The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.
A faulty oxygen sensor is one of the most common causes of a check engine light. Symptoms may include a decrease in fuel mileage, hesitation or misfiring from the engine, rough idling or even stalling. A faulty sensor may cause the vehicle to fail an emissions test.
Any time there is an emissions fault the check engine light will be displayed. The purpose of the check engine light is to inform the driver that an emission related fault has been found, and that there are on-board diagnostic (OBD) trouble codes stored in the powertrain or engine control module. Additionally, since the emissions systems are so intertwined into engine control and transmission control systems, symptoms may include nearly any sort of drivability concerns. This may include harsh shifting, failure to shift, hesitation on acceleration, jerking, engine failure to start or run, loss of power, or any number of other drivability issues.
Due to the nature of electrical systems on modern vehicles, the range of problems these can cause are nearly limitless. However, there is a way to categorize them in two ways. Permanent and intermittent problems. Permanent problems appear and remain. This may be the vehicle will not start, the radio does not work, or the door chime will not turn off among many, many others. These problems are more straight-forward to diagnose since they present themselves at all time. This means there will always be a fault to find. Intermittent electrical problems, however, can be difficult or impossible to locate, since they appear then disappear without warning. The best case scenario for an intermittent issue is when replicating the problem is easily accomplished and understood. This allows a technician to make an issue semi-permanent, allowing them to find the fault. Other issues that come and go without warning and cannot be replicated on demand must occur when the technician is servicing the vehicle, otherwise there is no problem to correct. It is most important to understand that electrical system faults always require inspection, and can include the vehicle working in any manner, or not working at all.
Like we noted in the last section, general diagnosis symptoms are the most vague of the bunch. There are several diagnostic spectrums, electrical diagnosis, drivability diagnostics, engine diagnostics, transmission diagnostics, and the list could continue for about 5 or 10 more spectrums of diagnostics. The most important take-away here, is that general diagnostics are diagnostics that have no other spectrum in which they fit, or the problem is unknown. This means that any vehicle left outside of a repair facility with the keys and an authorization to perform diagnosis will be diagnosed under the general diagnosis spectrum.
When the Check Engine Light comes on, you may experience engine performance issues such as poor acceleration, rough idling, or an engine that won't start. In some cases, no abnormal symptoms will be experienced. Other systems like the transmission or ABS can cause the Check Engine Light to illuminate and lights for those systems can come on at the same time. Similar lights may say "Check Engine Soon", "Malfunction Indicator Light" or just "Check". In rare case the engine can overheat.
When the check engine light in your 2014 Honda Crosstour begins to flash, it is a clear signal that immediate action is required. This warning indicates a serious issue that, if left unaddressed, could lead to significant damage to your vehicle's engine or other critical systems. Ignoring a flashing light not only risks costly repairs but can also compromise your safety on the road. Common causes for a flashing check engine light include misfires, overheating, or issues with the fuel system, all of which can escalate quickly if not dealt with promptly. Therefore, it is essential to prioritize an inspection by a qualified mechanic to diagnose the underlying problem and perform necessary repairs. Taking swift action not only protects your investment but also ensures your vehicle remains safe and reliable for your journeys.
When faced with a check engine light on your 2014 Honda Crosstour, the first step is to check the gas cap, as a loose or missing cap is a common and easily fixable issue that can trigger the light. If the gas cap is secure, visually inspect the engine bay for any obvious problems, such as disconnected hoses or leaks. If no immediate issues are apparent, using an OBD-II scanner can be invaluable; it allows you to read the trouble codes stored in the vehicle's computer, providing insight into the specific problem. Once you have identified the issue, it’s crucial to address it before resetting the check engine light to avoid further complications. If these initial steps do not resolve the problem, seeking a professional diagnosis is advisable to ensure that any underlying issues are properly addressed. By following this methodical approach, you can effectively troubleshoot the check engine light and maintain your vehicle's health.
Read about related problems experienced by other Honda Crosstour drivers like you.
See what others are asking about their Honda Crosstour. Get answers from RepairPal's community of auto experts and enthusiasts.