2017 Land Rover Range Rover Engine Makes A Ticking Noise

Ticking Noises in 2017 Land Rover Range Rover Engine: Causes and Solutions

Find Repair Location
Reviewed by
Aisha
Written by RepairPal Car Genius
Updated January 14, 2025
0%
12% chance it's the
Exhaust Leak
0%
88% chance it's
Something else
The most common reasons a 2017 Land Rover Range Rover engine makes a ticking noise are low oil level or pressure, an issue with the ignition system, or an exhaust leak.
  • Exhaust Leak: A damaged exhaust manifold or a loose connection in the exhaust system can cause an exhaust leak, resulting in increased noise and potential loss of engine power.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

How much does it cost to fix a 2017 Land Rover Range Rover engine makes a ticking noise?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

If the drive belt idler pulley fails, there will be a very audible chirping noise from the front of the engine. This is because the idler pulley bearing is no longer smooth, and rotating causes metal to grind at high speeds. If it is not changed immediately, there is a chance it will become dislodged, or allow the drive belt to slip off. If the belt falls off, the accessory that it drives will no longer function. For instance, if the alternator belt idler pulley fails, the alternator may stop functioning. Also if the pulley begins to wobble, allowing slack in the belt, it will make an extremely loud squeaking or screeching noise, especially on cold starts. This is the belt slipping on the crankshaft pulley, and will require belt replacement once the idler pulley is replaced.

If the drive belt tensioner fails, there will be a very audible chirping, grinding, or rattling noise from the front of the engine. This is because the tensioner pulley bearing is no longer smooth, and rotating causes metal to grind at high speeds. If it is not changed immediately, there is a chance it will become dislodged, or allow the drive belt to lose tension, or break. If the belt falls off, the accessory that it drives will no longer function. Also, if the tensioner spring fails, allowing slack in the belt, it may make an extremely loud squeaking or screeching noise combined with a rattle as the tensioner bounces back and forth under load. The squealing noise is the belt slipping on the crankshaft pulley, and will require belt replacement once the belt tensioner is replaced.

An engine leaking oil does not always make a puddle on the ground. A burning smell may be noticed from the front of the vehicle after driving. This is because engine oil leaks may fall onto hot engine components, especially the exhaust manifold, and burn off before making it to the ground. This poses a risk to the engine because the leak going unnoticed may deplete the engine oil reserve, and lead to an oil starvation issue. Some engine oil leaks only occur while the engine is running, so the leak may be larger than the small spot on the ground makes it seem.

Noises can be accompanied by many annoying or worrisome sensations. Consider the noise of grinding brakes, the noise sounds much like the brake pedal and steering wheel feel. This is important, as random noises can be difficult to replicate without knowing when the sound occurs, what must be done to make the sound, and what sound it is. Any professional technician can replicate and diagnose most noises, but to ensure the vehicle is more quickly diagnosed, make sure you tell your technician these three pieces of information.

The engine oil pressure warning light will come on if the engine oil pressure is low, or if the oil pressure sensor is faulty. In either case, engine power may be reduced significantly. The check engine light may also illuminate, and an on-board diagnostic (OBD) trouble code will be stored in the vehicle's computer.

What are the potential causes of a ticking noise in the engine of a 2017 Land Rover Range Rover, and how should I diagnose them?

When diagnosing a ticking noise in the engine of a 2017 Land Rover Range Rover, it's essential to adopt a systematic approach that prioritizes simpler checks before delving into more complex issues. Start by inspecting the engine oil level, as low oil can lead to inadequate lubrication, resulting in ticking sounds. If the oil level is sufficient, examine the lifters for wear or damage, as faulty lifters are a common source of ticking noises. Next, assess the timing chain for any signs of wear or improper tension, as a malfunctioning timing chain can also contribute to the noise. Additionally, check the exhaust system for leaks, particularly near the engine, since exhaust leaks can mimic ticking sounds. Don't overlook the valve train; inspect the valves and valve lash for any irregularities that could be causing the noise. Lastly, consider the possibility of spark knock, which can occur if the engine is not receiving the correct fuel octane rating or if there are ignition system issues. By following this diagnostic approach, you can effectively identify and address the underlying cause of the ticking noise in your vehicle's engine.

What could be causing the ticking noise in the engine of a 2017 Land Rover Range Rover?

When you hear a ticking noise in the engine of your 2017 Land Rover Range Rover, it can be concerning, but understanding the common problems can help you troubleshoot effectively. One of the first things to check is the engine oil level; low oil can lead to increased friction and noise, so ensure it’s topped up. If the oil level is adequate, consider inspecting the valve lifters, as worn or damaged lifters can create a distinct ticking sound. Additionally, an exhaust leak may be the culprit, particularly if the noise intensifies under load, so examine the exhaust system for any signs of damage. Timing chain issues, such as a worn tensioner or misalignment, can also manifest as a ticking noise, making it crucial to check this component if other causes are ruled out. Lastly, be aware of spark knock, which can produce a similar sound; this may require adjustments to the engine timing or fuel quality. By systematically checking these areas, you can identify the source of the ticking noise and take appropriate action to resolve it.

How urgent is it to address the ticking noise in the engine of a 2017 Land Rover Range Rover?

Addressing the ticking noise in the engine of a 2017 Land Rover Range Rover is a matter of urgency that should not be overlooked. Early detection of such noises is crucial, as it can prevent further damage to vital engine components, which may lead to more severe issues down the line. Ignoring this symptom could result in costly repairs that could have been avoided with timely intervention. Moreover, resolving the ticking noise promptly ensures that your vehicle maintains optimal performance and efficiency, allowing for a smoother driving experience. Additionally, neglecting unusual engine sounds can pose significant safety risks, potentially leading to unexpected breakdowns while on the road. Therefore, it is essential to take immediate action to diagnose and address the ticking noise, safeguarding both your vehicle's health and your safety.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.

2017 Land Rover Range Rover Engine Ticking Noise | RepairPal