2013 Land Rover Range Rover Sport Cruise Control Isn't Working

Cruise control issues in 2013 Land Rover Range Rover Sport

Find Repair Location
Reviewed by
Bo Fader
Written by RepairPal Car Genius
Updated January 14, 2025
0%
30% chance it's the
Sensor
0%
25% chance it's the
Control Module
0%
25% chance it's the
Throttle
0%
20% chance it's
Something else
The most common reasons a 2013 Land Rover Range Rover Sport cruise control isn't working are failed control module, sensor or switch issues, or throttle actuation problems.
  • Sensor: A faulty or malfunctioning sensor can lead to incorrect readings, causing issues with engine performance or other systems relying on accurate data.
  • Control Module: A faulty control module can lead to erratic vehicle behavior or failure of various electronic systems due to improper signal processing.
  • Throttle: A faulty throttle body or a defective accelerator pedal position sensor may be causing inconsistent throttle response.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

How much does it cost to fix a 2013 Land Rover Range Rover Sport cruise control isn't working?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

In the event that a wheel speed sensor fails, the ABS, traction control system (TCS) and manufacturer specific stability control system lights will illuminate, informing the driver that the systems are disabled. The vehicle will be more prone to tire slip, and normal driving patterns may need to be adjusted to correct for the loss of computer control. On older vehicle's, the speedometer can be affected, causing illumination of the check engine light as well.

What are the steps to diagnose the cruise control issue in a 2013 Land Rover Range Rover Sport?

When diagnosing a cruise control issue in a 2013 Land Rover Range Rover Sport, it's essential to adopt a systematic diagnostic approach that begins with the simplest checks before progressing to more complex assessments. Start by verifying that you are using the correct switch to activate the cruise control, as some models require the '+' button rather than the 'resume' button. Next, if your vehicle features adaptive cruise control, ensure that the forward alert system is functioning properly, as this can indicate whether the problem lies within the cruise control system or is related to the radar system. Inspect the radar unit located under the front bumper for any obstructions or damage, as a blocked radar can hinder the adaptive cruise control's performance. Following this, conduct electrical system checks, including testing the relevant fuses and using a voltmeter to ensure proper voltage at the cruise control module. Pay special attention to the brake light switch, as a malfunctioning switch can prevent the cruise control from engaging. Additionally, check the ABS sensors for any warning lights on the dashboard, as issues here can also affect cruise control functionality. If your vehicle uses a vacuum-based system, inspect the vacuum pump and hoses for leaks. Sometimes, a simple reset by disconnecting the battery or removing the radar unit's fuse can resolve intermittent issues. Finally, utilizing a diagnostic tool can help identify any fault codes that may provide further insight into the problem. By following this structured approach, you can effectively diagnose and potentially resolve the cruise control issue in your Land Rover.

What are the common problems that could cause the cruise control to stop working in a 2013 Land Rover Range Rover Sport?

When troubleshooting the adaptive cruise control system in a 2013 Land Rover Range Rover Sport, it's important to be aware of several common problems that could lead to its failure. One of the primary issues often stems from radar and sensor malfunctions, which can result in warnings such as "Radar Blocked - IEB not working." To resolve this, inspect the radar unit for any obstructions or debris, and consider resetting the system by disconnecting the radar fuse or the vehicle's battery. Additionally, electrical and connectivity issues can disrupt the system's functionality; therefore, ensuring that the megafuse block is secure and all connections are tight is crucial. It's also wise to examine the wiring connected to the cruise control buttons for any signs of damage or dirt that could hinder performance. The ABS and wheel sensors are integral to the cruise control system, as they relay speed signals to the ECU, so checking their condition and ensuring proper communication on the CANbus is essential. In some cases, air leaks in the vacuum system may affect cruise control, particularly in older models, which necessitates a thorough inspection of hoses for cracks. Calibration issues can also arise, requiring a recalibration of the adaptive cruise control system to ensure it functions correctly. If these steps do not resolve the issue, testing the cruise control module and associated electrical components can help identify any faults that may need addressing. By systematically evaluating these areas, you can effectively troubleshoot and restore the adaptive cruise control functionality in your vehicle.

How urgent is it to address the malfunctioning cruise control in a 2013 Land Rover Range Rover Sport?

While the malfunctioning cruise control in a 2013 Land Rover Range Rover Sport may not pose an immediate safety risk, it is still advisable to address the issue in a timely manner. Ignoring the problem could lead to increased driver fatigue during long trips, as maintaining a constant speed becomes more challenging without this feature. Additionally, a malfunctioning cruise control system may indicate underlying issues, such as electrical faults or connection problems, which could escalate into more significant vehicle malfunctions if left unresolved. Therefore, while it is not critical to fix the cruise control immediately, prioritizing its diagnosis and repair can enhance your driving experience and prevent potential complications down the line. Taking proactive steps now can save you from more extensive repairs and ensure that your vehicle remains in optimal condition.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.