2011 Mazda 2 Cruise Control Isn't Working

Common Causes of Cruise Control Malfunctions in Your 2011 Mazda 2 and How to Fix Them

Find Repair Location
Reviewed by
Andrew Hajjar
Written by RepairPal Car Genius
Updated January 14, 2025
0%
30% chance it's the
Sensor
0%
25% chance it's the
Control Module
0%
25% chance it's the
Throttle
0%
20% chance it's
Something else
The most common reasons a 2011 Mazda 2 cruise control isn't working are failed control module, sensor or switch issues, or throttle actuation problems.
  • Sensor: A faulty sensor can lead to incorrect readings, causing issues with engine performance or triggering warning lights on the dashboard.
  • Control Module: A faulty control module can result in erratic vehicle behavior or failure of various electronic systems due to improper signal processing.
  • Throttle: A faulty throttle body or a defective accelerator pedal position sensor may be causing inconsistent acceleration and poor engine response.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

How much does it cost to fix a 2011 Mazda 2 cruise control isn't working?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

In the event that a wheel speed sensor fails, the ABS, traction control system (TCS) and manufacturer specific stability control system lights will illuminate, informing the driver that the systems are disabled. The vehicle will be more prone to tire slip, and normal driving patterns may need to be adjusted to correct for the loss of computer control. On older vehicle's, the speedometer can be affected, causing illumination of the check engine light as well.

What basic checks should I perform for cruise control issues in a 2011 Mazda 2?

When troubleshooting cruise control issues in a 2011 Mazda 2, it's essential to take a methodical approach that prioritizes simpler checks before delving into more complex diagnostics. Begin by examining the control module, sensor, and throttle, as these components are vital for the cruise control system's operation. Next, inspect the vacuum lines for any signs of leaks, since a compromised vacuum can lead to the cruise control disengaging unexpectedly. Additionally, verify that the brake lights are functioning properly; if they are stuck on, they can inadvertently signal the system to deactivate. It's also a good practice to turn off the cruise control when not in use to prevent accidental activation. When activating the cruise control, ensure you follow the correct procedure: press the ON switch, accelerate to a speed above 25 km/h, and then set the cruise control by pressing the SET switch. Finally, be cautious about the driving conditions; avoid using cruise control in hilly terrain or heavy traffic, as these scenarios can affect vehicle control. By systematically addressing these areas, you can effectively diagnose and potentially resolve cruise control issues in your Mazda 2.

What are the common problems that could cause the cruise control to stop working in a 2011 Mazda 2?

When the cruise control in your 2011 Mazda 2 ceases to function, it can be frustrating, but understanding the common problems can help you diagnose the issue effectively. One of the primary culprits could be a failed control module or a malfunctioning sensor or switch, which are essential for the cruise control system to operate correctly. Additionally, throttle actuation problems may arise, often linked to a faulty throttle actuator or issues with the throttle control system itself. It's also important to check for improper operating conditions, such as blown fuses or defective brake pedal switches, as these can interrupt the cruise control's functionality. Wiring issues, including damaged vacuum hoses or broken cables connecting the actuator to the throttle, can further complicate matters. If your check engine light is illuminated, it may indicate underlying engine-related problems that could affect the cruise control system. By systematically examining these areas, you can identify and potentially resolve the issue, restoring your vehicle's cruise control to working order.

How urgent is it to address the non-functioning cruise control in a 2011 Mazda 2?

Addressing the non-functioning cruise control in a 2011 Mazda 2 should be considered a priority, as neglecting this issue can lead to significant safety risks and driving discomfort. While it may not seem like an immediate emergency, the cruise control system plays a crucial role in maintaining a constant speed, which is particularly beneficial during long drives. A malfunctioning system can result from various factors, including a blown fuse, faulty brake switch, or wiring problems, and each of these issues can escalate if left unaddressed. For instance, a cruise control system that fails to disengage properly can lead to unexpected acceleration, posing a serious hazard on the road. Additionally, the inconvenience of having to manually control speed on long trips can lead to driver fatigue, further compromising safety. Therefore, it is advisable to diagnose and repair any cruise control issues promptly to ensure a safe and comfortable driving experience.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.

2011 Mazda 2 Cruise Control Problems & Repair Costs