2014 Hyundai Veloster Tire Pressure Light Won't Go Off (TPMS)

Resolve persistent TPMS warning light in 2014 Hyundai Veloster.

Find Repair Location
Reviewed by
Devin Cabugcal
Written by RepairPal Car Genius
Updated January 14, 2025
0%
40% chance it's the
Tire Leaking Air
0%
30% chance it's the
Wheel Leaking Air
0%
15% chance it's the
Tire Pressure Monitoring System
0%
15% chance it's
Something else
The most common reasons a 2014 Hyundai Veloster tire pressure warning light stays on are a leaking tire, a wheel that no longer holds air, or a faulty tire pressure monitoring system.
  • Tire Leaking Air: A puncture, valve stem issue, or rim damage can cause a tire to leak air, leading to loss of pressure.
  • Wheel Leaking Air: A puncture or damage to the tire or rim can cause air to leak, resulting in a loss of tire pressure.
  • Tire Pressure Monitoring System: A malfunctioning tire pressure monitoring system can be caused by faulty sensors or a dead battery in the sensor units.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

How much does it cost to fix a 2014 Hyundai Veloster tire pressure warning light stays on?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

When a tire pressure monitoring sensor fails, the tire pressure monitoring system control module will recognize a loss in communication and turn on the warning lamp which indicates the failure. This is most often the case. However, the tire pressure monitoring sensor may also fail by reporting incorrect tire pressures. This could cause a flat tire to go unrecognized, or a properly inflated tire to signal a low or high tire pressure warning.

When a relearn is needed, for any reason, the TPMS warning light will illuminate, and many vehicles will display a message relating to the TPMS system being inoperative or loosing communication. It is important to keep a watchful eye on tire pressures when this system is having issues because there is no warning available for underinflation or overinflation of the tires.

Wheels offer very few symptoms, but these symptoms should never be ignored. Visible cracks on the wheels may appear, especially after hitting a large bump, Most often, this will also be accompanied by loss of air from the tire on that wheel. Also, vibration in the steering wheel is very common when the tire is out of balance, and improper wheel nuts or bolts can cause creaking and popping noises to develop. Again, there are very few symptoms, but they should not be ignored.

The only symptoms of a TPMS control module failure are failing to alert the driver of underinflation or overinflation of one or more tires, failure to communicate with the body control module or TPMS sensors, or erroneously reporting incorrect tire pressure.

The only symptoms requiring diagnosis for the tire pressure monitoring system warning lamp is if the warning lamp has illuminated while the tires have correct air pressure, or if the air pressure for the tires is out of specification and the warning lamp is off. This is because the overwhelming majority of cases where the TPMS lamp illuminates is due to the change in ambient temperature.

What steps should I take to diagnose the tire pressure light issue on my 2014 Hyundai Veloster?

To effectively diagnose the tire pressure light issue on your 2014 Hyundai Veloster, start by checking the tire pressure of all tires, including the spare if it has a sensor. Ensure they are inflated to the recommended levels indicated on the tire information placard, typically found on the driver's side doorjamb or in the owner's manual. It's best to check the pressure when the tires are cold, as temperature fluctuations can affect readings. Next, conduct a visual inspection of the tires for any visible damage or signs of leaks. If the pressure is correct and the tires appear intact, attempt to reset the Tire Pressure Monitoring System (TPMS). You can do this by driving at a speed of at least 50 mph for about 10 minutes, which may allow the system to recalibrate automatically. Alternatively, if your Veloster is equipped with a TPMS reset button, press and hold it until the light blinks three times, then drive normally for about 20 minutes. If these methods do not work, consider overinflating each tire by 3 PSI, deflating them completely, and then reinflating to the recommended pressure before driving for another 20 minutes. If the light continues to stay on or blinks, it may indicate a malfunction in the TPMS system, necessitating a check for faulty sensors or communication issues. Always refer to your owner's manual for specific instructions related to your vehicle model, and if the problem persists, consult a professional mechanic for further diagnosis and repair.

What could cause the tire pressure light to remain on in a 2014 Hyundai Veloster?

When the tire pressure monitoring system (TPMS) light remains illuminated in a 2014 Hyundai Veloster, it can be attributed to several common problems that DIY enthusiasts can troubleshoot. First, incorrect tire pressure is a primary culprit; ensure that all tires are inflated to the recommended levels specified on the placard located in the driver's door jamb. It's crucial to check the pressure when the tires are cold for the most accurate reading. Additionally, issues with the TPMS sensors themselves can cause the light to stay on, particularly if a sensor is malfunctioning or has a dead battery. If the light blinks initially and then stays on, this may indicate a sensor fault. Communication issues between the sensors and the vehicle's system can also lead to intermittent blinking of the light, which may resolve after driving for a while. After adjusting tire pressures, remember to reset the TPMS system, which can often be done via the vehicle's infotainment system or a specific button. If you've recently installed new wheels or sensors, give the system some time to recognize them, as driving a few miles can facilitate this process. Lastly, be cautious of over-inflated tires, as excessive pressure can also trigger the TPMS light. By systematically checking these factors, you can effectively diagnose and resolve the issue with the TPMS light on your Hyundai Veloster.

How urgent is it to address the tire pressure light issue in my 2014 Hyundai Veloster?

Addressing the tire pressure light in your 2014 Hyundai Veloster is not just a matter of convenience; it is a critical safety concern that demands immediate attention. Ignoring this warning can lead to underinflated tires, which significantly compromise your vehicle's traction and handling, increasing the likelihood of accidents. Moreover, driving on improperly inflated tires can severely impact fuel efficiency, forcing your engine to work harder and resulting in higher fuel costs over time. Additionally, neglecting tire pressure can lead to uneven and accelerated tire wear, ultimately shortening their lifespan and necessitating costly replacements. If the tire pressure light remains illuminated even after adjusting the tire pressure, it may signal deeper issues such as a tire leak or a malfunctioning sensor, which require prompt professional evaluation to prevent further damage. Therefore, it is essential to take immediate action when the tire pressure light activates, ensuring your vehicle remains safe, efficient, and in optimal condition.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.

2014 Hyundai Veloster Tire Pressure Warning Light Fixes