2007 Ford Crown Victoria Cruise Control Isn't Working

Common Causes of Cruise Control Malfunctions in Your 2007 Ford Crown Victoria and How to Fix Them

Find Repair Location
Reviewed by
Bo Fader
Written by RepairPal Car Genius
Updated January 14, 2025
0%
30% chance it's the
Sensor
0%
25% chance it's the
Control Module
0%
25% chance it's the
Throttle
0%
20% chance it's
Something else
The most common reasons a 2007 Ford Crown Victoria cruise control isn't working are failed control module, sensor or switch issues, or throttle actuation problems.
  • Sensor: A faulty or malfunctioning sensor can lead to incorrect readings, causing issues with engine performance or other systems relying on accurate data.
  • Control Module: A faulty control module can lead to erratic vehicle behavior or failure of various electronic systems due to improper signal processing.
  • Throttle: A faulty throttle body or a defective accelerator pedal position sensor may be causing inconsistent throttle response.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

How much does it cost to fix a 2007 Ford Crown Victoria cruise control isn't working?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

When the throttle position sensor fails, the engine's computer tends to overcompensate with fuel, leading black exhaust coming from the tailpipe. There is a strong possibility of engine misfires, and the check engine light will come on.

Throttle position sensors can also develop "dead spots," or certain places along the throttle curve where it doesn't get a reading. When this happens, the above symptoms can occur but then stop when you further press or let off the gas pedal.

What are the steps to diagnose the cruise control issue in a 2007 Ford Crown Victoria?

To effectively diagnose a cruise control issue in a 2007 Ford Crown Victoria, start with a systematic approach that prioritizes simpler checks before delving into more complex diagnostics. Begin by inspecting the control module and associated sensors, as these are often the root of the problem. Next, check for any blown fuses that could disrupt the cruise control functionality. It’s also beneficial to assess the condition of the brake pedal and throttle body, as any irregularities here can impact the system's performance. While testing the cruise control, try holding the brake pedal up with your left foot to see if this affects the system's response. If these initial checks do not resolve the issue, unplug the electrical connector from the cruise control switch and look for visible damage. Additionally, replacing the cruise control stalk with a known working unit can help determine if the stalk is faulty. For those with 2005 and later models, consider the option of installing a new steering wheel equipped with cruise control switches if necessary. By following this structured diagnostic approach, you can efficiently identify and address the underlying issues affecting the cruise control system.

What are the common problems that could cause the cruise control to stop working in a 2007 Ford Crown Victoria?

When troubleshooting the cruise control system in a 2007 Ford Crown Victoria, it's essential to understand the common problems that may lead to its failure. One of the primary culprits is a faulty brake pedal switch, which is crucial for disengaging the cruise control when the brake is applied. If this switch malfunctions, it can prevent the system from engaging properly. Another frequent issue is a defective speed sensor; this component is vital for maintaining a consistent speed, and if it fails, the cruise control will not function as intended. Additionally, a blown fuse in the vehicle's fuse box can disrupt the electrical flow to the cruise control system, making it inoperable. It's also important to check for vacuum leaks, as these can affect the engine's ability to maintain speed, thereby impacting cruise control functionality. Lastly, a malfunctioning cruise control module may be the root cause of the problem, and in such cases, replacement may be necessary to restore proper operation. By systematically addressing these potential issues, you can effectively diagnose and resolve cruise control problems in your vehicle.

How urgent is it to address the non-functioning cruise control in a 2007 Ford Crown Victoria?

When it comes to the non-functioning cruise control in a 2007 Ford Crown Victoria, the urgency of addressing this issue cannot be overstated. While it may seem like a minor inconvenience, a malfunctioning cruise control system can significantly impact your driving experience and safety. This feature is designed to help maintain a steady speed, which is particularly beneficial during long drives, as it reduces fatigue and enhances fuel efficiency. However, if the system fails, it can lead to erratic speed control, increasing the risk of accidents, especially on highways where consistent speed is crucial for safe traffic flow. Moreover, neglecting this issue could result in further complications, such as damage to the vehicle's electrical system or related components, leading to more extensive and costly repairs. Therefore, it is advisable to have the cruise control system diagnosed and repaired by a qualified mechanic as soon as possible to ensure not only your safety but also the longevity of your vehicle.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.

2007 Ford Crown Victoria Cruise Control Issues & Repairs