2015 Honda CR-Z Has A Check Engine Light

Common Causes of the Check Engine Light in Your 2015 Honda CR-Z and How to Resolve Them

Find Repair Location
Reviewed by
Devin Cabugcal
Written by RepairPal Car Genius
Updated January 14, 2025
0%
40% chance it's the
Emissions System
0%
60% chance it's
Something else
The most common reasons a 2015 Honda CR-Z has a check engine light are an emissions system component, a sensor, or a catalytic converter.
  • Emissions System: A faulty emissions system component, such as an oxygen sensor or EGR valve, can lead to increased emissions and trigger the check engine light.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

How much does it cost to fix a 2015 Honda CR-Z has a check engine light?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

A faulty oxygen sensor is one of the most common causes of a check engine light. Symptoms may include a decrease in fuel mileage, hesitation or misfiring from the engine, rough idling or even stalling. A faulty sensor may cause the vehicle to fail an emissions test.

Any time there is an emissions fault the check engine light will be displayed. The purpose of the check engine light is to inform the driver that an emission related fault has been found, and that there are on-board diagnostic (OBD) trouble codes stored in the powertrain or engine control module. Additionally, since the emissions systems are so intertwined into engine control and transmission control systems, symptoms may include nearly any sort of drivability concerns. This may include harsh shifting, failure to shift, hesitation on acceleration, jerking, engine failure to start or run, loss of power, or any number of other drivability issues.

Due to the nature of electrical systems on modern vehicles, the range of problems these can cause are nearly limitless. However, there is a way to categorize them in two ways. Permanent and intermittent problems. Permanent problems appear and remain. This may be the vehicle will not start, the radio does not work, or the door chime will not turn off among many, many others. These problems are more straight-forward to diagnose since they present themselves at all time. This means there will always be a fault to find. Intermittent electrical problems, however, can be difficult or impossible to locate, since they appear then disappear without warning. The best case scenario for an intermittent issue is when replicating the problem is easily accomplished and understood. This allows a technician to make an issue semi-permanent, allowing them to find the fault. Other issues that come and go without warning and cannot be replicated on demand must occur when the technician is servicing the vehicle, otherwise there is no problem to correct. It is most important to understand that electrical system faults always require inspection, and can include the vehicle working in any manner, or not working at all.

Like we noted in the last section, general diagnosis symptoms are the most vague of the bunch. There are several diagnostic spectrums, electrical diagnosis, drivability diagnostics, engine diagnostics, transmission diagnostics, and the list could continue for about 5 or 10 more spectrums of diagnostics. The most important take-away here, is that general diagnostics are diagnostics that have no other spectrum in which they fit, or the problem is unknown. This means that any vehicle left outside of a repair facility with the keys and an authorization to perform diagnosis will be diagnosed under the general diagnosis spectrum.

When the Check Engine Light comes on, you may experience engine performance issues such as poor acceleration, rough idling, or an engine that won't start. In some cases, no abnormal symptoms will be experienced. Other systems like the transmission or ABS can cause the Check Engine Light to illuminate and lights for those systems can come on at the same time. Similar lights may say "Check Engine Soon", "Malfunction Indicator Light" or just "Check". In rare case the engine can overheat.

What are the initial diagnostic steps to take for a check engine light on a 2015 Honda CR-Z?

When faced with a check engine light on your 2015 Honda CR-Z, it's essential to adopt a systematic diagnostic approach. Begin by checking the gas cap; a loose or damaged cap is a common culprit that can easily trigger the light. Next, take a moment to observe the dashboard gauges for any unusual readings that might indicate specific issues. Utilizing an OBD-II scanner is a crucial step, as it allows you to retrieve error codes that provide insight into the underlying problem. Additionally, visually inspect the wiring and connections in the engine bay for any signs of damage or disconnection, as these can also lead to warning lights. Don't forget to check the levels of essential fluids like oil and coolant, as low levels can sometimes activate the check engine light. If these initial steps do not resolve the issue, it may be time to consult a professional mechanic for a more thorough diagnosis. By following this structured approach, you can effectively narrow down the potential causes of the check engine light and take appropriate action.

What are the common problems that could cause the check engine light to illuminate in a 2015 Honda CR-Z?

When the check engine light comes on in your 2015 Honda CR-Z, it can be concerning, but understanding the common problems can help you troubleshoot effectively. One of the most frequent culprits is a loose or faulty gas cap, which can lead to fuel vapor leaks and trigger the warning light. Another common issue involves spark plugs and their associated wires; worn or damaged components can disrupt the ignition process, causing the light to illuminate. Additionally, low oil levels or pressure can also activate the check engine light, signaling potential engine problems that require immediate attention. By checking these areas first, you can often identify and resolve the issue without needing professional assistance, making it a great starting point for any DIY repair effort.

How urgent is it to address the check engine light in a 2015 Honda CR-Z?

When the check engine light illuminates in your 2015 Honda CR-Z, it serves as a critical alert that should not be ignored. This warning indicator signifies that there is a problem within the vehicle that requires immediate attention, as neglecting it can lead to more severe issues, including costly repairs and compromised vehicle safety. Commonly, the check engine light is triggered by problems within the emissions system, which can adversely affect your car's performance and fuel efficiency. For DIY enthusiasts, while it may be tempting to delay addressing the light, doing so can exacerbate the underlying issue, potentially leading to significant damage that could have been avoided with prompt action. Therefore, it is highly advisable to conduct a thorough inspection or consult a mechanic as soon as the light comes on. This proactive approach not only helps maintain the health and performance of your Honda CR-Z but also ensures a safer driving experience.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.