The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.
A faulty oxygen sensor is one of the most common causes of a check engine light. Symptoms may include a decrease in fuel mileage, hesitation or misfiring from the engine, rough idling or even stalling. A faulty sensor may cause the vehicle to fail an emissions test.
Any time there is an emissions fault the check engine light will be displayed. The purpose of the check engine light is to inform the driver that an emission related fault has been found, and that there are on-board diagnostic (OBD) trouble codes stored in the powertrain or engine control module. Additionally, since the emissions systems are so intertwined into engine control and transmission control systems, symptoms may include nearly any sort of drivability concerns. This may include harsh shifting, failure to shift, hesitation on acceleration, jerking, engine failure to start or run, loss of power, or any number of other drivability issues.
Due to the nature of electrical systems on modern vehicles, the range of problems these can cause are nearly limitless. However, there is a way to categorize them in two ways. Permanent and intermittent problems. Permanent problems appear and remain. This may be the vehicle will not start, the radio does not work, or the door chime will not turn off among many, many others. These problems are more straight-forward to diagnose since they present themselves at all time. This means there will always be a fault to find. Intermittent electrical problems, however, can be difficult or impossible to locate, since they appear then disappear without warning. The best case scenario for an intermittent issue is when replicating the problem is easily accomplished and understood. This allows a technician to make an issue semi-permanent, allowing them to find the fault. Other issues that come and go without warning and cannot be replicated on demand must occur when the technician is servicing the vehicle, otherwise there is no problem to correct. It is most important to understand that electrical system faults always require inspection, and can include the vehicle working in any manner, or not working at all.
Like we noted in the last section, general diagnosis symptoms are the most vague of the bunch. There are several diagnostic spectrums, electrical diagnosis, drivability diagnostics, engine diagnostics, transmission diagnostics, and the list could continue for about 5 or 10 more spectrums of diagnostics. The most important take-away here, is that general diagnostics are diagnostics that have no other spectrum in which they fit, or the problem is unknown. This means that any vehicle left outside of a repair facility with the keys and an authorization to perform diagnosis will be diagnosed under the general diagnosis spectrum.
When the Check Engine Light comes on, you may experience engine performance issues such as poor acceleration, rough idling, or an engine that won't start. In some cases, no abnormal symptoms will be experienced. Other systems like the transmission or ABS can cause the Check Engine Light to illuminate and lights for those systems can come on at the same time. Similar lights may say "Check Engine Soon", "Malfunction Indicator Light" or just "Check". In rare case the engine can overheat.
When faced with a check engine light on your 2017 Ford Edge, the first step is to visually inspect the gas cap, ensuring it is securely tightened and free from damage, as this is a common trigger for the warning light. Next, take a moment to check the dashboard for any additional warning indicators that may provide further insight into the problem. If these initial checks do not resolve the issue, utilizing an OBD-II diagnostic scanner is a crucial next step. By connecting the scanner to your vehicle's onboard diagnostic system, you can retrieve specific error codes that indicate the nature of the problem. Make sure to document these codes, as they can be referenced in online databases to understand their meanings and potential causes. Additionally, inspect the wiring and connections under the hood for any signs of wear or disconnection, as these can also lead to the check engine light being activated. If, after these steps, the cause remains elusive, seeking the expertise of a qualified mechanic may be necessary to ensure a thorough diagnosis and appropriate repairs. By following this structured approach, you can effectively troubleshoot the check engine light issue and potentially save on repair costs.
When the check engine light comes on in a 2017 Ford Edge, it can be a source of concern for any DIY car owner. One of the most frequent culprits is a loose gas cap, which is an easy fix that can often be overlooked. Another common issue is a faulty oxygen sensor, which not only affects the vehicle's emissions but can also lead to reduced fuel efficiency, making it crucial to address. Additionally, problems with the catalytic converter can arise, indicating a more serious issue that may require professional attention. Spark plug wear is another factor that can trigger the light, as worn plugs can lead to misfires and poor engine performance. The mass airflow sensor is also a key component that, if malfunctioning, can disrupt the air-fuel mixture, leading to engine performance issues. Lastly, a failing ignition coil can cause rough idling and misfiring, further illuminating the check engine light. For those looking to tackle these issues themselves, it’s important to start with a diagnostic scan to identify the specific problem, allowing for a more targeted approach to repairs.
When the check engine light illuminates in a 2017 Ford Edge, it is essential to recognize the urgency of the situation. This warning light is not merely a nuisance; it signals potential issues within the engine or emissions system that could range from minor to severe. Ignoring this alert can lead to decreased fuel efficiency and may escalate into more significant engine damage, which can be costly to repair. Moreover, some underlying problems could pose safety risks, making it crucial to address them promptly. For DIY enthusiasts, the first step should be to use an OBD-II scanner to retrieve diagnostic trouble codes, which can provide insight into the specific issue at hand. By taking immediate action, you not only safeguard your vehicle's performance and longevity but also potentially save on future repair costs by preventing minor issues from developing into major problems. Therefore, while it may not always indicate an emergency, treating the check engine light with the seriousness it deserves is vital for maintaining the health and safety of your Ford Edge.
See what others are asking about their Ford Edge. Get answers from RepairPal's community of auto experts and enthusiasts.
Read about related problems experienced by other Ford Edge drivers like you.
