The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.
When the vehicle speed sensor fails or the wiring harness prevents signal transmission, the speedometer is the first thing that will stop functioning properly. This can be an intermittent issue where the speedometer only works occasionally, the speedometer may cease all function, or the speedometer may read erratically or incorrectly. Also, the traction control and anti lock brake warning lights specific to each vehicle may be illuminated, depending on the design of those systems. You may notice the vehicle hesitate to accelerate, cruise control will not function properly, and the vehicle may not shift properly through all of the gears.
In the event that a wheel speed sensor fails, the ABS, traction control system (TCS) and manufacturer specific stability control system lights will illuminate, informing the driver that the systems are disabled. The vehicle will be more prone to tire slip, and normal driving patterns may need to be adjusted to correct for the loss of computer control. On older vehicle's, the speedometer can be affected, causing illumination of the check engine light as well.
The cruise control switch can cause complete failure of the cruise control feature, but in a lucky scenario only partial functionality will be lost. This means that the cruise control may come on, but that it will not increase in speed automatically, or the cancel button does not work leading the driver to cancel cruise control with the foot brake. In some vehicles, the cruise control light may illuminate, or a warning message may be displayed due to lack of functionality.
To effectively diagnose the cruise control issue in your 2014 Hyundai Elantra GT, begin with the basics by checking the fuses associated with the cruise control system. This initial step is crucial as it helps rule out any simple electrical failures. Next, observe the cruise control indicator light; if it illuminates but the system fails to engage, this suggests a deeper issue. Utilize an OBD-II scanner to check for error codes, as these can provide insights into potential problems with the Powertrain Control Module (PCM) or related sensors. Pay particular attention to the brake switch and throttle position sensor, as malfunctions here can prevent the cruise control from functioning. Additionally, inspect the clock spring within the steering column, as a defect can lead to multiple electrical issues, including cruise control failure. If the Electronic Stability Control (ESC) light is active, consider temporarily disabling the ESC to see if it resolves the cruise control problem. If these steps do not yield results, it may be necessary to consult a professional mechanic for a comprehensive diagnosis, ensuring that all potential issues are thoroughly examined. By following this structured approach, you can systematically identify and address the underlying causes of your cruise control malfunction.
When dealing with cruise control issues in a 2014 Hyundai Elantra GT, it's essential to understand the common problems that may arise. Start by examining the electrical system, as blown fuses or faulty connections can easily disable the cruise control. Next, consider the clock spring, which is crucial for connecting the steering wheel controls to the vehicle's electrical systems; a malfunction here can disrupt cruise control functionality. Additionally, inspect the brake pedal and brake light switch, as any issues with these components can interfere with the cruise control system's operation. The electronic throttle control system is another area to investigate, as defects in this system have been reported and can lead to speed control problems. Furthermore, check for any steering system issues, such as a faulty rack and pinion, which may affect the cruise control's performance. Lastly, be aware that the Electronic Stability Control (ESC) system can also impact cruise control; if the ESC light is illuminated, it may indicate a problem that needs to be resolved before the cruise control will work properly. By systematically troubleshooting these areas, you can identify and address the root cause of the cruise control malfunction in your Elantra GT.
When it comes to the non-functioning cruise control in your 2014 Hyundai Elantra GT, understanding the urgency of the situation is crucial. While it may not seem like an immediate emergency, neglecting this issue can lead to safety risks, especially if it is linked to other electrical problems, such as a malfunctioning Electronic Stability Control (ESC) system. A flashing ESC light could indicate deeper issues that, if left unaddressed, might compromise your vehicle's overall safety. Additionally, if you frequently embark on long drives, the lack of cruise control can diminish your driving comfort and increase fatigue, making it more challenging to maintain focus on the road. Therefore, while the repair may be straightforward and relatively inexpensive if it’s a simple fix like a faulty clock spring, delaying attention to the problem could result in more complex and costly repairs down the line. It’s advisable to have a qualified mechanic assess the situation promptly to ensure your vehicle remains safe and convenient for your driving needs.
See what others are asking about their Hyundai Elantra GT. Get answers from RepairPal's community of auto experts and enthusiasts.
Read about related problems experienced by other Hyundai Elantra GT drivers like you.