Jeep Wagoneer Tire Pressure Warning Light Stays On

Common Causes for the Tire Pressure Warning Light in Your Jeep Wagoneer and How to Resolve Them

Find Repair Location
Reviewed by
Bo Fader
Written by RepairPal Car Genius
Updated January 14, 2025
0%
40% chance it's the
Tire Leaking Air
0%
30% chance it's the
Wheel Leaking Air
0%
15% chance it's the
Tire Pressure Monitoring System
0%
15% chance it's
Something else
The most common reasons a Jeep Wagoneer tire pressure warning light stays on are a leaking tire, a wheel that no longer holds air, or a faulty tire pressure monitoring system.
  • Tire Leaking Air: A puncture, valve stem issue, or rim damage can cause a tire to leak air, leading to loss of pressure.
  • Wheel Leaking Air: A puncture or damage to the tire or rim can cause air to leak, resulting in a loss of tire pressure.
  • Tire Pressure Monitoring System: A malfunctioning tire pressure monitoring system can be caused by faulty sensors or a dead battery in the sensor units.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

How much does it cost to fix a Jeep Wagoneer tire pressure warning light stays on?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

When a tire pressure monitoring sensor fails, the tire pressure monitoring system control module will recognize a loss in communication and turn on the warning lamp which indicates the failure. This is most often the case. However, the tire pressure monitoring sensor may also fail by reporting incorrect tire pressures. This could cause a flat tire to go unrecognized, or a properly inflated tire to signal a low or high tire pressure warning.

When a relearn is needed, for any reason, the TPMS warning light will illuminate, and many vehicles will display a message relating to the TPMS system being inoperative or loosing communication. It is important to keep a watchful eye on tire pressures when this system is having issues because there is no warning available for underinflation or overinflation of the tires.

Wheels offer very few symptoms, but these symptoms should never be ignored. Visible cracks on the wheels may appear, especially after hitting a large bump, Most often, this will also be accompanied by loss of air from the tire on that wheel. Also, vibration in the steering wheel is very common when the tire is out of balance, and improper wheel nuts or bolts can cause creaking and popping noises to develop. Again, there are very few symptoms, but they should not be ignored.

The only symptoms requiring diagnosis for the tire pressure monitoring system warning lamp is if the warning lamp has illuminated while the tires have correct air pressure, or if the air pressure for the tires is out of specification and the warning lamp is off. This is because the overwhelming majority of cases where the TPMS lamp illuminates is due to the change in ambient temperature.

Troubleshooting Tire Pressure Warning Light in a Jeep Wagoneer

When dealing with the tire pressure warning light in your Jeep Wagoneer, start by checking the tire pressure to ensure it aligns with the manufacturer's recommended levels. This information can typically be found in your owner’s manual or on a sticker located inside the driver’s door jamb. If the tires are warm from driving, remember to add an extra 4 psi to the cold tire pressure recommendation. Once the tires are properly inflated, proceed to reset the tire pressure light using your vehicle's dashboard controls or the ignition method. If the light remains illuminated despite correct tire pressure, it may be necessary to reset the Tire Pressure Monitoring System (TPMS). This can often be done with an OBD2 scanner or a TPMS reset tool, especially if the sensors have lost their programmed data. By following this diagnostic approach, you can effectively troubleshoot and resolve the tire pressure warning light issue, ensuring a safer driving experience.

What to Do When the Tire Pressure Warning Light Stays On in a Jeep Wagoneer?

When the tire pressure warning light stays on in your Jeep Wagoneer, it often points to several common problems that you can address yourself. The first step is to check the tire pressure in all four tires, as low pressure is a frequent cause of the warning light. If you find any tires under-inflated, simply inflate them to the recommended levels. If the pressure is adequate but the light remains illuminated, you may need to reset the tire pressure monitoring system (TPMS). This can usually be done through the vehicle's dashboard settings or by following the ignition reset method. Another possibility is a malfunctioning tire pressure sensor, which may require replacement if it is faulty. Additionally, a weak battery in one of the sensors can also trigger the warning light; using a TPMS diagnostic tool can help you identify this issue. By being aware of these common problems, you can effectively troubleshoot and resolve the tire pressure warning light issue in your Jeep Wagoneer.

Why is the Tire Pressure Warning Light Staying On in a Jeep Wagoneer?

When the Tire Pressure Warning Light remains illuminated in your Jeep Wagoneer, it is crucial to take immediate action. Ignoring this warning can lead to unsafe driving conditions, as under-inflated or over-inflated tires can significantly affect vehicle handling and braking performance. Additionally, a leaking tire or a malfunctioning tire pressure monitoring system (TPMS) can result in more severe issues, such as tire blowouts or uneven tire wear, which may necessitate costly repairs. Furthermore, it's essential to remember that the spare tire does not have a monitoring sensor, so if it is under-inflated, it can also trigger the warning light. To ensure your safety and the longevity of your vehicle, regularly check your tire pressures, inspect for leaks, and address any faults in the TPMS system as soon as possible. Taking these steps not only enhances your driving experience but also prevents potential accidents and costly repairs down the line.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.