, and an on-board diagnostic (OBD) trouble code will be stored in the vehicle's computer.

What are the potential causes of a ticking noise in the engine of a 2019 Mercedes-Benz GLC63 AMG, and how should they be diagnosed?

When diagnosing a ticking noise in the engine of a 2019 Mercedes-Benz GLC63 AMG, it's essential to adopt a systematic approach that prioritizes simpler checks before delving into more complex issues. Start with a thorough visual inspection of the engine bay to identify any obvious signs of damage or leaks that could be contributing to the noise. Next, check the engine oil levels; low or dirty oil can lead to insufficient lubrication, resulting in ticking sounds as engine components rub against each other. If the oil is adequate, use a mechanic's stethoscope to listen closely to the engine, which can help pinpoint the source of the ticking. This method allows you to differentiate between potential causes, such as valve train issues or a malfunctioning fuel injector. If these initial steps do not reveal the problem, it may be time to consult a qualified mechanic who specializes in Mercedes-Benz vehicles. They can perform a more detailed diagnosis using specialized tools, ensuring that the underlying issue is accurately identified and addressed. By following this structured diagnostic approach, you can effectively narrow down the potential causes of the ticking noise and take appropriate action.

What could be causing the ticking noise in the engine of a 2019 Mercedes-Benz GLC63 AMG?

If you're hearing a ticking noise from the engine of your 2019 Mercedes-Benz GLC63 AMG, it's crucial to understand the common problems that could be responsible. One of the primary culprits could be valve train issues, where worn lifters or malfunctioning valves may lead to irregular sounds. Additionally, a low oil level can significantly impact engine performance, as insufficient lubrication can cause components to rub against each other, resulting in a ticking noise. Another potential cause is a faulty timing chain tensioner, which can disrupt the timing of the engine and create unwanted sounds. It's also worth considering an exhaust leak, as this can produce a ticking noise that becomes more pronounced during acceleration. Lastly, spark knock, which occurs when the air-fuel mixture ignites prematurely, can manifest as a ticking or pinging sound. While these issues can be investigated at home, it's advisable to consult a qualified mechanic for a thorough diagnosis to ensure the longevity and performance of your vehicle.

How urgent is it to address the ticking noise in the engine of a 2019 Mercedes-Benz GLC63 AMG?

Addressing a ticking noise in the engine of a 2019 Mercedes-Benz GLC63 AMG is crucial for maintaining the vehicle's performance and safety. Ignoring such symptoms can lead to severe consequences, including potential engine damage that may require costly repairs. Early detection is key; by investigating the source of the noise promptly, you can prevent further deterioration of engine components. Additionally, unusual sounds can indicate underlying issues that, if left unchecked, could compromise your safety while driving. For DIY enthusiasts, it’s essential to understand that while some minor repairs may be manageable at home, a professional inspection is often necessary to accurately diagnose the problem. Taking immediate action not only preserves the integrity of your vehicle but also ensures a smoother and more efficient driving experience.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.