2014 Land Rover Range Rover Evoque Has A Vacuum Leak

Diagnosing Vacuum Leaks in Your 2014 Land Rover Range Rover Evoque and Effective Repair Strategies

Find Repair Location
Reviewed by
Aisha
Written by RepairPal Car Genius
Updated January 14, 2025
0%
40% chance it's the
Leaking Vacuum Hoses
0%
30% chance it's the
Leaking Gaskets and Seals
0%
20% chance it's the
Bad Actuators and Valves
0%
10% chance it's
Something else
The most common reasons a 2014 Land Rover Range Rover Evoque has a vacuum leak are leaking vacuum hoses, leaking gaskets and seals, or bad actuators and valves.
  • Leaking Vacuum Hoses: A cracked or disconnected vacuum hose can lead to a loss of engine vacuum, resulting in poor engine performance and increased fuel consumption.
  • Leaking Gaskets and Seals: Aged or damaged gaskets and seals can lead to fluid leaks, resulting in loss of engine oil or coolant and potential engine damage.
  • Bad Actuators and Valves: A malfunctioning actuator or valve can disrupt the proper operation of the vehicle's systems, leading to issues such as poor engine performance or erratic behavior of components like the HVAC system.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

How much does it cost to fix a 2014 Land Rover Range Rover Evoque has a vacuum leak?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

Problems with the intake manifold gasket can create the following symptoms:

  • Illuminated check engine light
  • Erratic engine performance
  • Oil and coolant leaks
  • Poor gas mileage
  • Stalling

» LEARN MORE: Intake manifold gasket symptoms

A bad valve cover gasket will result in an oil leak. You may notice oil under the car or on other parts under the hood. You might also notice a burning smell while driving.

» LEARN MORE: Signs of a bad valve cover gasket

Any time there is an emissions fault the check engine light will be displayed. The purpose of the check engine light is to inform the driver that an emission related fault has been found, and that there are on-board diagnostic (OBD) trouble codes stored in the powertrain or engine control module. Additionally, since the emissions systems are so intertwined into engine control and transmission control systems, symptoms may include nearly any sort of drivability concerns. This may include harsh shifting, failure to shift, hesitation on acceleration, jerking, engine failure to start or run, loss of power, or any number of other drivability issues.

What are the steps to diagnose a vacuum leak in a 2014 Land Rover Range Rover Evoque?

To effectively diagnose a vacuum leak in your 2014 Land Rover Range Rover Evoque, start with a systematic approach that prioritizes simpler methods before moving on to more complex diagnostics. Begin by attaching a vacuum pump to the engine when it is off; this will help you identify the source of the leak. While doing this, listen carefully for any unusual sounds that may indicate where the leak is occurring. Next, visually inspect the vacuum hoses for any signs of wear or damage, as these are common culprits for leaks. Don’t overlook the gaskets and seals, which can also fail and lead to vacuum issues. Additionally, examine the actuators and valves to ensure they are functioning properly, as faults here can contribute to leaks as well. If you still cannot locate the leak, consider using diagnostic tools to check for error codes that may point to a larger vacuum leak problem. If all else fails, consulting a professional mechanic can provide the expertise needed to resolve the issue effectively. By following this structured approach, you can efficiently diagnose and address vacuum leaks in your vehicle.

What are the common problems that could cause a vacuum leak in a 2014 Land Rover Range Rover Evoque?

When diagnosing a vacuum leak in a 2014 Land Rover Range Rover Evoque, it's essential to be aware of several common problems that could be at play. One of the primary culprits is leaking vacuum hoses, gaskets, and seals, which can deteriorate over time and lead to air escaping from the system. Additionally, bad actuators and valves can disrupt the vacuum pressure, causing performance issues. Turbo underboost problems may also arise, often linked to a malfunctioning wastegate actuator or its sensors, which can prevent the turbocharger from operating efficiently. Another critical component to check is the Mass Air Flow (MAF) sensor; if it’s faulty, it can misread the air entering the engine, exacerbating vacuum leak symptoms. Furthermore, issues with the PCV valve diaphragms and loose or improperly fitted servo vacuum lines can contribute to the overall problem. Addressing these issues promptly is vital, as they can lead to rough idling, poor engine performance, and trigger diagnostic trouble codes, ultimately affecting the vehicle's reliability and efficiency.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.