2012 Land Rover LR4 Cruise Control Isn't Working

Common Causes of Cruise Control Malfunctions in Your 2012 Land Rover LR4 and How to Fix Them

Find Repair Location
Reviewed by
Bo Fader
Written by RepairPal Car Genius
Updated January 14, 2025
0%
30% chance it's the
Sensor
0%
25% chance it's the
Control Module
0%
25% chance it's the
Throttle
0%
20% chance it's
Something else
The most common reasons a 2012 Land Rover LR4 cruise control isn't working are failed control module, sensor or switch issues, or throttle actuation problems.
  • Sensor: A faulty or malfunctioning sensor can lead to incorrect readings, causing issues with engine performance or other systems relying on accurate data.
  • Control Module: A faulty control module can lead to erratic vehicle behavior or failure of various electronic systems due to improper signal processing.
  • Throttle: A faulty throttle body or a defective accelerator pedal position sensor may be causing inconsistent throttle response.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

How much does it cost to fix a 2012 Land Rover LR4 cruise control isn't working?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

In the event that a wheel speed sensor fails, the ABS, traction control system (TCS) and manufacturer specific stability control system lights will illuminate, informing the driver that the systems are disabled. The vehicle will be more prone to tire slip, and normal driving patterns may need to be adjusted to correct for the loss of computer control. On older vehicle's, the speedometer can be affected, causing illumination of the check engine light as well.

What are the steps to diagnose the cruise control issue in a 2012 Land Rover LR4?

When diagnosing a cruise control issue in a 2012 Land Rover LR4, it's crucial to follow a methodical approach that prioritizes simpler checks before delving into more complex diagnostics. Begin by confirming that the cruise control light on the dashboard activates when the system is engaged, as this indicates that power is reaching the system. Next, check for any illuminated ABS or traction control lights, as these can indicate problems that may interfere with cruise control functionality. Inspect the fuses associated with the cruise control system to ensure they are intact, since a blown fuse can disrupt operation. Additionally, verify that the battery voltage is stable and above 12 volts, as insufficient voltage can lead to various electrical malfunctions. Examine the vacuum lines for any signs of leaks or damage, as these are essential for the proper functioning of the cruise control system. Conduct ground and voltage tests on the cruise control ECU connector to ensure all electrical connections are secure and functioning correctly. It's also important to check the vehicle speed sensor, as it provides critical data for the cruise control system to operate effectively. Ensure that both the brake and clutch pedals are fully released, as their engagement can trigger safety cut-offs that prevent cruise control from engaging. If these initial steps do not resolve the issue, consider disconnecting the battery for a reset, which can sometimes clear temporary glitches. For ongoing problems, more advanced troubleshooting may be required, involving detailed electrical tests of the cruise control ECU and its connections. By adhering to this structured diagnostic process, you can effectively identify and resolve the cruise control issue in your Land Rover LR4.

What are the common problems that could cause the cruise control to stop working in a 2012 Land Rover LR4?

When dealing with cruise control issues in a 2012 Land Rover LR4, several common problems may be at play. One of the first areas to investigate is the vacuum and hose system; any cracks or leaks in the vacuum lines can disrupt the cruise control's functionality, necessitating replacement with suitable fuel hoses if damage is evident. Additionally, electrical and communication failures between the Vehicle Speed Sensor (VSS) and the Electronic Control Unit (ECU) can lead to a complete shutdown of the cruise control system, so performing thorough electrical tests on wires, relays, and fuses is crucial. The brake pedal switch also plays a vital role; if the normally closed contact fails to operate correctly, it can prevent the cruise control from engaging. Furthermore, checking the relevant fuses, particularly the CC fuse, is essential to ensure they are intact. Mechanical components like the clockspring may also contribute to intermittent issues, and if all other components check out, the cruise control module itself might be the culprit, requiring replacement. Lastly, ensure the battery is in good condition, as low voltage can affect the cruise control and other electronic systems, sometimes necessitating a system reset. By systematically addressing these common problems, you can effectively troubleshoot and potentially restore the cruise control functionality in your LR4.

How urgent is it to address the malfunctioning cruise control in a 2012 Land Rover LR4?

While a malfunctioning cruise control system in a 2012 Land Rover LR4 may not pose an immediate safety risk, it is essential to recognize the broader implications of ignoring this issue. The convenience and comfort that cruise control provides during long drives cannot be overstated; without it, drivers may experience increased fatigue and discomfort, particularly on extended highway trips. Additionally, the absence of this feature can lead to higher fuel consumption, as maintaining a constant speed is more challenging without cruise control. This not only affects your wallet but also contributes to unnecessary emissions. Furthermore, the inability to maintain a consistent speed can make it easier to unintentionally exceed speed limits, increasing the risk of traffic violations. More critically, if the cruise control malfunction is symptomatic of underlying issues—such as problems with the ABS system or electrical connections—neglecting to address it could lead to more severe complications down the line. Therefore, while the cruise control itself may not be an urgent safety concern, taking proactive steps to diagnose and repair the system is advisable to ensure ongoing driving comfort, fuel efficiency, and to prevent potential safety risks from escalating.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.