2024 Hyundai Palisade Engine Makes A Ticking Noise

Common Causes of Ticking Noises in Your 2024 Hyundai Palisade Engine and How to Address Them

Find Repair Location
Reviewed by
Devin Cabugcal
Written by RepairPal Car Genius
Updated January 14, 2025
0%
12% chance it's the
Exhaust Leak
0%
88% chance it's
Something else
The most common reasons a 2024 Hyundai Palisade engine makes a ticking noise are low oil level or pressure, an issue with the ignition system, or an exhaust leak.
  • Exhaust Leak: A damaged exhaust manifold or a loose connection in the exhaust system can cause an exhaust leak, resulting in increased noise and potential loss of engine power.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

How much does it cost to fix a 2024 Hyundai Palisade engine makes a ticking noise?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

If the drive belt idler pulley fails, there will be a very audible chirping noise from the front of the engine. This is because the idler pulley bearing is no longer smooth, and rotating causes metal to grind at high speeds. If it is not changed immediately, there is a chance it will become dislodged, or allow the drive belt to slip off. If the belt falls off, the accessory that it drives will no longer function. For instance, if the alternator belt idler pulley fails, the alternator may stop functioning. Also if the pulley begins to wobble, allowing slack in the belt, it will make an extremely loud squeaking or screeching noise, especially on cold starts. This is the belt slipping on the crankshaft pulley, and will require belt replacement once the idler pulley is replaced.

If the drive belt tensioner fails, there will be a very audible chirping, grinding, or rattling noise from the front of the engine. This is because the tensioner pulley bearing is no longer smooth, and rotating causes metal to grind at high speeds. If it is not changed immediately, there is a chance it will become dislodged, or allow the drive belt to lose tension, or break. If the belt falls off, the accessory that it drives will no longer function. Also, if the tensioner spring fails, allowing slack in the belt, it may make an extremely loud squeaking or screeching noise combined with a rattle as the tensioner bounces back and forth under load. The squealing noise is the belt slipping on the crankshaft pulley, and will require belt replacement once the belt tensioner is replaced.

An engine leaking oil does not always make a puddle on the ground. A burning smell may be noticed from the front of the vehicle after driving. This is because engine oil leaks may fall onto hot engine components, especially the exhaust manifold, and burn off before making it to the ground. This poses a risk to the engine because the leak going unnoticed may deplete the engine oil reserve, and lead to an oil starvation issue. Some engine oil leaks only occur while the engine is running, so the leak may be larger than the small spot on the ground makes it seem.

Noises can be accompanied by many annoying or worrisome sensations. Consider the noise of grinding brakes, the noise sounds much like the brake pedal and steering wheel feel. This is important, as random noises can be difficult to replicate without knowing when the sound occurs, what must be done to make the sound, and what sound it is. Any professional technician can replicate and diagnose most noises, but to ensure the vehicle is more quickly diagnosed, make sure you tell your technician these three pieces of information.

The engine oil pressure warning light will come on if the engine oil pressure is low, or if the oil pressure sensor is faulty. In either case, engine power may be reduced significantly. The check engine light may also illuminate, and an on-board diagnostic (OBD) trouble code will be stored in the vehicle's computer.

What are the initial diagnostic steps to take for a ticking noise in the engine of a 2024 Hyundai Palisade?

When faced with a ticking noise in the engine of your 2024 Hyundai Palisade, it's essential to adopt a systematic diagnostic approach. Begin by checking the engine oil level, as insufficient oil can lead to increased friction and noise. Next, visually inspect engine components for any signs of wear or damage, particularly the timing belt and pulleys, which are critical for engine function. Listening closely can help you localize the noise, allowing you to differentiate between potential issues. Additionally, examine for any loose parts that may be rattling, such as heat shields or exhaust components, which can contribute to unwanted sounds. Utilizing an OBD-II scanner to check for error codes can provide further insights into underlying problems. If these initial steps do not reveal the source of the noise, or if you feel uncertain about proceeding, consulting a qualified mechanic is a prudent choice to ensure your vehicle is properly assessed and repaired. By following this structured approach, you can effectively diagnose the ticking noise and take the necessary steps to resolve it.

What could be causing the ticking noise in the engine of a 2024 Hyundai Palisade?

When you hear a ticking noise coming from the engine of your 2024 Hyundai Palisade, it’s crucial to identify the underlying cause to prevent further damage. One common issue is low engine oil, which can lead to increased friction and noise as the engine components struggle to operate smoothly. Regularly checking and maintaining proper oil levels can help mitigate this problem. Another potential culprit is worn valve lifters; if these components are damaged, they may not function correctly, resulting in a distinct ticking sound. Additionally, faulty fuel injectors can contribute to this noise, as they may not be delivering fuel efficiently. An exhaust leak is another possibility, often noticeable when the engine is running, as escaping gases can create a ticking or tapping sound. Lastly, issues with the timing belt, such as misalignment or wear, can also manifest as a ticking noise. If you encounter this issue, it’s advisable to conduct a thorough inspection or consult a professional mechanic to accurately diagnose and address the problem before it escalates.

How urgent is it to address the ticking noise in the engine of a 2024 Hyundai Palisade?

When you hear a ticking noise in the engine of your 2024 Hyundai Palisade, it’s crucial to act swiftly. Early detection is key, as this noise can indicate underlying problems such as low oil levels, worn components, or valve issues that, if left unchecked, may escalate into more severe engine damage. Ignoring this symptom not only risks costly repairs but also compromises the safety and reliability of your vehicle, putting both you and your passengers at risk. While some may consider the noise a minor annoyance, it’s essential to recognize that timely intervention can prevent further complications. Therefore, if you notice a ticking sound, it’s advisable to conduct a thorough inspection or consult a qualified mechanic to diagnose the issue accurately. Addressing the problem promptly ensures your Hyundai Palisade continues to perform optimally and safely on the road.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.