The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.
When the throttle position sensor fails, the engine's computer tends to overcompensate with fuel, leading black exhaust coming from the tailpipe. There is a strong possibility of engine misfires, and the check engine light will come on.
Throttle position sensors can also develop "dead spots," or certain places along the throttle curve where it doesn't get a reading. When this happens, the above symptoms can occur but then stop when you further press or let off the gas pedal.
When the vehicle speed sensor fails or the wiring harness prevents signal transmission, the speedometer is the first thing that will stop functioning properly. This can be an intermittent issue where the speedometer only works occasionally, the speedometer may cease all function, or the speedometer may read erratically or incorrectly. Also, the traction control and anti lock brake warning lights specific to each vehicle may be illuminated, depending on the design of those systems. You may notice the vehicle hesitate to accelerate, cruise control will not function properly, and the vehicle may not shift properly through all of the gears.
In the event that a wheel speed sensor fails, the ABS, traction control system (TCS) and manufacturer specific stability control system lights will illuminate, informing the driver that the systems are disabled. The vehicle will be more prone to tire slip, and normal driving patterns may need to be adjusted to correct for the loss of computer control. On older vehicle's, the speedometer can be affected, causing illumination of the check engine light as well.
If the cruise control refuses to turn on at all, the actuator could be at fault. Likewise, if the cruise control stays on but does not maintain a consistent speed, the problem could be a bad actuator. In extreme cases, a malfunctioning actuator could cause the throttle to stick and prevent the vehicle from slowing down. These symptoms may point to a bad actuator. They may also point to other problems with the cruise control and related systems.
The cruise control switch can cause complete failure of the cruise control feature, but in a lucky scenario only partial functionality will be lost. This means that the cruise control may come on, but that it will not increase in speed automatically, or the cancel button does not work leading the driver to cancel cruise control with the foot brake. In some vehicles, the cruise control light may illuminate, or a warning message may be displayed due to lack of functionality.
A faulty cruise control module will simply result in deactivation of cruise control settings. This is because a detected error in the cruise control system could lead to hazardous driving conditions, so the module will be disabled, and the cruise control system warning light will be displayed. This will be a different message depending on make and model, and a warning light or message may be displayed on the driver instrument cluster.
When troubleshooting cruise control issues in a Land Rover Discovery, it's crucial to adopt a systematic diagnostic approach. Begin by checking for vacuum leaks, as they are responsible for a significant majority of cruise control problems. Inspect the rubber pipes for any signs of wear or damage, and consider replacing them if necessary. Next, examine the vacuum lines connected to the cruise control system, ensuring they are intact and free from leaks. Once these simpler checks are complete, move on to verifying the functionality of the control module, sensors, and throttle, as these components can also contribute to cruise control malfunctions. Additionally, be aware of other active systems like Hill Descent Control or All Terrain Progress Control, which may interfere with cruise control operation. Finally, ensure that the throttle and cruise control cables are properly adjusted, as incorrect settings can lead to further complications. By following this structured approach, you can effectively identify and resolve cruise control issues in your Land Rover Discovery, saving time and potentially costly repairs.
When diagnosing cruise control malfunctions in a Land Rover Discovery, it's essential to consider several common problems that could be affecting the system. One of the primary culprits is faulty speed sensors, which can disrupt the system's ability to maintain a consistent speed, resulting in erratic acceleration or deceleration. Additionally, electrical issues, such as damaged wiring or loose connectors, can interfere with the cruise control's functionality, leading to intermittent problems. Another factor to investigate is the presence of vacuum leaks in the engine, as these can cause fluctuations in speed and may even lead to the system disengaging unexpectedly. The brake light switch is also a critical component; if it is malfunctioning, it may prevent the cruise control from engaging or cause it to disengage when the brakes are applied. Lastly, throttle-related issues, including problems with the throttle position sensor or throttle body, can significantly impact the cruise control's performance, resulting in erratic behavior. By understanding these potential issues, DIYers can take the necessary steps to troubleshoot and resolve cruise control problems in their Land Rover Discovery.
When the cruise control in your Land Rover Discovery is not functioning, it is crucial to address the problem promptly, as neglecting it can lead to safety risks and further vehicle damage. Several factors could be at play, including a malfunctioning cruise control module, sensor, or throttle, which can disrupt the system's operation. Additionally, a bad vacuum hose or damaged vacuum lines may compromise the cruise control's effectiveness, even if you have recently replaced components. It's also important to consider that a faulty brake light can inadvertently disable the cruise control, a common issue across various vehicle models. Furthermore, the cruise control pump or solenoid valve unit, typically located under the jack panel, may require inspection and possible replacement if it is contributing to the malfunction. Given these potential issues, a thorough inspection and timely troubleshooting are essential to ensure your vehicle remains safe and reliable on the road.
See what others are asking about their Land Rover Discovery. Get answers from RepairPal's community of auto experts and enthusiasts.
Read about related problems experienced by other Land Rover Discovery drivers like you.