2013 Land Rover Range Rover Evoque Cruise Control Isn't Working

Resolve Cruise Control Issues in Your 2013 Land Rover Range Rover Evoque

Find Repair Location
Reviewed by
Bo Fader
Written by RepairPal Car Genius
Updated January 14, 2025
0%
30% chance it's the
Sensor
0%
25% chance it's the
Control Module
0%
25% chance it's the
Throttle
0%
20% chance it's
Something else
The most common reasons a 2013 Land Rover Range Rover Evoque cruise control isn't working are failed control module, sensor or switch issues, or throttle actuation problems.
  • Sensor: A faulty or malfunctioning sensor can lead to incorrect readings, causing issues with engine performance or other systems relying on accurate data.
  • Control Module: A faulty control module can lead to erratic vehicle behavior or failure of various electronic systems due to improper signal processing.
  • Throttle: A faulty throttle body or a defective accelerator pedal position sensor may be causing inconsistent throttle response.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

How much does it cost to fix a 2013 Land Rover Range Rover Evoque cruise control isn't working?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

In the event that a wheel speed sensor fails, the ABS, traction control system (TCS) and manufacturer specific stability control system lights will illuminate, informing the driver that the systems are disabled. The vehicle will be more prone to tire slip, and normal driving patterns may need to be adjusted to correct for the loss of computer control. On older vehicle's, the speedometer can be affected, causing illumination of the check engine light as well.

The cruise control switch can cause complete failure of the cruise control feature, but in a lucky scenario only partial functionality will be lost. This means that the cruise control may come on, but that it will not increase in speed automatically, or the cancel button does not work leading the driver to cancel cruise control with the foot brake. In some vehicles, the cruise control light may illuminate, or a warning message may be displayed due to lack of functionality.

What are the steps to diagnose the cruise control issue in a 2013 Land Rover Range Rover Evoque?

To effectively diagnose a cruise control issue in a 2013 Land Rover Range Rover Evoque, start with a thorough visual inspection of the system's basic components. Ensure that the cruise control is activated and that the vehicle is in the appropriate gear. Check for any obvious signs of malfunction, such as a non-functioning master switch or unusual relay sounds. Next, examine the vacuum system for any cracks or leaks in the hoses, as these can significantly impact performance. Following this, conduct a series of electrical tests using a multimeter to verify continuity and voltage at various points in the cruise control module. Pay special attention to the connections between the cruise control ECU and the vehicle speed sensor, as well as the brake pedal switch, since these are critical for proper operation. If all electrical tests yield normal results, the issue may lie within the cruise control module or ECU itself, which may require replacement. Additionally, ensure that any adaptive cruise control sensors are unobstructed and that steering wheel controls are functioning correctly. By following this structured approach, you can systematically identify and address the root cause of the cruise control malfunction.

What are the common problems that could cause the cruise control to stop working in a 2013 Land Rover Range Rover Evoque?

When troubleshooting cruise control issues in a 2013 Land Rover Range Rover Evoque, it's essential to consider several common problems that could be at play. One of the primary culprits is air leaks or vacuum issues, which can disrupt the system's functionality. Inspecting the vacuum hoses for any signs of wear or damage is a crucial first step, as even minor cracks can lead to significant performance problems. Additionally, electrical issues often arise from faulty wiring or corroded connections between the Cruise Control ECU and other components. Ensuring that the wiring is intact and that the connections are clean can help restore proper function. The vehicle speed sensor (VSS) also plays a vital role; if it fails to communicate effectively with the ECU, the cruise control may not engage. Furthermore, the Cruise Control ECU itself can be a point of failure, necessitating replacement if other issues are ruled out. Don't overlook the cruise control switches on the steering wheel, as problems here can lead to intermittent functionality. Lastly, ensure that the brake system is operating correctly, as any faults in the brake cut-off switch can inadvertently disable the cruise control. By methodically examining these areas, you can effectively diagnose and address the issues affecting your vehicle's cruise control system.

How urgent is it to address the malfunctioning cruise control in a 2013 Land Rover Range Rover Evoque?

While a malfunctioning cruise control in a 2013 Land Rover Range Rover Evoque may not present an immediate safety risk, it is essential to recognize the importance of addressing this issue promptly. Ignoring the malfunction can lead to more complex problems, such as electrical failures or sensor malfunctions, which could escalate into costly repairs. Additionally, the inconvenience of not having cruise control can significantly affect long drives, increasing driver fatigue and discomfort. By diagnosing and repairing the issue sooner rather than later, you not only enhance your driving experience but also maintain the overall health of your vehicle. This proactive approach can prevent further complications and ensure that your Land Rover remains in optimal condition, making it a wise choice for any DIY enthusiast looking to keep their vehicle running smoothly.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.