The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.
When a tire pressure monitoring sensor fails, the tire pressure monitoring system control module will recognize a loss in communication and turn on the warning lamp which indicates the failure. This is most often the case. However, the tire pressure monitoring sensor may also fail by reporting incorrect tire pressures. This could cause a flat tire to go unrecognized, or a properly inflated tire to signal a low or high tire pressure warning.
When a relearn is needed, for any reason, the TPMS warning light will illuminate, and many vehicles will display a message relating to the TPMS system being inoperative or loosing communication. It is important to keep a watchful eye on tire pressures when this system is having issues because there is no warning available for underinflation or overinflation of the tires.
Wheels offer very few symptoms, but these symptoms should never be ignored. Visible cracks on the wheels may appear, especially after hitting a large bump, Most often, this will also be accompanied by loss of air from the tire on that wheel. Also, vibration in the steering wheel is very common when the tire is out of balance, and improper wheel nuts or bolts can cause creaking and popping noises to develop. Again, there are very few symptoms, but they should not be ignored.
The only symptoms of a TPMS control module failure are failing to alert the driver of underinflation or overinflation of one or more tires, failure to communicate with the body control module or TPMS sensors, or erroneously reporting incorrect tire pressure.
The only symptoms requiring diagnosis for the tire pressure monitoring system warning lamp is if the warning lamp has illuminated while the tires have correct air pressure, or if the air pressure for the tires is out of specification and the warning lamp is off. This is because the overwhelming majority of cases where the TPMS lamp illuminates is due to the change in ambient temperature.
To effectively diagnose the tire pressure warning light issue in your 2014 Hyundai Elantra GT, start with the simplest solutions before progressing to more complex diagnostics. Begin by checking the tire pressure of all tires, including the spare, ensuring they are inflated to the recommended levels specified on the tire information placard. This is crucial as incorrect tire pressure is a common cause of the warning light. If the pressure is correct, attempt to reset the Tire Pressure Monitoring System (TPMS) using either the drive reset method or the TPMS reset button located near the steering wheel. If the light remains illuminated, investigate potential sensor issues, as a malfunctioning sensor can trigger the warning. Additionally, consider electrical problems; disconnecting the battery may help reset the system. Utilize your vehicle's LCD display to monitor tire pressure readings, which can provide further insights. If these steps do not resolve the issue, consulting a professional mechanic or a Hyundai dealership may be necessary for a thorough diagnosis. By following this structured approach, you can efficiently identify and address the tire pressure warning light concern.
When the tire pressure warning light stays on in your 2014 Hyundai Elantra GT, it typically indicates common issues that can be resolved through DIY troubleshooting. One of the first steps is to check the tire pressure, ensuring it aligns with the recommended PSI found on the tire information placard. If the pressure is significantly off, either too low or too high, this can trigger the warning light. If the pressure is correct, driving the vehicle at 50 mph for about 10 minutes may help the Tire Pressure Monitoring System (TPMS) recalibrate and potentially turn off the light. If the light remains illuminated, you can manually reset the TPMS by locating the reset button, usually positioned near the steering wheel, and holding it until the light blinks three times. Additionally, if you suspect sensor issues, inflating each tire slightly above the recommended pressure and then fully deflating them can sometimes reset the sensors. If these DIY methods do not resolve the issue, it may indicate a more complex problem with the TPMS system or the vehicle's battery, which would necessitate professional diagnosis and repair. Understanding these common problems and their solutions empowers you to effectively address the tire pressure warning light issue in your Elantra GT.
Addressing the tire pressure warning light on your 2014 Hyundai Elantra GT is an urgent matter that should not be overlooked. Ignoring this warning can lead to serious safety risks, as low tire pressure can compromise your vehicle's handling and stability, increasing the likelihood of a tire blowout, particularly at high speeds. This not only endangers your safety but also that of others on the road. Furthermore, underinflated tires can negatively impact your fuel efficiency, leading to higher fuel costs and a shorter lifespan for your tires. The Tire Pressure Monitoring System (TPMS) is designed to alert you to these issues, and if the warning light is flashing, it may indicate a malfunction within the system itself, which could result in inaccurate pressure readings. Therefore, it is crucial to promptly check and inflate your tires to the recommended pressure, typically around 33 PSI for your Elantra, and reset the TPMS if necessary. Neglecting these steps could lead to more significant problems down the line, including costly repairs or even a complete system failure. Prioritizing tire maintenance not only ensures your safety but also enhances the overall performance and longevity of your vehicle.
Read about related problems experienced by other Hyundai Elantra GT drivers like you.
See what others are asking about their Hyundai Elantra GT. Get answers from RepairPal's community of auto experts and enthusiasts.