2022 Mercedes-Benz C43 AMG Engine Makes A Ticking Noise

Ticking Noises in 2022 Mercedes-Benz C43 AMG Engine: Causes and Solutions

Find Repair Location
Reviewed by
Aisha
Written by RepairPal Car Genius
Updated January 14, 2025
0%
12% chance it's the
Exhaust Leak
0%
88% chance it's
Something else
The most common reasons a 2022 Mercedes-Benz C43 AMG engine makes a ticking noise are low oil level or pressure, an issue with the ignition system, or an exhaust leak.
  • Exhaust Leak: A damaged exhaust manifold or a loose connection in the exhaust system can cause an exhaust leak, resulting in increased noise and potential loss of engine power.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

How much does it cost to fix a 2022 Mercedes-Benz C43 AMG engine makes a ticking noise?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

If the drive belt idler pulley fails, there will be a very audible chirping noise from the front of the engine. This is because the idler pulley bearing is no longer smooth, and rotating causes metal to grind at high speeds. If it is not changed immediately, there is a chance it will become dislodged, or allow the drive belt to slip off. If the belt falls off, the accessory that it drives will no longer function. For instance, if the alternator belt idler pulley fails, the alternator may stop functioning. Also if the pulley begins to wobble, allowing slack in the belt, it will make an extremely loud squeaking or screeching noise, especially on cold starts. This is the belt slipping on the crankshaft pulley, and will require belt replacement once the idler pulley is replaced.

If the drive belt tensioner fails, there will be a very audible chirping, grinding, or rattling noise from the front of the engine. This is because the tensioner pulley bearing is no longer smooth, and rotating causes metal to grind at high speeds. If it is not changed immediately, there is a chance it will become dislodged, or allow the drive belt to lose tension, or break. If the belt falls off, the accessory that it drives will no longer function. Also, if the tensioner spring fails, allowing slack in the belt, it may make an extremely loud squeaking or screeching noise combined with a rattle as the tensioner bounces back and forth under load. The squealing noise is the belt slipping on the crankshaft pulley, and will require belt replacement once the belt tensioner is replaced.

An engine leaking oil does not always make a puddle on the ground. A burning smell may be noticed from the front of the vehicle after driving. This is because engine oil leaks may fall onto hot engine components, especially the exhaust manifold, and burn off before making it to the ground. This poses a risk to the engine because the leak going unnoticed may deplete the engine oil reserve, and lead to an oil starvation issue. Some engine oil leaks only occur while the engine is running, so the leak may be larger than the small spot on the ground makes it seem.

Noises can be accompanied by many annoying or worrisome sensations. Consider the noise of grinding brakes, the noise sounds much like the brake pedal and steering wheel feel. This is important, as random noises can be difficult to replicate without knowing when the sound occurs, what must be done to make the sound, and what sound it is. Any professional technician can replicate and diagnose most noises, but to ensure the vehicle is more quickly diagnosed, make sure you tell your technician these three pieces of information.

The engine oil pressure warning light will come on if the engine oil pressure is low, or if the oil pressure sensor is faulty. In either case, engine power may be reduced significantly. The check engine light may also illuminate, and an on-board diagnostic (OBD) trouble code will be stored in the vehicle's computer.

What could be causing the ticking noise in a 2022 Mercedes-Benz C43 AMG engine, and how should I diagnose it?

When faced with a ticking noise in your 2022 Mercedes-Benz C43 AMG engine, a systematic diagnostic approach is essential for identifying the root cause. Start by checking the engine oil level, as low oil can lead to inadequate lubrication and result in ticking sounds. If the oil level is sufficient, inspect the valve train components, including lifters and camshaft parts, as wear and tear in these areas can also produce similar noises. Next, examine the timing chain for any signs of looseness or wear, as this can contribute to ticking as well. Additionally, consider the possibility of a faulty fuel injector, which may create a ticking sound during operation. Don’t overlook potential exhaust leaks or loose heat shields, both of which can manifest as ticking noises, particularly during changes in acceleration. Conduct a visual inspection of the engine bay for any obvious damage or loose components, and use a mechanic's stethoscope to help pinpoint the noise's source while the engine runs. If these steps do not lead to a clear diagnosis, consulting a qualified mechanic is advisable for a thorough evaluation and appropriate repairs. By following this structured approach, you can effectively narrow down the potential causes of the ticking noise and take the necessary steps to resolve the issue.

What are the common causes of a ticking noise in the engine of a 2022 Mercedes-Benz C43 AMG?

When diagnosing a ticking noise in the engine of your 2022 Mercedes-Benz C43 AMG, it's crucial to consider several common issues that could be at play. One primary suspect is the valve train, where worn lifters or camshaft lobes can create a noticeable ticking sound. Additionally, low engine oil levels can lead to insufficient lubrication, causing metal components to rub together and produce a ticking noise. An exhaust leak, particularly near the engine, can also manifest as a ticking sound, so inspecting the exhaust system for any cracks or loose connections is advisable. Another potential culprit is a faulty timing chain tensioner, which may allow the timing chain to move erratically, resulting in a ticking noise. Lastly, spark knock, often caused by poor fuel quality or incorrect engine timing, can create a ticking sound that should not be ignored. Addressing these issues promptly is essential to prevent further damage and maintain your vehicle's performance, so if you're unsure, consulting a qualified mechanic for a thorough inspection is always a wise choice.

How urgent is it to address the ticking noise in the engine of a 2022 Mercedes-Benz C43 AMG?

Addressing a ticking noise in the engine of a 2022 Mercedes-Benz C43 AMG is a matter of urgency that should not be overlooked. Early detection of such noises is crucial, as they can indicate underlying issues that, if left unaddressed, may escalate into more severe engine problems. Common causes of a ticking noise include low oil levels, worn components, or valve train issues, all of which can compromise the engine's performance and longevity. Ignoring these symptoms can lead to significant damage, potentially resulting in costly repairs and diminished vehicle reliability. Moreover, in high-performance vehicles like the C43 AMG, ensuring the engine operates smoothly is vital for both safety and driving experience. Therefore, it is highly advisable to consult a qualified mechanic for a thorough inspection and diagnosis, allowing for timely repairs that can safeguard the vehicle's performance and your safety on the road.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.