2008 Mazda 6 Is Leaking Oil

Discovering the Causes of Oil Leaks in Your 2008 Mazda 6 and How to Fix Them Effectively

Find Repair Location
Reviewed by
Andrew Hajjar
Written by RepairPal Car Genius
Updated January 14, 2025
0%
80% chance it's the
Oil System Components
0%
20% chance it's the
Engine Gaskets
The most common reasons a 2008 Mazda 6 is leaking oil are oil system component failure and leaking engine gaskets.
  • Oil System Components: A worn or damaged oil pump or filter can lead to low oil pressure, resulting in inadequate lubrication and potential engine damage.
  • Engine Gaskets: A worn or damaged engine gasket can lead to oil or coolant leaks, resulting in engine overheating or loss of lubrication.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

How much does it cost to fix a 2008 Mazda 6 is leaking oil?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

Oil pans don't wear out or break like other parts, they generally only need to be replaced because of external damage from an accident or an improperly tightened drain plug. The main symptom you will experience is an oil leak underneath the engine of your car. The oil that leaks from a damaged oil pan will range from dark brown to dark black. If the leak is large enough or occurs for long enough the oil level will be low enough to turn the oil pressure or low oil level warning light on.

The engine oil pressure warning light will come on if the engine oil pressure is low, or if the oil pressure sensor is faulty. In either case, engine power may be reduced significantly. The check engine light may also illuminate, and an on-board diagnostic (OBD) trouble code will be stored in the vehicle's computer.

What are the steps to diagnose the oil leak in a 2008 Mazda 6?

To effectively diagnose an oil leak in a 2008 Mazda 6, start by visually inspecting the engine and the area beneath the vehicle for any signs of oil accumulation or drips. This initial step helps you locate the source of the leak, which is crucial for further assessment. Next, check the oil level using the dipstick; a significant drop may indicate a leak that needs immediate attention. Pay close attention to the oil filter and drain plug, as these components are common culprits for leaks due to wear or improper installation. Additionally, examine the gaskets and seals, particularly the valve cover gasket and oil pan gasket, for any signs of deterioration or damage. If the source remains elusive, consider adding UV dye to the engine oil and using a UV light to identify the leak, as the dye will illuminate under the light. For a more thorough investigation, a pressure test on the oil system can help pinpoint the leak's location. If these methods do not yield results or if the problem appears complex, consulting a mechanic is advisable to ensure proper diagnosis and repair. This systematic approach not only aids in identifying the leak but also helps in determining the best course of action for resolution.

What are the common causes of oil leaks in a 2008 Mazda 6?

When dealing with oil leaks in a 2008 Mazda 6, it's essential to understand the common culprits that may be at play. One frequent issue is the deterioration of the oil pan gasket, which can wear out over time, leading to leaks. Similarly, the valve cover gasket, which seals the valve cover to the cylinder head, can also fail, resulting in oil seeping out. Another potential source of leaks is the oil filter housing gasket; if this component is faulty, it can allow oil to escape. Additionally, the rear main seal, located at the back of the engine, is known to develop leaks as it ages, while the seals around the oil cooler can also wear out, contributing to oil loss. Addressing these leaks promptly is crucial, as neglecting them can lead to significant engine damage. Regular inspections and maintenance can help you catch these issues early, ensuring your Mazda 6 runs smoothly and efficiently.

How urgent is it to address the oil leak in my 2008 Mazda 6?

Addressing an oil leak in your 2008 Mazda 6 is not just a matter of routine maintenance; it is a pressing issue that requires immediate attention. Ignoring an oil leak can lead to a significant drop in oil levels, which compromises the lubrication of essential engine components. This lack of lubrication can result in increased friction, leading to premature wear and tear, and ultimately, costly engine damage. Furthermore, an oil leak can cause the engine to overheat, a situation that can escalate quickly and result in catastrophic engine failure. Beyond mechanical concerns, there are safety implications to consider; leaking oil can drip onto hot engine parts, creating a fire hazard that endangers both the vehicle and its occupants. Therefore, it is crucial to address any signs of an oil leak promptly to safeguard your vehicle's performance and ensure your safety on the road.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.

2008 Mazda 6 Oil Leak Causes & Repair Costs | RepairPal