The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.
When a tire pressure monitoring sensor fails, the tire pressure monitoring system control module will recognize a loss in communication and turn on the warning lamp which indicates the failure. This is most often the case. However, the tire pressure monitoring sensor may also fail by reporting incorrect tire pressures. This could cause a flat tire to go unrecognized, or a properly inflated tire to signal a low or high tire pressure warning.
When a relearn is needed, for any reason, the TPMS warning light will illuminate, and many vehicles will display a message relating to the TPMS system being inoperative or loosing communication. It is important to keep a watchful eye on tire pressures when this system is having issues because there is no warning available for underinflation or overinflation of the tires.
Wheels offer very few symptoms, but these symptoms should never be ignored. Visible cracks on the wheels may appear, especially after hitting a large bump, Most often, this will also be accompanied by loss of air from the tire on that wheel. Also, vibration in the steering wheel is very common when the tire is out of balance, and improper wheel nuts or bolts can cause creaking and popping noises to develop. Again, there are very few symptoms, but they should not be ignored.
The only symptoms of a TPMS control module failure are failing to alert the driver of underinflation or overinflation of one or more tires, failure to communicate with the body control module or TPMS sensors, or erroneously reporting incorrect tire pressure.
The only symptoms requiring diagnosis for the tire pressure monitoring system warning lamp is if the warning lamp has illuminated while the tires have correct air pressure, or if the air pressure for the tires is out of specification and the warning lamp is off. This is because the overwhelming majority of cases where the TPMS lamp illuminates is due to the change in ambient temperature.
To effectively diagnose the tire pressure warning light issue on your 2017 Land Rover Discovery Sport, begin with the most straightforward step: checking the tire pressure. Use a reliable tire pressure gauge to measure the inflation levels of all four tires, ensuring they match the manufacturer's recommended specifications found on the sticker inside the driver's door jamb or in the owner's manual. If the pressure is low, inflate the tires accordingly. Next, visually inspect each tire for any signs of damage, such as punctures, cuts, or bulges, which could indicate a loss of pressure. If the tires appear to be in good condition, consider resetting the tire pressure monitoring system (TPMS) as a potential solution; consult your vehicle's manual for the specific reset procedure. Should the warning light remain illuminated after these steps, it may suggest a malfunctioning TPMS sensor, which is located inside the tire and may require replacement. If you find yourself unable to resolve the issue through these methods, it is advisable to seek assistance from a qualified mechanic or dealership for a thorough inspection and repair. By following this diagnostic approach, you can efficiently address the tire pressure warning light issue and ensure your vehicle's safety on the road.
When the tire pressure warning light stays on in a 2017 Land Rover Discovery Sport, it can indicate several underlying issues that are manageable for DIY enthusiasts. The most common reason is low tire pressure, so the first step is to check and inflate each tire to the recommended levels. If the pressure is adequate, the next area to investigate is the tire pressure sensors; a malfunctioning sensor may need replacement or recalibration. Additionally, consider the possibility of dead sensor batteries, which can prevent proper communication with the vehicle's system. It's also important to inspect the wiring and connections for any damage or corrosion, as these can disrupt the functionality of the tire pressure monitoring system. If all components appear to be in good condition, recalibrating the system according to the manufacturer's guidelines may be necessary to ensure accurate readings. By methodically addressing these potential issues, you can effectively troubleshoot and resolve the persistent tire pressure warning light.
Addressing the tire pressure warning light on your 2017 Land Rover Discovery Sport is not just a matter of convenience; it is a critical safety concern that requires immediate attention. When this warning light remains illuminated, it signals that your tires may be underinflated, which can severely compromise your vehicle's handling and braking capabilities. This is particularly dangerous in adverse weather conditions, where the risk of accidents increases significantly. Moreover, driving on underinflated tires can lead to uneven wear, resulting in premature tire replacement, which can be costly. Additionally, low tire pressure negatively impacts fuel efficiency, leading to higher fuel costs over time. Perhaps most alarmingly, neglecting this warning can heighten the risk of tire blowouts, especially at high speeds, posing a serious threat to your safety and that of others on the road. Therefore, it is essential to take prompt action by checking and adjusting your tire pressure to ensure safe and efficient driving.
See what others are asking about their Land Rover Discovery Sport. Get answers from RepairPal's community of auto experts and enthusiasts.
Read about related problems experienced by other Land Rover Discovery Sport drivers like you.